Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table

Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter

Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos corrected, new section added, figures regrouped. Accepted for publication in JINS

Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter

The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single positive pions and protons with initial momenta in the range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron showers are parametrised with two-component functions. The parametrisation is fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics lists from Geant4 version 9.6. The parameters extracted from data and simulated samples are compared for the two types of hadrons. The response to pions and the ratio of the non-electromagnetic to the electromagnetic calorimeter response, h/e, are estimated using the extrapolation and decomposition of the longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to JINS

Evidence for a vector charmonium-like state in e+e−→Ds+Ds2∗(2573)−+c.c.e^+e^- \to D^+_sD^*_{s2}(2573)^-+c.c.

We report the measurement of $e^+e^- \to D^+_sD^*_{s2}(2573)^-+c.c.$ via initial-state radiation using a data sample of an integrated luminosity of 921.9 fb$^{-1}$ collected with the Belle detector at the $\Upsilon(4S)$ and nearby. We find evidence for an enhancement with a 3.4$\sigma$ significance in the invariant mass of $D^+_sD^*_{s2}(2573)^- +c.c.$ The measured mass and width are $(4619.8^{+8.9}_{-8.0}({\rm stat.})\pm2.3({\rm syst.}))~{\rm MeV}/c^{2}$ and $(47.0^{+31.3}_{-14.8}({\rm stat.})\pm4.6({\rm syst.}))~{\rm MeV}$, respectively. The mass, width, and quantum numbers of this enhancement are consistent with the charmonium-like state at 4626 MeV/$c^2$ recently reported by Belle in $e^+e^-\to D^+_sD_{s1}(2536)^-+c.c.$ The product of the $e^+e^-\to D^+_sD^*_{s2}(2573)^-+c.c.$ cross section and the branching fraction of $D^*_{s2}(2573)^-\to{\bar D}^0K^-$ is measured from $D^+_sD^*_{s2}(2573)^-$ threshold to 5.6 GeV.Comment: 9 pages, 4 figure

Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter

A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques

Measurement of the Branching Fraction of the Decay B+→π+π−ℓ+νℓ\boldsymbol{B^{+}\to\pi^{+}\pi^{-}\ell^{+}\nu_\ell} in Fully Reconstructed Events at Belle

We present an analysis of the exclusive $B^{+}\to\pi^{+}\pi^{-}\ell^{+}\nu_{\ell}$ decay, where $\ell$ represents an electron or a muon, with the assumption of charge-conjugation symmetry and lepton universality. The analysis uses the full $\Upsilon(4S)$ data sample collected by the Belle detector, corresponding to 711 fb$^{-1}$ of integrated luminosity. We select the events by fully reconstructing one $B$ meson in hadronic decay modes, subsequently determining the properties of the other $B$ meson. We extract the signal yields using a binned maximum-likelihood fit to the missing-mass squared distribution in bins of the invariant mass of the two pions or the momentum transfer squared. We measure a total branching fraction of ${{\cal B}(B^{+}\to \pi^{+}\pi^{-}\ell^{+}\nu_{\ell})= [22.7 ^{+1.9}_{-1.6} (\mathrm{stat}) \pm 3.5(\mathrm{syst}) ]\times 10^{-5}}$, where the uncertainties are statistical and systematic, respectively. This result is the first reported measurement of this decay.Comment: 23 pages, 19 figure

The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers

The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS

Belle II Executive Summary

Belle II is a Super $B$ Factory experiment, expected to record 50 ab$^{-1}$ of $e^+e^-$ collisions at the SuperKEKB accelerator over the next decade. The large samples of $B$ mesons, charm hadrons, and tau leptons produced in the clean experimental environment of $e^+e^-$ collisions will provide the basis of a broad and unique flavor-physics program. Belle II will pursue physics beyond the Standard Model in many ways, for example: improving the precision of weak interaction parameters, particularly Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and phases, and thus more rigorously test the CKM paradigm, measuring lepton-flavor-violating parameters, and performing unique searches for missing-mass dark matter events. Many key measurements will be made with world-leading precision.Comment: 7 pages, to be submitted to the "Rare and Precision Measurements Frontier" of the APS DPF Community Planning Exercise Snowmass 202