418 research outputs found
UNDERDETERMINED SIGNAL REPRESENTATION VIA LINEAR PROJECTIONS USING BINARY SPARSE MATRICES- SIGNAL COMPRESSION
This paper presents and studies analytically a new compressive sensing (CS) approach with the aim of bringing this technique closer to successful commercialization in image sensor circuits. Unlike existing CS techniques that use random measurement matrices (RMM) to encode a signal given in form of a vector of discrete samples, the proposed technique utilizes carefully chosen custom measurement matrices. In CS measurement operation, RMM are often used to achieve small coherence between the measurement matrix and the sparse representation bases. However, when applied in practice, RMM based CS designs typically lead to complicated hardware design and thus have a large circuit overhead to obtain random summations. The proposed custom measurement matrix achieves about the same level of incoherence as the RMMs, but results in a dramatically simplified CS measurement circuit, improving both energy efficiency and circuit scalability, and thus the attractiveness of this technique for industrial commercialization. The proposed method is evaluated analytically in terms of Peak Signal to Noise Ratio (PSNR), a measure for the quality of the reconstructed compared to the original signal. Matlab simulations are also conducted to evaluate the effectiveness of the proposed technique, and to compare simulated and estimated PSNRs. Finally, the proposed technique is extended to two-dimensional projections with the aim of further improving signal quality, in particular with high compression rates. A newly formulated minimization problem is proposed to combine the projections in both dimensions to a single optimization problem
Current Compensation Techniques for Low-voltage High-performance Current Mirror Circuits
This paper presents two current mirror circuits for low-voltage applications. Unlike most current mirrors that use stacked transistors in the output branch to boost the output resistance, the proposed designs use current compensation techniques to achieve high output resistance. By avoiding stacked transistors in the output branch, the minimum output voltages of the proposed circuits are significantly lower compared to those of other current mirror circuits with comparable output resistance. Particularly, the first design emphasizes on reducing the minimum output voltage to an extremely low level of around 20mV. The second design stresses minimizing implementation cost. Compared to a simple current mirror circuit, the second design requires only one additional transistor but boosts the output resistance by more than 10 times. Both circuit analysis and simulations are presented to examine the performance of the proposed designs
Digital LDO modelling techniques for performance estimation at early design stage
This work studies the transient responses and steady-state ripples of digital low dropout (LDO) voltage regulators. Simulation models as well as closed-form expressions are provided for estimating the LDO output settling behaviour after load current or reference voltage changes. Estimation equations for the magnitude and frequency of LDO output steady-state ripples are also presented. The accuracy of the developed models is verified by comparing estimation data with results obtained from circuit simulations. The use of the developed estimation equations in design space exploration is also demonstrated
Design of Scalable Hardware-Efficient Compressive Sensing Image Sensors
This work presents a new compressive sensing (CS) measurement method for image sensors, which limits pixel summation within neighbor pixels and follows regular summation patterns. Simulations with a large set of benchmark images show that the proposed method leads to improved image quality. Circuit implementation for the proposed CS measurement method is presented with the use of current mode pixel cells; and the resultant CS image sensor circuit is significantly simpler than existing designs. With compression rates of 4 and 8, the developed CS image sensors can achieve 34.2 dB and 29.6 dB PSNR values with energy consumption of 1.4 mJ and 0.73 mJ per frame, respectively
Design Techniques for Direct Digital Synthesis Circuits with Improved Frequency Accuracy over Wide Frequency Ranges
Recently, there are increasing interests in impedance sensors for various applications. Direct digital synthesis (DDS) circuits are commonly used in such sensor circuits for generating stimulus signals, due to the advantages of accurate frequency control, drift-free performance, etc. Previously reported DDS circuits for sensor applications typically maintain superb frequency accuracy within relatively small frequency ranges. This paper investigates techniques to improve frequency accuracy over wide frequency ranges. In addition, it presents an analytical framework to estimate the signal to noise ratio (SNR) of the generated signal and derives guidelines for optimizing DDS circuit configurations. Both simulation and hardware measurement results are presented to validate the derived SNR estimation equation as well as the developed frequency accuracy enhancement technique
A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach
An advanced lightweight design in cast aluminium alloys features complexly shaped geometries with strongly varying local casting process conditions. This affects the local microstructure in terms of porosity grade and secondary dendrite arm spacing distribution. Moreover, complex service loads imply changing local load stress vectors within these components, evoking a wide range of highly stressed volumes within different microstructural properties per load sequence. To superimpose the effects of bulk and surface fatigue strength in relation to the operating load sequence for the aluminium alloy EN AC 46200, a layer-based fatigue assessment concept is applied in this paper considering a non-homogeneous distribution of defects within the investigated samples. The bulk fatigue property is now obtained by a probabilistic evaluation of computed tomography results per investigated layer. Moreover, the effect of clustering defects of computed tomography is studied according to recommendations from the literature, leading to a significant impact in sponge-like porosity layers. The highly stressed volume fatigue model is applied to computed tomography results. The validation procedure leads to a scattering of mean fatigue life from −2.6% to 12.9% for the investigated layers, inheriting strongly varying local casting process conditions
Numerical crack growth study on porosity afflicted cast steel specimens
This paper deals with the fatigue assessment of cast steel defects in terms of macroscopic shrinkage porosity. Within preliminary studies, a generalized Kitagawa diagram GKD was established by numerical analyses of V-notched specimens with varying opening angles. It was experimentally verified by the application of the notch stress intensity factor (NSIF) concept on fatigue tests under rotating bending and axial loading. This paper continuous the work by an application of the GKD to real cast steel pores. At first, casting simulations are performed to design representative cast specimen geometries. The study focusses on macroscopic shrinkage pores with different spatial shapes. At second, fatigue tests under axial loading are conducted. Subsequent fracture surface analysis by light optical and scanning electron microscopy provides fracture mechanical based geometry parameters. Finally, the results of the experiments related to the failure relevant defect sizes are assessed by the GKD. In order to define an equivalent defect size of the complexly shaped defects, numerical crack growth analyses are performed demonstrating crack coalescence path tendencies. Summing up, the application of the NSIF approach based on a GKD shows a sound accordance to the experimental results and thus provides an engineering-feasible fatigue assessment method of cast steel components with macroscopic imperfections
The role of individual compensation and acceptance decisions in crowdsourced delivery
High demand, rising customer expectations, and government regulations are
forcing companies to increase the efficiency and sustainability of urban
(last-mile) distribution. Consequently, several new delivery concepts have been
proposed that increase flexibility for customers and other stakeholders. One of
these innovations is crowdsourced delivery, where deliveries are made by
occasional drivers who wish to utilize their surplus resources (unused
transport capacity) by making deliveries in exchange for some compensation. In
addition to reducing delivery costs, the potential benefits of crowdsourced
delivery include better utilization of transport capacity, a reduction in
overall traffic, and increased flexibility (by scaling up and down delivery
capacity as needed). The use of occasional drivers poses new challenges because
(unlike traditional couriers) neither their availability nor their behavior in
accepting delivery offers is certain. The relationship between the compensation
offered to occasional drivers and the probability that they will accept a task
has been largely neglected in the scientific literature. Therefore, we consider
a setting in which compensation-dependent acceptance probabilities are
explicitly considered in the process of assigning delivery tasks to occasional
drivers. We propose a mixed-integer nonlinear model that minimizes the expected
delivery costs while identifying optimal assignments of tasks to a mix of
traditional and occasional drivers and their compensation. We propose exact
linearization schemes for two practically relevant probability functions and an
approximate linearization scheme for the general case. The results of our
computational study show clear advantages of our new approach over existing
ones
In-medium Hadrons - Properties, Interaction and Formation
In this talk various aspects of in-medium behavior of hadrons are discussed
with an emphasis on observable effects. Examples for theoretical predictions of
in-medium spectral functions are given and the importance of resonance-hole
excitations is stressed. It is also stressed that final state interactions can
have a major effect on observables and thus have to be considered as part of
the theory. This is demonstrated with examples from neutrino-nucleus
interactions. Finally, the possibility to access hadron formation times in
high-energy photonuclear (or neutrino-induced) reactions is illustrated.Comment: Invited talk given by U. Mosel at Vth Conference on Hadronic Physics,
ICTP, Trieste, May 200
- …