Synthesis and structural characterisation of unprecedented primary N -nitrosamines coordinated to iridium(IV)

The redox chemistry of the N-nitrosamine complexes [IrCl5(RN(H)NO)]2- (R = benzyl or n-butyl) was studied in detail. One-electron oxidations at around 200 mV vs. ferrocene/ferrocenium were reversible in cyclic voltammograms. UV-vis spectroelectrochemistry reveals spectra characteristic of IrIV species but also partial decomposition of the oxidised species [IrIVCl5(RN(H)NO)]- on this timescale (minutes). Detailed studies on chemically oxidised solutions of the parent IrIII complexes gave evidence for paramagnetic IrIV from NMR spectra. Final products of the decomposition were the corresponding alcohols and presumably [IrIIICl5(L)]2- (L = N2, solvent, amine) complexes. Similar decomposition reactions of acidic DMSO solutions of [IrCl5(RN(H)NO)]2-revealed that this combination produces the so-called "activated" DMSO (Me2S+-O- or Me2S+-OE, with "E" being an electrophile) which oxidises the parent IrIII complexes. Finally, with the very reactive purple IrIV compound (PPh4)[IrCl5(BnN(H)NO)], the first primary N-nitrosamine coordinated to [IrIVCl5]- was isolated and characterised by UV-vis absorption, FTIR, NMR spectroscopy, ultra-high resolution electrospray mass spectrometry (UHR-ESI-MS) and iridium L3 X-ray absorption near-edge spectroscopy (XANES).Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicada

A low-cost fluorescence reader for in vitro transcription and nucleic acid detection with Cas13a

Point-of-care testing (POCT) in low-resource settings requires tools that can operate independently of typical laboratory infrastructure. Due to its favorable signal-to-background ratio, a wide variety of biomedical tests utilize fluorescence as a readout. However, fluorescence techniques often require expensive or complex instrumentation and can be difficult to adapt for POCT. To address this issue, we developed a pocket-sized fluorescence detector costing less than $15 that is easy to manufacture and can operate in low-resource settings. It is built from standard electronic components, including an LED and a light dependent resistor, filter foils and 3D printed parts, and reliably reaches a lower limit of detection (LOD) of. 6.8 nM fluorescein, which is sufficient to follow typical biochemical reactions used in POCT applications. All assays are conducted on filter paper, which allows for a flat detector architecture to improve signal collection. We validate the device by quantifying in vitro RNA transcription and also demonstrate sequence-specific detection of target RNAs with an LOD of 3.7 nM using a Cas13a-based fluorescence assay. Cas13a is an RNA-guided, RNA-targeting CRISPR effector with promiscuous RNase activity upon recognition of its RNA target. Cas13a sensing is highly specific and adaptable and in combination with our detector represents a promising approach for nucleic acid POCT. Furthermore, our open-source device may be used in educational settings, through providing low cost instrumentation for quantitative assays or as a platform to integrate hardware, software and biochemistry concepts in the future

Outbreak of cryptosporidium hominis following river flooding in the city of Halle (Saale), Germany, August 2013

Background: During weeks 32–33, 2013, 24 cases of cryptosporidiosis were notified in the city of Halle (annual mean 2008–2012: 9 cases). We investigated the outbreak to identify the source and recommend control measures, considering that between weeks 23–25 the river Saale which flows through the city centre overflowed the floodplain, parts of the city centre and damaged sewage systems. Methods: We defined a case as a resident of Halle with gastroenteritis, Cryptosporidium-positive stool and disease onset weeks 27 through 47. In a case–control study among kindergarten children, we compared cases and controls regarding environmental exposure, use of swimming pools, zoo visits and tap water consumption 14 days pre-onset or a corresponding 14-days-period (controls) and adjusted for residence. Stool specimens were tested by microscopy and PCR, and Cryptosporidium DNA was sequenced. Samples from public water system, swimming pools and river Saale were examined for Cryptosporidium oocysts (microscopy and PCR). Results: Overall, 167 cases were detected, 40/167 (24%) were classified as secondary cases. First disease onsets occurred during week 29, numbers peaked in week 34 and started to decrease in week 36. Median age was 8 years (range: 0–77). Compared to controls (n = 61), cases (n = 20) were more likely to report visits to previously flooded areas (OR: 4.9; 95%-CI: 1.4-18) and the zoo (OR: 2.6; 95%-CI: 0.9-7.6). In multivariable analysis visits to the floodplain remained the sole risk factor (OR: 5.5; 95%-CI: 1.4-22). Only C.hominis of a single genotype (IbA9G2) was detected in stools. Oocysts were detected in samples from the river, two local lakes and three public swimming pools by microscopy, but not in the public water supply. Conclusions: Evidence suggests that activities in the dried out floodplain led to infection among children. Secondary transmissions may be involved. Consequently, authorities recommended to avoid playing, swimming and having picnics in the flood-affected area. Health authorities should consider the potential health risks of long-term surviving parasites persisting on flooded grounds and in open waters even several weeks after the flooding and of bathing places close to sewage spill-overs. Preventive measures comprise water sampling (involving parasites), information of the public and prolonged closures of potentially contaminated sites

Stimulated resonant inelastic X-ray scattering in a solid

When materials are exposed to X-ray pulses with sufficiently high intensity, various nonlinear effects can occur. The most fundamental one consists of stimulated electronic decays after resonant absorption of X-rays. Such stimulated decays enhance the number of emitted photons and the emission direction is confined to that of the stimulating incident photons which clone themselves in the process. Here we report the observation of stimulated resonant elastic (REXS) and inelastic (RIXS) X-ray scattering near the cobalt L3 edge in solid Co/Pd multilayer samples. We observe an enhancement of order 106 of the stimulated over the conventional spontaneous RIXS signal into the small acceptance angle of the RIXS spectrometer. We also find that in solids both stimulated REXS and RIXS spectra contain contributions from inelastic electron scattering processes, even for ultrashort 5 fs pulses. Our results reveal the potential and caveats of the development of stimulated RIXS in condensed matter

Human Practice. Digital Ecologies. Our Future. : 14. Internationale Tagung Wirtschaftsinformatik (WI 2019) : Tagungsband

Erschienen bei: universi - Universitätsverlag Siegen. - ISBN: 978-3-96182-063-4Aus dem Inhalt: Track 1: Produktion & Cyber-Physische Systeme Requirements and a Meta Model for Exchanging Additive Manufacturing Capacities Service Systems, Smart Service Systems and Cyber- Physical Systems—What’s the difference? Towards a Unified Terminology Developing an Industrial IoT Platform – Trade-off between Horizontal and Vertical Approaches Machine Learning und Complex Event Processing: Effiziente Echtzeitauswertung am Beispiel Smart Factory Sensor retrofit for a coffee machine as condition monitoring and predictive maintenance use case Stakeholder-Analyse zum Einsatz IIoT-basierter Frischeinformationen in der Lebensmittelindustrie Towards a Framework for Predictive Maintenance Strategies in Mechanical Engineering - A Method-Oriented Literature Analysis Development of a matching platform for the requirement-oriented selection of cyber physical systems for SMEs Track 2: Logistic Analytics An Empirical Study of Customers’ Behavioral Intention to Use Ridepooling Services – An Extension of the Technology Acceptance Model Modeling Delay Propagation and Transmission in Railway Networks What is the impact of company specific adjustments on the acceptance and diffusion of logistic standards? Robust Route Planning in Intermodal Urban Traffic Track 3: Unternehmensmodellierung & Informationssystemgestaltung (Enterprise Modelling & Information Systems Design) Work System Modeling Method with Different Levels of Specificity and Rigor for Different Stakeholder Purposes Resolving Inconsistencies in Declarative Process Models based on Culpability Measurement Strategic Analysis in the Realm of Enterprise Modeling – On the Example of Blockchain-Based Initiatives for the Electricity Sector Zwischenbetriebliche Integration in der Möbelbranche: Konfigurationen und Einflussfaktoren Novices’ Quality Perceptions and the Acceptance of Process Modeling Grammars Entwicklung einer Definition für Social Business Objects (SBO) zur Modellierung von Unternehmensinformationen Designing a Reference Model for Digital Product Configurators Terminology for Evolving Design Artifacts Business Role-Object Specification: A Language for Behavior-aware Structural Modeling of Business Objects Generating Smart Glasses-based Information Systems with BPMN4SGA: A BPMN Extension for Smart Glasses Applications Using Blockchain in Peer-to-Peer Carsharing to Build Trust in the Sharing Economy Testing in Big Data: An Architecture Pattern for a Development Environment for Innovative, Integrated and Robust Applications Track 4: Lern- und Wissensmanagement (e-Learning and Knowledge Management) eGovernment Competences revisited – A Literature Review on necessary Competences in a Digitalized Public Sector Say Hello to Your New Automated Tutor – A Structured Literature Review on Pedagogical Conversational Agents Teaching the Digital Transformation of Business Processes: Design of a Simulation Game for Information Systems Education Conceptualizing Immersion for Individual Learning in Virtual Reality Designing a Flipped Classroom Course – a Process Model The Influence of Risk-Taking on Knowledge Exchange and Combination Gamified Feedback durch Avatare im Mobile Learning Alexa, Can You Help Me Solve That Problem? - Understanding the Value of Smart Personal Assistants as Tutors for Complex Problem Tasks Track 5: Data Science & Business Analytics Matching with Bundle Preferences: Tradeoff between Fairness and Truthfulness Applied image recognition: guidelines for using deep learning models in practice Yield Prognosis for the Agrarian Management of Vineyards using Deep Learning for Object Counting Reading Between the Lines of Qualitative Data – How to Detect Hidden Structure Based on Codes Online Auctions with Dual-Threshold Algorithms: An Experimental Study and Practical Evaluation Design Features of Non-Financial Reward Programs for Online Reviews: Evaluation based on Google Maps Data Topic Embeddings – A New Approach to Classify Very Short Documents Based on Predefined Topics Leveraging Unstructured Image Data for Product Quality Improvement Decision Support for Real Estate Investors: Improving Real Estate Valuation with 3D City Models and Points of Interest Knowledge Discovery from CVs: A Topic Modeling Procedure Online Product Descriptions – Boost for your Sales? Entscheidungsunterstützung durch historienbasierte Dienstreihenfolgeplanung mit Pattern A Semi-Automated Approach for Generating Online Review Templates Machine Learning goes Measure Management: Leveraging Anomaly Detection and Parts Search to Improve Product-Cost Optimization Bedeutung von Predictive Analytics für den theoretischen Erkenntnisgewinn in der IS-Forschung Track 6: Digitale Transformation und Dienstleistungen Heuristic Theorizing in Software Development: Deriving Design Principles for Smart Glasses-based Systems Mirroring E-service for Brick and Mortar Retail: An Assessment and Survey Taxonomy of Digital Platforms: A Platform Architecture Perspective Value of Star Players in the Digital Age Local Shopping Platforms – Harnessing Locational Advantages for the Digital Transformation of Local Retail Outlets: A Content Analysis A Socio-Technical Approach to Manage Analytics-as-a-Service – Results of an Action Design Research Project Characterizing Approaches to Digital Transformation: Development of a Taxonomy of Digital Units Expectations vs. Reality – Benefits of Smart Services in the Field of Tension between Industry and Science Innovation Networks and Digital Innovation: How Organizations Use Innovation Networks in a Digitized Environment Characterising Social Reading Platforms— A Taxonomy-Based Approach to Structure the Field Less Complex than Expected – What Really Drives IT Consulting Value Modularity Canvas – A Framework for Visualizing Potentials of Service Modularity Towards a Conceptualization of Capabilities for Innovating Business Models in the Industrial Internet of Things A Taxonomy of Barriers to Digital Transformation Ambidexterity in Service Innovation Research: A Systematic Literature Review Design and success factors of an online solution for cross-pillar pension information Track 7: IT-Management und -Strategie A Frugal Support Structure for New Software Implementations in SMEs How to Structure a Company-wide Adoption of Big Data Analytics The Changing Roles of Innovation Actors and Organizational Antecedents in the Digital Age Bewertung des Kundennutzens von Chatbots für den Einsatz im Servicedesk Understanding the Benefits of Agile Software Development in Regulated Environments Are Employees Following the Rules? On the Effectiveness of IT Consumerization Policies Agile and Attached: The Impact of Agile Practices on Agile Team Members’ Affective Organisational Commitment The Complexity Trap – Limits of IT Flexibility for Supporting Organizational Agility in Decentralized Organizations Platform Openness: A Systematic Literature Review and Avenues for Future Research Competence, Fashion and the Case of Blockchain The Digital Platform Otto.de: A Case Study of Growth, Complexity, and Generativity Track 8: eHealth & alternde Gesellschaft Security and Privacy of Personal Health Records in Cloud Computing Environments – An Experimental Exploration of the Impact of Storage Solutions and Data Breaches Patientenintegration durch Pfadsysteme Digitalisierung in der Stressprävention – eine qualitative Interviewstudie zu Nutzenpotenzialen User Dynamics in Mental Health Forums – A Sentiment Analysis Perspective Intent and the Use of Wearables in the Workplace – A Model Development Understanding Patient Pathways in the Context of Integrated Health Care Services - Implications from a Scoping Review Understanding the Habitual Use of Wearable Activity Trackers On the Fit in Fitness Apps: Studying the Interaction of Motivational Affordances and Users’ Goal Orientations in Affecting the Benefits Gained Gamification in Health Behavior Change Support Systems - A Synthesis of Unintended Side Effects Investigating the Influence of Information Incongruity on Trust-Relations within Trilateral Healthcare Settings Track 9: Krisen- und Kontinuitätsmanagement Potentiale von IKT beim Ausfall kritischer Infrastrukturen: Erwartungen, Informationsgewinnung und Mediennutzung der Zivilbevölkerung in Deutschland Fake News Perception in Germany: A Representative Study of People’s Attitudes and Approaches to Counteract Disinformation Analyzing the Potential of Graphical Building Information for Fire Emergency Responses: Findings from a Controlled Experiment Track 10: Human-Computer Interaction Towards a Taxonomy of Platforms for Conversational Agent Design Measuring Service Encounter Satisfaction with Customer Service Chatbots using Sentiment Analysis Self-Tracking and Gamification: Analyzing the Interplay of Motivations, Usage and Motivation Fulfillment Erfolgsfaktoren von Augmented-Reality-Applikationen: Analyse von Nutzerrezensionen mit dem Review-Mining-Verfahren Designing Dynamic Decision Support for Electronic Requirements Negotiations Who is Stressed by Using ICTs? A Qualitative Comparison Analysis with the Big Five Personality Traits to Understand Technostress Walking the Middle Path: How Medium Trade-Off Exposure Leads to Higher Consumer Satisfaction in Recommender Agents Theory-Based Affordances of Utilitarian, Hedonic and Dual-Purposed Technologies: A Literature Review Eliciting Customer Preferences for Shopping Companion Apps: A Service Quality Approach The Role of Early User Participation in Discovering Software – A Case Study from the Context of Smart Glasses The Fluidity of the Self-Concept as a Framework to Explain the Motivation to Play Video Games Heart over Heels? An Empirical Analysis of the Relationship between Emotions and Review Helpfulness for Experience and Credence Goods Track 11: Information Security and Information Privacy Unfolding Concerns about Augmented Reality Technologies: A Qualitative Analysis of User Perceptions To (Psychologically) Own Data is to Protect Data: How Psychological Ownership Determines Protective Behavior in a Work and Private Context Understanding Data Protection Regulations from a Data Management Perspective: A Capability-Based Approach to EU-GDPR On the Difficulties of Incentivizing Online Privacy through Transparency: A Qualitative Survey of the German Health Insurance Market What is Your Selfie Worth? A Field Study on Individuals’ Valuation of Personal Data Justification of Mass Surveillance: A Quantitative Study An Exploratory Study of Risk Perception for Data Disclosure to a Network of Firms Track 12: Umweltinformatik und nachhaltiges Wirtschaften Kommunikationsfäden im Nadelöhr – Fachliche Prozessmodellierung der Nachhaltigkeitskommunikation am Kapitalmarkt Potentiale und Herausforderungen der Materialflusskostenrechnung Computing Incentives for User-Based Relocation in Carsharing Sustainability’s Coming Home: Preliminary Design Principles for the Sustainable Smart District Substitution of hazardous chemical substances using Deep Learning and t-SNE A Hierarchy of DSMLs in Support of Product Life-Cycle Assessment A Survey of Smart Energy Services for Private Households Door-to-Door Mobility Integrators as Keystone Organizations of Smart Ecosystems: Resources and Value Co-Creation – A Literature Review Ein Entscheidungsunterstützungssystem zur ökonomischen Bewertung von Mieterstrom auf Basis der Clusteranalyse Discovering Blockchain for Sustainable Product-Service Systems to enhance the Circular Economy Digitale Rückverfolgbarkeit von Lebensmitteln: Eine verbraucherinformatische Studie Umweltbewusstsein durch audiovisuelles Content Marketing? Eine experimentelle Untersuchung zur Konsumentenbewertung nachhaltiger Smartphones Towards Predictive Energy Management in Information Systems: A Research Proposal A Web Browser-Based Application for Processing and Analyzing Material Flow Models using the MFCA Methodology Track 13: Digital Work - Social, mobile, smart On Conversational Agents in Information Systems Research: Analyzing the Past to Guide Future Work The Potential of Augmented Reality for Improving Occupational First Aid Prevent a Vicious Circle! The Role of Organizational IT-Capability in Attracting IT-affine Applicants Good, Bad, or Both? Conceptualization and Measurement of Ambivalent User Attitudes Towards AI A Case Study on Cross-Hierarchical Communication in Digital Work Environments ‘Show Me Your People Skills’ - Employing CEO Branding for Corporate Reputation Management in Social Media A Multiorganisational Study of the Drivers and Barriers of Enterprise Collaboration Systems-Enabled Change The More the Merrier? The Effect of Size of Core Team Subgroups on Success of Open Source Projects The Impact of Anthropomorphic and Functional Chatbot Design Features in Enterprise Collaboration Systems on User Acceptance Digital Feedback for Digital Work? Affordances and Constraints of a Feedback App at InsurCorp The Effect of Marker-less Augmented Reality on Task and Learning Performance Antecedents for Cyberloafing – A Literature Review Internal Crowd Work as a Source of Empowerment - An Empirical Analysis of the Perception of Employees in a Crowdtesting Project Track 14: Geschäftsmodelle und digitales Unternehmertum Dividing the ICO Jungle: Extracting and Evaluating Design Archetypes Capturing Value from Data: Exploring Factors Influencing Revenue Model Design for Data-Driven Services Understanding the Role of Data for Innovating Business Models: A System Dynamics Perspective Business Model Innovation and Stakeholder: Exploring Mechanisms and Outcomes of Value Creation and Destruction Business Models for Internet of Things Platforms: Empirical Development of a Taxonomy and Archetypes Revitalizing established Industrial Companies: State of the Art and Success Principles of Digital Corporate Incubators When 1+1 is Greater than 2: Concurrence of Additional Digital and Established Business Models within Companies Special Track 1: Student Track Investigating Personalized Price Discrimination of Textile-, Electronics- and General Stores in German Online Retail From Facets to a Universal Definition – An Analysis of IoT Usage in Retail Is the Technostress Creators Inventory Still an Up-To-Date Measurement Instrument? Results of a Large-Scale Interview Study Application of Media Synchronicity Theory to Creative Tasks in Virtual Teams Using the Example of Design Thinking TrustyTweet: An Indicator-based Browser-Plugin to Assist Users in Dealing with Fake News on Twitter Application of Process Mining Techniques to Support Maintenance-Related Objectives How Voice Can Change Customer Satisfaction: A Comparative Analysis between E-Commerce and Voice Commerce Business Process Compliance and Blockchain: How Does the Ethereum Blockchain Address Challenges of Business Process Compliance? Improving Business Model Configuration through a Question-based Approach The Influence of Situational Factors and Gamification on Intrinsic Motivation and Learning Evaluation von ITSM-Tools für Integration und Management von Cloud-Diensten am Beispiel von ServiceNow How Software Promotes the Integration of Sustainability in Business Process Management Criteria Catalog for Industrial IoT Platforms from the Perspective of the Machine Tool Industry Special Track 3: Demos & Prototyping Privacy-friendly User Location Tracking with Smart Devices: The BeaT Prototype Application-oriented robotics in nursing homes Augmented Reality for Set-up Processe Mixed Reality for supporting Remote-Meetings Gamification zur Motivationssteigerung von Werkern bei der Betriebsdatenerfassung Automatically Extracting and Analyzing Customer Needs from Twitter: A “Needmining” Prototype GaNEsHA: Opportunities for Sustainable Transportation in Smart Cities TUCANA: A platform for using local processing power of edge devices for building data-driven services Demonstrator zur Beschreibung und Visualisierung einer kritischen Infrastruktur Entwicklung einer alltagsnahen persuasiven App zur Bewegungsmotivation für ältere Nutzerinnen und Nutzer A browser-based modeling tool for studying the learning of conceptual modeling based on a multi-modal data collection approach Exergames & Dementia: An interactive System for People with Dementia and their Care-Network Workshops Workshop Ethics and Morality in Business Informatics (Workshop Ethik und Moral in der Wirtschaftsinformatik – EMoWI’19) Model-Based Compliance in Information Systems - Foundations, Case Description and Data Set of the MobIS-Challenge for Students and Doctoral Candidates Report of the Workshop on Concepts and Methods of Identifying Digital Potentials in Information Management Control of Systemic Risks in Global Networks - A Grand Challenge to Information Systems Research Die Mitarbeiter von morgen - Kompetenzen künftiger Mitarbeiter im Bereich Business Analytics Digitaler Konsum: Herausforderungen und Chancen der Verbraucherinformati

Applying Mixed Reality to Support Motor Learning

In diesem Beitrag stellen wir vier Einsatzmöglichkeiten von Mixed Reality (MR) zur Unterstützung von motorischem Lernen vor. Wir haben Kinaesthetics-Kurse im Kontext Pflege hospitiert und Interviews mit Kinaesthetics-DozentInnen und -Auszubildenden durchgeführt. Die erhobenen Daten wurden mit Fokus auf den Ablauf des Lernprozesses und bestehende Probleme analysiert. Auf Basis der kontextuellen Analyse wurden Anforderungen an technische Systeme, welche motorisches Lernen unterstützen sollen, identifiziert. In Bezug zu den erarbeiteten Anforderungen und bestehender Literatur werden von uns vier Möglichkeiten vorgestellt, um MR für die Unterstützung von motorischem Lernen einzusetzen.publishe

InformationSense : Trade-offs for the Design and the Implementation of a Large Highly Deformable Cloth Display

Deformable displays can provide two major benefits compared to rigid displays: Objects of different shapes and deformabilities, situated in our physical environment, can be equipped with deformable displays, and users can benefit from their pre-existing knowledge about the interaction with physical objects when interacting with deformable displays. In this article we present InformationSense, a large, highly deformable cloth display. The article contributes to two research areas in the context of deformable displays: It presents an approach for the tracking of large, highly deformable surfaces, and it presents one of the first UX analyses of cloth displays that will help with the design of future interaction techniques for this kind of display. The comparison of InformationSense with a rigid display interface unveiled the trade-off that while users are able to interact with InformationSense more naturally and significantly preferred InformationSense in terms of joy of use, they preferred the rigid display interfaces in terms of efficiency. This suggests that deformable displays are already suitable if high hedonic qualities are important but need to be enhanced with additional digital power if high pragmatic qualities are required.publishe

HCI meets Nursing Care : The application of Mixed Reality in basic Nursing Care Education

The traditional education of basic activities in nursing care (e.g. patient mobilization or hygiene) poses different limitations like, e.g. restricted options for self-education or limited realism in the learning context. By blending the real-world with virtual content, Mixed Reality (MR) technology holds great potential to address given shortcomings in interactive learning scenarios. In this work we explore how Human-Computer Interaction (HCI) can inform the development of MR systems for basic nursing care education. We conducted a review of the current employment of MR and Virtual Reality (VR) displays (including desktop-based ones) in basic nursing care education and discuss our results in respect to the conceptual HCI framework Blended Interaction. In contrast to existing reviews, our work differs by placing a clear focus on activities of basic nursing care education and the question how HCI can inspire the design of MR applications which support such activities. We first conducted a search of the Web of Science Core Collection based on predefined search terms. 139 publications were found. We filtered them by inclusion criteria to ensure that only papers which use MR or VR displays to support basic nursing care education remained. The remaining publications were viewed with respect to the four domains of design provided by the Blended Interaction framework, namely (1) individual interaction, (2) social interaction and communication, (3) workflow and (4) physical environment. Our results indicate that MR in basic nursing care education just barely scratches the surface. The majority of systems employs desktop-based VR. Most systems facilitate individual interactions by mouse, keyboard or specific haptic devices, support limited or no social interactions, provide structured workflows or free interactions, and employ 2-dimensional VR displays to simulate work environments. Future MR systems could allow for more realistic interactions, stimulate collaboration through 3-dimensional real-world overlays, enhance learning workflows by rendering or deliberately hiding information within real-world scenarios, and facilitate immersive environments with physically enabled virtual objects. In conclusion, we show that the present use of MR in basic nursing care education is limited and introduce directions for design which can help leveraging the technologies’ full potential in the future.publishe

ViTT: Towards a Virtual Reality System that Supports the Learning of Ergonomic Patient Transfers

While patient transfers are part of nurses’ daily work, the manual transfer of patients can also pose a major risk to nurses’ health. The Kinaesthetics care conception may help nurses to conduct patient transfers more ergonomically. However, existing support to learn the concept is low. We introduce ViTT, a Virtual Reality system to promote the individual, self-directed learning of ergonomic patient transfers based on the Kinaesthetics care conception. The current implementation of ViTT supports a nurse in two phases: (i) instructions for a patient transfer, and (ii) training of the transfer with a virtual patient (based on a physics engine; implementation limited). In contrast to previous work, our approach provides an immersive experience that may allow for the ‘safe’ training of different transfer scenarios—e.g., patients with different impairments—and the study of different parameters that may influence nurses’ learning experience—e.g., the simulation of stress—in the future.publishe

Carbon-rich cyclopentadienyl ruthenium allenylidene complexes

Ruthenium allenylidene complexes with carbon-rich polyaromatic moieties have been synthesized by using [RuCl(η5-C5H5)(PPh3)2] (η5-C5H5 = cyclopentadienyl) as a precursor and the propargyl alcohols 10-ethynyl-10-hydroxyanthracen-9-one (ACO), 13-ethynyl-13-hydroxypentacen-6-one (PCO), 1-phenyl-1-(pyren-1-yl)prop-2-yn-1-ol (PyrPh), 9-ethynyl-9H-fluoren-9-ol (FN) and 6-ethynyl-6H-benzo[cd]pyren-6-ol (BPyr) as ligands. The resulting cationic allenylidene complexes, [Ru(η5-C5H5)([double bond, length as m-dash]C[double bond, length as m-dash]C[double bond, length as m-dash](AO))(PPh3)2]PF6 (1), [Ru(η5-C5H5)([double bond, length as m-dash]C[double bond, length as m-dash]C[double bond, length as m-dash](PCO))(PPh3)2]PF6 (2), [Ru(η5-C5H5)([double bond, length as m-dash]C[double bond, length as m-dash]C[double bond, length as m-dash](PyrPh))(PPh3)2]PF6 (3), [Ru(η5-C5H5)([double bond, length as m-dash]C[double bond, length as m-dash]C[double bond, length as m-dash](FN))(PPh3)2]PF6 (4), and [Ru(η5-C5H5)([double bond, length as m-dash]C[double bond, length as m-dash]C[double bond, length as m-dash](BPyr))(PPh3)2]PF6 (5) show interesting intermolecular π-interactions in the solid-state structure as well as solution state complexation with pyrene (documented by Job's plots experiments). CV data indicate possible Ru(II)/Ru(III) oxidation, as well as the potential reduction of the carbon-rich allenylidene moiety