167 research outputs found
Capillary pressure of van der Waals liquid nanodrops
The dependence of the surface tension on a nanodrop radius is important for
the new-phase formation process. It is demonstrated that the famous Tolman
formula is not unique and the size-dependence of the surface tension can
distinct for different systems. The analysis is based on a relationship between
the surface tension and disjoining pressure in nanodrops. It is shown that the
van der Waals interactions do not affect the new-phase formation thermodynamics
since the effect of the disjoining pressure and size-dependent component of the
surface tension cancel each other.Comment: The paper is dedicated to the 80th anniversary of A.I. Rusano
Green strategies for the sustainable growth of food security
Modern society today is reconsidering its development strategy in the light of changing environmental conditions. The global climatic changes observed over the last 30-40 years require not just a careful attitude toward nature and resources, but a comprehensive review of the technologies of production and processing of raw materials and resources. The consumer strategy that has dominated society for the past 2-3 centuries must be completely transformed into a new philosophy of sustainable development of economic systems and growth of food supply for the growing world population. Deteriorating production conditions and resource depletion will not allow a growing humanity to develop at the same speed without a sustainable food base. Therefore, the task of increasing food security becomes a priority in the strategy for the development of the national economy. © The Authors, published by EDP Sciences, 2023
Low Friction Flows of Liquids at Nanopatterned Interfaces
With the recent important development of microfluidic systems,
miniaturization of flow devices has become a real challenge. Microchannels,
however, are characterized by a large surface to volume ratio, so that surface
properties strongly affect flow resistance in submicrometric devices. We
present here results showing that the concerted effect of wetting . properties
and surface roughness may considerably reduce friction of the fluid past the
boundaries. The slippage of the fluid at the channel boundaries is shown to be
drastically increased by using surfaces that are patterned at the nanometer
scale. This effect occurs in the regime where the surface pattern is partially
dewetted, in the spirit of the 'superhydrophobic' effects that have been
recently discovered at the macroscopic scales. Our results show for the first
time that, in contrast to the common belief, surface friction may be reduced by
surface roughness. They also open the possibility of a controlled realization
of the 'nanobubbles' that have long been suspected to play a role in
interfacial slippag
Lattice Boltzmann simulations in microfluidics: probing the no-slip boundary condition in hydrophobic, rough, and surface nanobubble laden microchannels
In this contribution we review recent efforts on investigations of the effect
of (apparent) boundary slip by utilizing lattice Boltzmann simulations. We
demonstrate the applicability of the method to treat fundamental questions in
microfluidics by investigating fluid flow in hydrophobic and rough
microchannels as well as over surfaces covered by nano- or microscale gas
bubbles.Comment: 11 pages, 6 figure
Hysteresis of Contact Angle of Sessile Droplets on Smooth Homogeneous Solid Substrates via Disjoining/Conjoining Pressure
This document is the Accepted Manuscript version of a Published Work that appeared in final form in Langmuir copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.langmuir.5b01075A theory of contact angle hysteresis of liquid droplets on smooth, homogeneous solid substrates is developed in terms of the shape of the disjoining/conjoining pressure isotherm and quasi-equilibrium phenomena. It is shown that all contact angles, θ, in the range θr < θ < θa, which are different from the unique equilibrium contact angle θ ≠ θe, correspond to the state of slow “microscopic” advancing or receding motion of the liquid if θe < θ < θa or θr < θ < θe, respectively. This “microscopic” motion almost abruptly becomes fast “macroscopic” advancing or receding motion after the contact angle reaches the critical values θa or θr, correspondingly. The values of the static receding, θr, and static advancing, θa, contact angles in cylindrical capillaries were calculated earlier, based on the shape of disjoining/conjoining pressure isotherm. It is shown now that (i) both advancing and receding contact angles of a droplet on a on smooth, homogeneous solid substrate can be calculated based on shape of disjoining/conjoining pressure isotherm, and (ii) both advancing and receding contact angles depend on the drop volume and are not unique characteristics of the liquid–solid system. The latter is different from advancing/receding contact angles in thin capillaries. It is shown also that the receding contact angle is much closer to the equilibrium contact angle than the advancing contact angle. The latter conclusion is unexpected and is in a contradiction with the commonly accepted view that the advancing contact angle can be taken as the first approximation for the equilibrium contact angle. The dependency of hysteresis contact angles on the drop volume has a direct experimental confirmation
Enhanced permeability due to apparent oil/brine slippage in limestone and its dependence on wettability
Acknowledgments This material includes work supported by a Society of Petrophysicists and Well Log Analysts Foundation grant and an Aberdeen Formation Evaluation Society scholarship. M.C. was supported by a University of Aberdeen College of Physical Sciences studentship. The authors gratefully acknowledge Amer Syed for his assistance with the assembly and maintenance of the coreflood rigs, Jim Anderson for helpful discussions, and the two anonymous reviewers for their comments and suggestions. All data used in this study will be made available from the corresponding author upon request.Peer reviewedPublisher PD
Polymer Flow Through Porous Media: Numerical Prediction of the Contribution of Slip to the Apparent Viscosity.
The flow of polymer solutions in porous media is often described using Darcy’s law with an apparent viscosity capturing the observed thinning or thickening effects. While the macroscale form is well accepted, the fundamentals of the pore-scale mechanisms, their link with the apparent viscosity, and their relative influence are still a matter of debate. Besides the complex effects associated with the rheology of the bulk fluid, the flow is also deeply influenced by the mechanisms occurring close to the solid/liquid interface, where polymer molecules can arrange and interact in a complex manner. In this paper, we focus on a repulsive mechanism, where polymer molecules are pushed away from the interface, yielding a so-called depletion layer in the vicinity of the wall. This depletion layer acts as a lubricating film that may be represented by an effective slip boundary condition. Here, our goal is to provide a simple mean to evaluate the contribution of this slip effect to the apparent viscosity. To do so, we solve the pore-scale flow numerically in idealized porous media with a slip length evaluated analytically in a tube. Besides its simplicity, the advantage of our approach is also that it captures relatively well the apparent viscosity obtained from core-flood experiments, using only a limited number of inputs. Therefore, it may be useful in many applications to rapidly estimate the influence of the depletion layer effect over the macroscale flow and its relative contribution compared to other phenomena, such as non-Newtonian effects
Role of Caustic Addition in Bitumen-Clay Interactions
Coating of bitumen by clays, known as slime coating, is detrimental to bitumen recovery from oil sands using the warm slurry extn. process. Sodium hydroxide (caustic) is added to the extn. process to balance many competing processing challenges, which include undesirable slime coating. The current research aims at understanding the role of caustic addn. in controlling interactions of bitumen with various types of model clays. The interaction potential was studied by quartz crystal microbalance with dissipation monitoring (QCM-D). After confirming the slime coating potential of montmorillonite clays on bitumen in the presence of calcium ions, the interaction of kaolinite and illite with bitumen was studied. To represent more closely the industrial applications, tailings water from bitumen extn. tests at different caustic dosage was used. At caustic dosage up to 0.5 wt % oil sands ore, a negligible coating of kaolinite on the bitumen was detd. However, at a lower level of caustic addn., illite was shown to attach to the bitumen, with the interaction potential decreasing with increasing caustic dosage. Increasing concn. of humic acids as a result of increasing caustic dosage was identified to limit the interaction potential of illite with bitumen. This fundamental study clearly shows that the crit. role of caustics in modulating interactions of clays with bitumen depends upon the type of clays. Thus, clay type was identified as a key operational variable
- …