795 research outputs found
A general advancing front technique for filling space with arbitrary objects
An advancing front spaceâfilling technique for arbitrary objects has been developed. The input required consists of the specification of the desired mean point distance in space and an initial triangulation of the surface. One object at a time is removed from the active front, and, if possible, surrounded by admissible new objects. This operation is repeated until no active objects are left. Two techniques to obtain maximum packing are discussed: closest object placement (during generation) and move/enlarge (after generation). Different deposition or layering patterns can be achieved by selecting the order in which objects are eliminated from the active front. Timings show that for simple objects like spheres the scheme is considerably faster than volume mesh generators based on the advancing front technique, making it possible to generate large (> 106) yet optimal clouds of points in a matter of minutes on a PC. For more general objects, the performance may degrade depending on the complexity of the penetration checks. Several examples are included that demonstrate the capabilities of the technique. 
Advancing front techniques for filling space with arbitrary separated objects
A review is given of advancing front techniques for filling space with arbitrary separated objects. Over the last decade, these techniques have reached a considerable degree of maturity and are being used to generate clouds of points for SPH and FPM simulations, as well as spheres, ellipsoids, objects defined by a collection of spheres or polyhedral objects for DEM simulations. Algorithmic as well as implementational aspects are discussed. Techniques to obtain maximum packing, such as closest object placement (during generation) and move/enlarge (after generation) are also considered. Several examples are included that demonstrate the capabilities developed
An advancing front point generation technique
An algorithm to construct boundaryâconforming, isotropic clouds of points with variable density in space is described. The input required consists of a specified mean point distance and an initial triangulation of the surface. Borrowing a key concept from advancing front grid generators, one point at a time is removed and, if possible, surrounded by admissible new points. This operation is repeated until no active points are left. Timings show that the scheme is about an order of magnitude faster than volume grid generators based on the advancing front technique, making it possible to generate large (>106) yet optimal clouds of points in a matter of minutes on a workstation. Several examples are included that demonstrate the capabilities of the technique. 
An advancing front technique for filling space with arbitrary separated objects
An advancing front technique for filling space with arbitrary, separated objects has been developed. The input required consists of the specification of the desired object type, the mean object size, the distance between objects in space, as well as an initial triangulation of the surface. The objects are assumed to be described by a coarse mesh of tetrahedra. One face at a time is removed from the active front, and, if possible, surrounded by admissible new objects. This operation is repeated until no active faces are left. Two techniques to obtain maximum packing are discussed: closest object placement (during generation) and move/enlarge (after generation). Several examples are included that demonstrate the capabilities of the technique. Copyright © 2009 John Wiley & Sons, Ltd
Absolute velocity measurements in sunspot umbrae
In sunspot umbrae, convection is largely suppressed by the strong magnetic
field. Previous measurements reported on negligible convective flows in umbral
cores. Based on this, numerous studies have taken the umbra as zero reference
to calculate Doppler velocities of the ambient active region. To clarify the
amount of convective motion in the darkest part of umbrae, we directly measured
Doppler velocities with an unprecedented accuracy and precision. We performed
spectroscopic observations of sunspot umbrae with the Laser Absolute Reference
Spectrograph (LARS) at the German Vacuum Tower Telescope. A laser frequency
comb enabled the calibration of the high-resolution spectrograph and absolute
wavelength positions. A thorough spectral calibration, including the
measurement of the reference wavelength, yielded Doppler shifts of the spectral
line Ti i 5713.9 {\AA} with an uncertainty of around 5 m s-1. The measured
Doppler shifts are a composition of umbral convection and magneto-acoustic
waves. For the analysis of convective shifts, we temporally average each
sequence to reduce the superimposed wave signal. Compared to convective
blueshifts of up to -350 m s-1 in the quiet Sun, sunspot umbrae yield a
strongly reduced convective blueshifts around -30 m s-1. {W}e find that the
velocity in a sunspot umbra correlates significantly with the magnetic field
strength, but also with the umbral temperature defining the depth of the
titanium line. The vertical upward motion decreases with increasing field
strength. Extrapolating the linear approximation to zero magnetic field
reproduces the measured quiet Sun blueshift. Simply taking the sunspot umbra as
a zero velocity reference for the calculation of photospheric Dopplergrams can
imply a systematic velocity error.Comment: 10 pages, 7 figures, 2 tables, Appendix with 5 figure
An unstructured grid-based, parallel free surface solver
An unstructured grid-based, parallel-free surface solver is presented. The overall scheme combines a finite-element, equal-order, projection-type 3-D incompressible flow solver with a finite element, 2-D advection equation solver for the free surface equation. For steady-state applications, the mesh is not moved every timestep, in order to reduce the cost of geometry recalculations and surface repositioning. A number of modifications required for efficient processing on shared-memory, cache-based parallel machines are discussed, and timings are shown that indicate scalability to a modest number of processors. The results show good quantitative comparison with experiments and the results of other techniques. The present combination of unstructured grids (enhanced geometrical flexibility) and good parallel performance (rapid turnaround) should make the present approach attractive to hydrodynamic design simulations
Large-scale simulation of flows with violent free surface motion
A Volume of Fluid (VOF) technique has been developed and coupled
with an incompressible Euler/Navier Stokes solver operating on adaptive, unstructured grids to simulate the interactions of extreme waves and three-dimensional structures. The present implementation follows the classic VOF implementation for the liquid-gas system, considering only the liquid phase. Extrapolation algorithms to obtain velocities and pressure in the gas region near the free surface have been implemented. The VOF technique is validated against the classic dam-break problem, as well as series of 2-D sloshing experiments and results from SPH calculations. These and a series of other examples demonstrate that the present CFD method is capable of simulating violent free surface fows with strong nonlinear behaviour.Postprint (published version
On the simulation of flows with violent free surface motion
Postprint (published version
Mammographic Image Segmentation using Edge Based Deformable Contour Models
_____________________________________________________________ This is an author produced version of a paper published in : Cronfa URL for this paper: When uploading content they are required to comply with their publisher agreement and the SHERPA RoMEO database to judge whether or not it is copyright safe to add this version of the paper to this repository. http://www.swansea.ac.uk/iss/researchsupport/cronfa-support/ ABSTRACT Deformable contour models, also known as snakes, are commonly used in image processing and computer vision due to their natural handling of shape variation and independence of operation (once initialized), which make them highly appropriate to segment mass lesions in digital (or digitized) mammographic images. The extracted shape and texture information through contour based segmentation are useful in determining benignancy or malignancy. In this paper, we present a preliminary sudy on comparative analysis of four edge based active contour models in segmenting mass lesions in mammogram images. Two of them are widely used, classic active contour models and the other two are most recent advances in active contouring. Experiments are carried out to compare their accuracy, as well as the ability in handling weak edges and difficult initializations
Adaptive image ray-tracing for astrophysical simulations
A technique is presented for producing synthetic images from numerical
simulations whereby the image resolution is adapted around prominent features.
In so doing, adaptive image ray-tracing (AIR) improves the efficiency of a
calculation by focusing computational effort where it is needed most. The
results of test calculations show that a factor of >~ 4 speed-up, and a
commensurate reduction in the number of pixels required in the final image, can
be achieved compared to an equivalent calculation with a fixed resolution
image.Comment: 4 pages, 1 figure. Accepted for publication in MNRA
- âŠ