410 research outputs found
Kemal Tahir'in notları
Taha Toros Arşivi, Dosya No: 133-Kemal Tahir ve Yorgun Savaşçı.
Not: 22 Mart - 1 Nisan 1989 tarihleri arasında yayımlanmış dizi yazısıdır.Unutma İstanbul projesi İstanbul Kalkınma Ajansı'nın 2016 yılı "Yenilikçi ve Yaratıcı İstanbul Mali Destek Programı" kapsamında desteklenmiştir. Proje No: TR10/16/YNY/0101‘Satılmış alçaklardan değilim’Kemal Tahir'in kaleminden Devlet Ana eleştirisiTİMURLENK Bati ajanıydıGüneşin altındaki yerimizi arıyoruzŞeytan aldatmacasıOsmanlılıkta iki batılaşmaKurtuluş diye ölüme çağrıMarks'ın ın eserleri Kuran değildirKemal Tahir'den 12 Mart eleştiricisi: Hem cuntacı hem devrimci olunmazKemal Tahir arkadaşlarına yazdığı mektupta geleceğini görüyor: Büyük edebiyat hareketleri doğacakCezaevi mektuplar
Geç Osmanlı dönemi devlet fabrikalarında personel yönetimi : arşiv kaynaklarına dayalı bir araştırma.
06.03.2018 tarihli ve 30352 sayılı Resmi Gazetede yayımlanan “Yükseköğretim Kanunu İle Bazı Kanun Ve Kanun Hükmünde Kararnamelerde Değişiklik Yapılması Hakkında Kanun” ile 18.06.2018 tarihli “Lisansüstü Tezlerin Elektronik Ortamda Toplanması, Düzenlenmesi ve Erişime Açılmasına İlişkin Yönerge” gereğince tam metin erişime açılmıştır.Bu çalışmada, Osmanlı Devleti'nde uygulanan sanayileşme politikaları kapsamında kurulan devlet fabrikalarındaki (Fabrika-i Hümayun) işletmecilik uygulamaları içerisinde yer alan personel yönetimi ile ilgili anlayış ve uygulamaların neler olduğunun ortaya konması amaçlanmıştır. Yönetim çalışmaları alanında tarih yazımı (historiography) tekniğiyle yapılan çalışmanın veri toplama aşamasında nitel araştırma yöntemlerinden olan arşiv kaynaklarına dayalı doküman incelemesi tekniği uygulanmıştır. Çalışma kapsamında YÖK ulusal tez merkezi, kütüphaneler, çevrim içi veri tabanlarından faydalanılmasının yanı sıra, arşiv taraması sürecinde 263 farklı kelime kombinasyonu ile yapılan arama sonucunda 126.827 adet belge içerisinden 4.539 belge okunmuş ve transkripsiyon yaptırılmıştır. Çalışmada ulaşılan bulgular, incelenen dönemde işe alım, görev tanımları, iş eğitimi, ödüllendirme, iş sonrası sosyal haklar gibi uygulamaların yoğun ve birbirini tekrarlayan biçimde yer aldığını göstermektedir.In this thesis, it is aimed to reveal the perspectives and practices about personnel management in the business administration applications in the state factories (Fabrika-i Humayun) founded in the Ottoman State within the scope of industrilization policies. This thesis which is in the area of management studies was written by historiography method. In the study, data research method, which is among the qualitative research method, was applied. In the study, besides making use of YÖK (The Counsil of Higher Education) National Thesis Center, libraries, online databases, 4.539 documents among 126.827 ones were read and transcripted in the process of the archive review as a result of the research done with the use of 263 different word combinations. The findings reached in the study reveals that in the period investigated, the applications like recruiment, job definiton, job training, rewarding and social rights after unemplyment were intensely and repetitiously used
Eine kritisch-kontrastive Darstellung der Kognitiven Linguistik
This article attempts a brief introduction on the topic of cognitive sciences. By emphasizing cognitive linguistics, which separates in two positions will be part of the cognitive Sciences expressed with their linguistic function and is the heart matter, stands for a criticism about their lack of diagnostics. These positions of cognitive linguistics, whose paper are the neuro-linguistics and the cognitive linguistics, are presented in detail and both cognitively linguistic point of views are questioned for their scientific validity. Cognitive Linguistics is a field of cognitive science understood. Cognitive science tries with their research on Imitate human brain, which has arisen from this area, and also Artificial Intelligent researches in which the brain researchers with their colleagues from the field of computer technology try to develop artificialintelligence as an objective. The contribution of the linguistic component directs the Cognitive Linguistics in their research
Experimental investigation of thermal comfort performance of a radiant wall and ceiling panel system
The number of radiant heating-cooling systems in building applications is increasing it is because of low energy consumption, low operating temperature and high values they provide in terms of working compatibility with renewable energy sources. In this study, ground source heat pump integrated radiant panels installed on the wall and suspended ceiling of the office room in Yıldız Technical University Science and Technology Application and Research Centre were experimentally examined in terms of thermal comfort according to the relevant standards. Vertical air temperature differences and mean radiant temperatures were investigated. The mean air temperature differences at 0.1 m and 1.7 m were found to be 3,9 oC 2.9 oC 3.5 oC, 3.1 oC and 3.4 oC on average for the five different stands, respectively. PMV and PPD values were found to be 0.78 and 18.9% for February 12 (Case 1), 0.36 and 8.4% for February 13 (Case 2), respectively. In the experiment carried out under the conditions of Case 2, while the comfort conditions were provided in almost all of the day, the desired comfort conditions could not be achieved in Case 1 after 11 am. © 2022. All Rights Reserved.Yildiz Teknik Üniversitesi: FBA-2019-3703This study was supported by Yıldız Technical University under BAP program with GRANT No. FBA-2019-3703. We would like to thank to the Yıldız Technical University for their financial support during this work
Modal identification of a reduced-scale masonry arch bridge with experimental measurements and finite element method
This study aims to investigate modal parameters such as mode shapes, natural frequencies and damping ratios of a reduced scale one-span historical masonry arch bridge constructed in laboratory conditions by performing numerical and experimental analysis. Sarp Dere historical masonry bridge, in Ordu, Ulubey, has 15.5m in length and 4.75m in width was chosen as a prototype model. The reduced-scale bridge model and structural details were carried out in the scale of 1:12.5. Operational Modal Analysis (OMA) technique was used for experimental study. The experimental modal parameters of the bridge model were figured out by using Enhanced Frequency Domain Decomposition (EFDD). ANSYS software was used to create 3D finite element (FE) model and to expose the analytical modal parameters of the reduced-scaled bridge model. Moreover, FE model of the reduced-scale bridge model was calibrated based on the experimental results by using the Response Surface based FE model calibration technique to obtain more accurate results. The analysis results of experimental, initial and calibrated FE model were compared. It is noted that there are significant differences between the modal parameters obtained from experimental and initial FE model. Model calibration techniques are beneficial to get a more reasonable FE model
Traditional and New Types of Passive Flow Control Techniques to Pave the Way for High Maneuverability and Low Structural Weight for UAVs and MAVs
Prevailing utilization of airfoils in the design of micro air vehicles and wind turbines causes to gain attention in terms of determination of flow characterization on these flight vehicles operating at low Reynolds numbers. Thus, these vehicles require flow control techniques to reduce flow phenomena such as boundary layer separation or laminar separation bubble (LSB) affecting aerodynamic performance negatively. This chapter presents a detailed review of traditional passive control techniques for flight vehicle applications operating at low Reynolds numbers. In addition to the traditional methods, a new concept of the pre-stall controller by means of roughness material, flexibility and partial flexibility is highlighted with experimental and numerical results. Results indicate that passive flow control methods can dramatically increase the aerodynamic performance of the aforementioned vehicles by controlling the LSB occurring in the pre-stall region. The control of the LSB with new concept pre-stall control techniques provides lift increment and drag reduction by utilizing significantly less matter consumption and low energy. In particular, new types of these methods presented for the first time by the chapter’s authors have enormously influenced the progress of separation and LSB, resulting in postponing of the stall and enhancing the aerodynamic performance of wind turbine applications
Strategic Planning Process And It's Importance For Organizations
Küreselleşme ve sonucunda rekabetin olduğu tüm alanlarda stratejik planlama kavramı önem kazanmıştır. Ne yazık ki birçok ülkede stratejik planlama büyük işletmelerin bir parçasıdır ve küçük işletmelerin çoğunun stratejik bir planı yoktur. Stratejik planlama geleceğin belirsizliklerini minimize etmek ve sürdürülebilir rekabet üstünlüğü sağlamak açısından oldukça önemlidir. Bu çalışmada, stratejik planlama süreci ve bunun örgütler açısından önemi tartışılmaktadır.AbstractAs a result of globalization and competition has gained in importance in all areas of strategic planning concepts. Unfortunately, strategic planning is a part of large enterprises in many countries; most of small enterprises do not have any strategic plan. Strategic planning is very important to minimize the uncertainty of future and to provide sustainable competitive advantages. In this study, strategic planning process and its importance fort he organizations are discussed
ZORLU DIŞKALAMAYA BAĞLI SPONTAN VARİKOSEL RÜPTÜRÜ
Zorlamaya bağlı spontan sol varikosel rüptürü olgusu sunulmuştur. Zorlu dışkılama sonrası sol skrotumda şişlik ve ağrı yakınmasıyla gelen 21 yaşındaki erkek hastada varikosel rüptürü tanısı konuldu. Doppler ultrasonografi ile sol testiste hematom, sol testisi saran alanda kan akımı ve sol spermatik vende reflü akım izlendi. Hasta konservatif takip sonrası ameliyat edildi. We report a case of strain-induced spontaneous rupture of left varicocele. Varicocele rupture was diagnosed in a 21-year-old man who presented with swelling and pain in the left scrotum of sudden onset after straining for defecation. Doppler ultrasound revealed a hematoma and escaping to the left peritesticular space and, reflux of blood in the left spermatic vein. The patient underwent an operation after conservative follow-up
Different treatment modalities and outcomes in cesarean scar pregnancy: a retrospective analysis of 31 cases in a unıversity hospital
Objectives: There is no standardized treatment modality or a generally accepted guideline in cesarean scar pregnancy (CSP) treatment. The aim of this study is to retrospectively evaluate the outcomes of the different treatment modalities used in CSP treatment.
Material and methods: 31 CSP patients retrospectively evaluated between May 2011 and February at Uludag University Hospital in Bursa, Turkey included in the study. A graphical flowchart according to the treatment modalities and timeline graphics of the patients were used. Main outcome measures were recurrent CSPs and healthy pregnancies in clinical follow-up after a successful CSP treatment.
Results: 31 CSP patients were treated with six different treatment modalities in our series. Recurrent CSP was diagnosed in three patients after a successful CSP treatment. All of these recurrent CSPs were treated with D/C procedure in their first CSP. Six patients conceived again in clinical follow-up after successful treatment of CSP.
Conclusions: CSP is a serious maternal complication that risks the mother’s life, and this problem is growing because of the increased cesarean rates. Invasive procedures applied to the uterus in CSP treatment may cause recurrent CSP in the next pregnancy of the patient. When considering the treatment options of the CSP, minimally invasive treatment modalities and the subsequent gestation of the patient should be taken into account
- …