Laser Peening Induced Shock Waves and Cavitation Bubbles in Water Studied by Optical Schlieren Visualization

AbstractA temporal and spatial study of the dynamics of generated shock waves and cavitation bubbles in water by laser peening using nanosecond Nd:YAG laser pulses is reported. False schlieren photographs of the zone surrounding the laser spot on the target were recorded by a fast ICCD camera. The developed experimental setup allowed us to obtain a visualization of the different phenomena (hemispherical, cylindrical and plane shock fronts, cavitation bubbles, phase disturbance tracks, plasma formation, etc.) that occur after the arrival of the laser pulse and that contain valuable information about the mechanical processes that take place on the sample

The low-mass diskless population of Corona Australis

We combine published optical and near-infrared photometry to identify new low-mass candidate members in an area of about 0.64 deg^2 in Corona Australis with the S-parameter method. Five new candidate members of the region are selected. They have estimated ages between 3 and 15 Myr and masses between 0.05 and 0.15 M_⊙. With Spitzer photometry we confirm that these objects are not surrounded by optically thick disks. However, one of them is found to display excess at 24 μm, thus suggesting it harbors a disk with an inner hole. With an estimated mass of 0.07 M_⊙ according to the SED fitting, this is one of the lowest-mass objects reported to possess a transitional disk. Including these new members, the fraction of disks is about 50% among the total Corona Australis population selected by the same criteria, lower than the 70% fraction reported earlier for this region. Even so, we find a ratio of transitional to primordial disks (45%) very similar to the value derived by previous authors. This ratio is higher than for solar-type stars (5–10%), suggesting that disk evolution is faster in the latter, and/or that the “transitional disk” stage is not such a short-lived step for very low-mass objects. However, this impression needs to be confirmed with better statistics

Primeval very low-mass stars and brown dwarfs - IV. New L subdwarfs, Gaia astrometry, population properties, and a blue brown dwarf binary

30 pages, 23 figuresWe present 27 new L subdwarfs and classify five of them as esdL and 22 as sdL. Our L subdwarf candidates were selected with the UKIRT Infrared Deep Sky Survey and Sloan Digital Sky Survey. Spectroscopic follow-up was carried out primarily with the OSIRIS spectrograph on the Gran Telescopio Canarias. Some of these new objects were followed up with the X-shooter instrument on the Very Large Telescope. We studied the photometric properties of the population of known L subdwarfs using colour-spectral type diagrams and colour-colour diagrams, by comparison with L dwarfs and main-sequence stars, and identified new colour spaces for L subdwarf selection/study in current and future surveys. We further discussed the brown dwarf transition-zone and the observational stellar/substellar boundary. We found that about one-third of 66 known L subdwarfs are substellar objects, with two-thirds being very low-mass stars. We also present the Hertzsprung-Russell diagrams, spectral type-absolute magnitude corrections, and tangential velocities of 20 known L subdwarfs observed by the Gaia astrometry satellite. One of our L subdwarf candidates, ULAS J233227.03+123452.0, is a mildly metal-poor spectroscopic binary brown dwarf: a ~L6p dwarf and a ~T4p dwarf. This binary is likely a thick disc member according to its kinematics.Peer reviewedFinal Accepted Versio

Study of GaAs(Ti) thin films as candidates for IB solar cells manufacturing

Thin films of GaAs(Ti) have been deposited by sputtering on glass and n_GaAs substrates under different process conditions. Optical characteristics of these samples have been analyzed to study the potential of this material in intermediate Band solar cell manufacturin

Importance of frequency and intensity of strength training for work ability among physical therapists

The aim of the study was to evaluate the association between frequency and intensity of strength training participation and work ability among physical therapists (PTs). The Work Ability Index questionnaire (WAI) and a questionnaire about participation in strength training during leisure time were administered to a sample of Spanish PTs. In addition, participants provided information on gender, age, body mass index, education, substance use, working experience and working hours per week. The odds for having excellent WAI (score 44–49) as a function of intensity or frequency of strength training participation were determined using binary logistic regression controlled for various confounders. Data from 981 PTs were analysed. High-intensity strength training (> 80% 1 RM) showed strong associations with excellent WAI (odds ratio = 9.7; 95% confidence interval, 2.9–31.6). In addition, performing strength training more than 3 times per week was associated with excellent WAI (odds ratio = 1.79; 95% confidence interval, 1.24–2.59), however, no significant associations were found with lower levels of frequency and intensities. High-intensity strength training 3 times per week is associated with excellent WAI among PTs. Training programs meeting these features may importantly contribute to maintain or improve WAI

Movement representation strategies as a tool for educational innovation in physiotherapy students: a randomized single-blind controlled-pilot trial

Physiotherapy has a strictly theoretical body of knowledge, but for the most part, the physiotherapist’s learning is practical. The practical part is fundamental to acquire clinical skills that the physiotherapist will later use in professional practice. The main aim of this study was to assess the effectiveness of movement representation strategies (MRS) in the improvement of manual skills of physiotherapy students as an educational innovation strategy. We randomly assigned 30 participants to an action observation practice (AOP), motor imagery practice (MIP), or sham observation (SO) group. A high velocity, low amplitude lumbar manipulation technique that is widely used in clinical physiotherapy practice was taught in one session. The primary outcomes were required time and test score. The secondary outcomes were perceived mental fatigue and perceived difficulty for learning. The outcomes were assessed preintervention and immediately after the intervention (postintervention). The main results showed that both AOP and MIP improved the total time required and the test score, as well as entailed less perceived difficulty for learning. However, both strategies showed a higher level of mental fatigue after the intervention, which was higher in the MIP group. Based on the results obtained, it seems that the application of MRS promotes greater learning of manual motor tasks in physiotherapy students and could be used as educational innovation strategies

Different methodologies for calculating crown volume of Platanus hispanica trees by terrestial laser scanner and comparison with classical dendrometric measurements

Terrestrial laser scanners (TLSs) are used in forestry and fruit culture applications to perform a threedimensional geometrical characterization of trees and so make it easier to develop management systems based on that information. In addition, this data can improve the accuracy of dendrometric variable estimations, such as crown volume, obtained by standard methods. The main objective of this paper is to compare classical methods for crown volume estimation with the volumes obtained from the processing of point clouds obtained using a terrestrial laser scanner (TLS) on urban Platanus hispanica trees. This will allow faster quantification of residual biomass from pruning and therefore an improved management in future. The methods applied using TLS data were also evaluated in terms of processing speed. A set of 30 specimens were selected and their main dendrometric parameters (such as diameter breast height, crown diameter, total height, and distance from the crown base to the soil) were manually measured using classical methods. From these dendrometric parameters, the apparent crown volumes were calculated using three geometric models: cone, hemisphere, and paraboloid. Simultaneously, these trees were scanned with a Leica ScanStation2. A laser point cloud was registered for each tree and processed to obtain the crown volumes. Four processing methods were analyzed: (a) convex hull (an irregular polyhedral surface formed by triangles that surround the crown) applied to the whole point cloud that forms the crown; (b) convex hull using slices of 10 cm in height from the top to the base of the crown; (c) XY triangulation in horizontal sections; and (d) voxel discretization. All the obtained volumes (derived from classical methods and TLS) were assessed and compared. The regression equations that compare the volumes obtained by dendrometry and those derived from TLS data showed coefficients of determination (R2) greater than 0.78. The highest R2 (0.89) was obtained in the comparison between the volume calculated using a paraboloid and flat sections, which was also the fastest method. These results show the potential of TLS for predicting the crown volumes of urban trees, such as P. hispanica, to help improve their management, especially the quantification of residual biomass.The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation in the framework of the Project AGL2010-15334 and by the Generalitat Valenciana in the framework of the Project GV/2012/003.Fernández-Sarría, A.; Martínez, L.; Velázquez Martí, B.; Sajdak, M.; Estornell Cremades, J.; Recio Recio, JA. (2013). Different methodologies for calculating crown volume of Platanus hispanica trees by terrestial laser scanner and comparison with classical dendrometric measurements. Computers and Electronics in Agriculture. 90(1):176-185. https://doi.org/10.1016/j.compag.2012.09.017S17618590

An exploratory, large-scale study of pain and quality of life outcomes in cancer patients with moderate or severe pain, and variables predicting improvement

Background There have been few large-scale, real world studies in Spain to assess change in pain and quality of life (QOL) outcomes in cancer patients with moderate to severe pain. This study aimed to assess changes on both outcomes after 3 months of usual care and to investigate factors associated with change in QoL. Patients and methods Large, multi-centre, observational study in patients with lung, head and neck, colorectal or breast cancer experiencing a first episode of moderate to severe pain while attending one of the participating centres. QoL was assessed using the EuroQol-5D questionnaire and pain using the Brief Pain Inventory (BPI). Instruments were administered at baseline and after 3 months of follow up. Multivariate analyses were used to assess the impact of treatment factors, demographic and clinical variables, pain and other symptoms on QoL scores. Results 1711 patients were included for analysis. After 3 months of usual care, a significant improvement was observed in pain and QoL in all four cancer groups (p<0.001). Effect sizes were medium to large on the BPI and EQ-5D Index and Visual Analogue Scale (VAS). Improvements were seen on the majority of EQ-5D dimensions in all patient groups, though breast cancer patients showed the largest gains. Poorer baseline performance status (ECOG) and the presence of anxiety/depression were associated with significantly poorer QOL outcomes. Improvements in BPI pain scores were associated with improved QoL. Conclusion In the four cancer types studied, pain and QoL outcomes improved considerably after 3 months of usual care. Improvements in pain made a substantial contribution to QoL gains whilst the presence of anxiety and depression and poor baseline performance status significantly constrained improvementFinancial support for this research was provided by Mundipharma Pharmaceuticals S.L

Physical and Quality of Life Changes in Elderly Patients after Laparoscopic Surgery for Colorectal Cancer-A Prospective Cohort Study

Background—The incidence of colorectal cancer is increasing among elderly people, where postoperative complications are frequent. Methods—We evaluated postoperative physical and quality of life changes in elderly patients undergoing laparoscopic surgery for colorectal cancer. A prospective cohort study was performed in 31 colorectal cancer patients ≥60 years who were scheduled for laparoscopic surgery due to colorectal cancer. Outcomes were measured one month preoperative (T1), three days postoperative (T2) and one month postoperative (T3). Results—The largest early postoperative (from T1 to T2) declines were observed for isometric knee extension strength (33.1%), 30 s Chair Stand Test (27.9%) and handgrip strength (16.9%). Significant reductions in quality of life measured with the QLQ-C30 summary score and the EQ 5D index score were found between T1–T3 and T1–T2, respectively. Conclusions—A decline in isometric knee extension strength, 30 s Chair Stand Test, handgrip strength and quality of life is evident in elderly patients in the days following laparoscopic surgery for colorectal cancer. Preoperative values are recovered one month after surgery for all the outcomes, except for isometric knee extension, which should receive especial attention

Residual biomass calculation from individual tree architecture using terrestrial laser scanner and ground-level measurements

Large quantity of residual biomass with possible energy and industrial end can be obtained from management operations of urban forests. The profitability of exploiting this resource is conditioned by the amount of existing biomass within urban community ecosystems. Prior research pointed out that residual biomass from Platanus hispanica and other tree species can be calculated from dendrometric parameters. In this study, two approaches have been analyzed: First, applicability of TLS was tested for residual biomass calculation from crown volume. In addition, traditional models for residual biomass prediction were developed from dendrometric parameters (tree height, crown diameter, and diameter at breast height). Next, a comparison between parameters obtained with both methodologies (standard methodologies vs TLS) was carried out. The results indicate a strong relationship (R2 = 0.906) between crown diameters and between total tree heights (R2 = 0.868). The crown volumes extracted from the TLS point cloud were calculated by 4 different methods: convex hull; convex hull by slices of 5 cm height in the XY plane; triangulation by XY flat sections, and voxel modeling. The highest accuracy was found when the voxel method was used for pruned biomass prediction (R2 = 0.731). The results revealed the potential of TLS data to determine dendrometric parameters and biomass yielded from pruning quitar of urban forestsFernández-Sarría, A.; Velázquez Martí, B.; Sajdak, M.; Martinez, L.; Estornell Cremades, J. (2013). Residual biomass calculation from individual tree architecture using terrestrial laser scanner and ground-level measurements. Computers and Electronics in Agriculture. 93:90-97. doi:10.1016/j.compag.2013.01.012S90979