On the changing seasonal cycles and trends of ozone at Mace Head, Ireland

A seasonal-trend decomposition technique based on a locally-weighted regression smoothing (Loess) approach has been used to decompose monthly ozone concentrations at Mace Head (Ireland) into trend, seasonal and irregular components. The trend component shows a steady increase from 1990–2004, which is confirmed by statistical testing which shows that ozone concentrations at Mace Head have increased at the p=0.06 level by 0.18±0.04 ppb yr^−1. By considering different air mass origins using a trajectory analysis, it has been possible to separate air masses into 'polluted' and 'unpolluted' origins. The seasonal-trend decomposition technique confirms the different seasonal cycles of these air mass origins with unpolluted air mass maxima in April and polluted air mass maxima in July/August. A detailed consideration of the seasonal component reveals different behaviour depending on the air mass origin. For baseline unpolluted air arriving at Mace Head there has been a gradual increase in the seasonal amplitude, driven by a declining summertime component. The amplitude of the seasonal component of baseline air is controlled by a maximum in April and a minimum in July. For polluted air mass trajectories, there was a substantial reduction in the amplitude of the seasonal component from 1990–1997. However, post-1997 results indicate that the seasonal amplitude in polluted air masses arriving at Mace Head is increasing. Furthermore, there has been a shift in the months controlling the size of the seasonal amplitude in polluted air from a maximum in May and minimum in January in 1990 to a maximum in April and a minimum in July by 2001. This finding suggests that there has been a steadily decreasing influence of polluted air masses arriving from Europe. These air masses have therefore increasingly taken on the attributes of baseline air

Modelling trends in OH radical concentrations using generalized additive models

During the TORCH campaign a zero dimensional box model based on the Master Chemical Mechanism was used to model concentrations of OH radicals. The model provided a close overall fit to measured concentrations but with some significant deviations. In this research, an approach was established for applying Generalized Additive Models (GAM) to atmospheric concentration data. Two GAM models were fitted to OH radical concentrations using TORCH data, the first using measured OH data and the second using MCM model results. GAM models with five smooth functions provided a close fit to the data with 78% of the deviance explained for measured OH and 83% for modelled OH. The GAM model for measured OH produced substantially better predictions of OH concentrations than the original MCM model results. The diurnal profile of OH concentration was reproduced and the predicted mean diurnal OH concentration was only 0.2% less than the measured concentration compared to 16.3% over-estimation by the MCM model. Photolysis reactions were identified as most important in explaining concentrations of OH. The GAM models combined both primary and secondary pollutants and also anthropogenic and biogenic species to explain changes in OH concentrations. Differences identified in the dependencies of modelled and measured OH concentrations, particularly for aromatic and biogenic species, may help to understand why the MCM model predictions sometimes disagree with measurements of atmospheric species

Quantum optomechanics of a multimode system coupled via photothermal and radiation pressure force

We provide a full quantum description of the optomechanical system formed by a Fabry-Perot cavity with a movable micro-mechanical mirror whose center-of-mass and internal elastic modes are coupled to the driven cavity mode by both radiation pressure and photothermal force. Adopting a quantum Langevin description, we investigate simultaneous cooling of the micromirror elastic and center-of-mass modes, and also the entanglement properties of the optomechanical multipartite system in its steady state.Comment: 11 pages, 7 figure

Comment on Photothermal radiometry parametric identifiability theory for reliable and unique nondestructive coating thickness and thermophysical measurements, J. Appl. Phys. 121(9), 095101 (2017)

A recent paper [X. Guo, A. Mandelis, J. Tolev and K. Tang, J. Appl. Phys., 121, 095101 (2017)] intends to demonstrate that from the photothermal radiometry signal obtained on a coated opaque sample in 1D transfer, one should be able to identify separately the following three parameters of the coating: thermal diffusivity, thermal conductivity and thickness. In this comment, it is shown that the three parameters are correlated in the considered experimental arrangement, the identifiability criterion is in error and the thickness inferred therefrom is not trustable.Comment: 3 page

Frequency Dependent Specific Heat from Thermal Effusion in Spherical Geometry

We present a novel method of measuring the frequency dependent specific heat at the glass transition applied to 5-polyphenyl-4-ether. The method employs thermal waves effusing radially out from the surface of a spherical thermistor that acts as both a heat generator and thermometer. It is a merit of the method compared to planar effusion methods that the influence of the mechanical boundary conditions are analytically known. This implies that it is the longitudinal rather than the isobaric specific heat that is measured. As another merit the thermal conductivity and specific heat can be found independently. The method has highest sensitivity at a frequency where the thermal diffusion length is comparable to the radius of the heat generator. This limits in practise the frequency range to 2-3 decades. An account of the 3omega-technique used including higher order terms in the temperature dependency of the thermistor and in the power generated is furthermore given.Comment: 17 pages, 15 figures, Substantially revised versio

Diffusion of a granular pulse in a rotating drum

The diffusion of a pulse of small grains in an horizontal rotating drum is studied through discrete elements methods simulations. We present a theoretical analysis of the diffusion process in a one-dimensional confined space in order to elucidate the effect of the confining end-plate of the drum. We then show that the diffusion is neither subdiffusive nor superdiffusive but normal. This is demonstrated by rescaling the concentration profiles obtained at various stages and by studying the time evolution of the mean squared deviation. Finally we study the self-diffusion of both large and small grains and we show that it is normal and that the diffusion coefficient is independent of the grain size

Aerosol climate feedback due to decadal increases in Southern Hemisphere wind speeds

Observations indicate that the westerly jet in the Southern Hemisphere troposphere is accelerating. Using a global aerosol model we estimate that the increase in wind speed of 0.45 + /- 0.2 m s(-1) decade(-1) at 50-65 degrees S since the early 1980s caused a higher sea spray flux, resulting in an increase of cloud condensation nucleus concentrations of more than 85% in some regions, and of 22% on average between 50 and 65 degrees S. These fractional increases are similar in magnitude to the decreases over many northern hemisphere land areas due to changes in air pollution over the same period. The change in cloud drop concentrations causes an increase in cloud reflectivity and a summertime radiative forcing between at 50 and 65 degrees S comparable in magnitude but acting against that from greenhouse gas forcing over the same time period, and thus represents a substantial negative climate feedback. However, recovery of Antarctic ozone depletion in the next two decades will likely cause a fall in wind speeds, a decrease in cloud drop concentration and a correspondingly weaker cloud feedback

Diffusion-controlled phase growth on dislocations

We treat the problem of diffusion of solute atoms around screw dislocations. In particular, we express and solve the diffusion equation, in radial symmetry, in an elastic field of a screw dislocation subject to the flux conservation boundary condition at the interface of a new phase. We consider an incoherent second-phase precipitate growing under the action of the stress field of a screw dislocation. The second-phase growth rate as a function of the supersaturation and a strain energy parameter is evaluated in spatial dimensions d=2 and d=3. Our calculations show that an increase in the amplitude of dislocation force, e.g. the magnitude of the Burgers vector, enhances the second-phase growth in an alloy. Moreover, a relationship linking the supersaturation to the precipitate size in the presence of the elastic field of dislocation is calculated.Comment: 10 pages, 4 figures, a revised version of the paper presented in MS&T'08, October 5-9, 2008, Pittsburg

Photothermal heterodyne imaging of individual nonfluorescent nanoclusters and nanocrystals

We introduce a new, highly sensitive, and simple heterodyne optical method for imaging individual nonfluorescent nanoclusters and nanocrystals. A 2 order of magnitude improvement of the signal is achieved compared to previous methods. This allows for the unprecedented detection of individual small absorptive objects such as metallic clusters (of 67 atoms) or nonluminescent semiconductor nanocrystals. The measured signals are in agreement with a calculation based on the scattering field theory from a photothermal-induced modulated index of refraction profile around the nanoparticle