Solución de Dos Estudios de Caso Bajo el Uso de Tecnología CISCO

https://drive.google.com/drive/folders/1wrvi2ICF8hKiDDySoWsrg3m2rqjAEebh?usp=sharingEn este proyecto se lleva a la practica el conocimiento adquirido en el diplomado de profundización cisco sobre diseño e implementación de soluciones integradas lan y wan, haciendo simulaciones en el programa de Cisco Packet Tracer sobre dos escenarios diferentes, donde se crean topologías físicas y se analizan diferentes redes configurando los dispositivos de red según los requerimientos de cada escenario. Se evidenciará la documentación de la solución, correspondientes al registro de la configuración de cada uno de los dispositivos, la descripción detallada del paso a paso de cada una de las etapas realizadas durante el desarrollo, el registro de los procesos de verificación de conectividad mediante el uso de comandos ping, traceroute, show ip route, entre otros.In this project, the knowledge acquired in the Cisco in-depth course on the design and implementation of integrated solutions lan and wan is put into practice, simulating the Cisco Packet Tracer program on two different scenarios, where physical topologies are created and analyzed different networks configuring the network devices according to the requirements of each scenario. The documentation of the solution, corresponding to the registration of the configuration of each of the devices, the detailed description of the step-by-step of each of the stages carried out during the development, the registration of the connectivity verification processes through the use of ping, traceroute, show ip route commands, among others

Influence of recycled aggregate quality from precast rejection on mechanical properties of self-compacting concrete

The use of coarse aggregates from crushing pre-existing concrete in the manufacturing of new concrete needs experimental results to validate its influence in the properties of the new concrete elements. In the present study we assessed the impact of using different proportions of replacement up to 100% of natural aggregates with recycled aggregates in the concrete properties; moreover, the effect of pre-treatments of pre-saturation, washing and the aggregates’ source (from precast concrete rejected pieces and construction and demolition waste) was analysed. The best results were obtained with dry and washed recycled aggregates, the compressive strength increment was between the 8 and 17% compared to conventional concrete. Results also pointed out that recycled aggregate that exclusively comes from precast concrete pieces lead to a better concrete mechanical characteristic than the aggregates which origin is construction and demolition waste. In addition, a clear relationship between the percentage of recycled aggregate substitution and the workability and mechanical performance of self-compacting concrete is observed. The results presented in this paper allow to state that precast concrete factories can recycle their rejected elements into recycled coarse aggregates for manufacturing new products, this will allow to protect the environment by reducing the need of raw material consumption and the C&DW landfill

Diseño y fabricación de módulo para estudio de análisis vibracional, alineamiento láser y balanceo dinámico para la empresa Mahe Peru

Mahe Perú EIRL se ocupa de la venta de equipos y servicios de mantenimiento predictivo. Hay una gran preocupación en los clientes, cuando los equipos se dañan por un mal manejo o cuando no se tienen resultados en el mantenimiento predictivo, por un uso incorrecto de los equipos. Ante esto se propuso en MAHE, el diseño e implementación de un módulo para estudio de análisis vibracional, alineamiento láser y balanceo dinámico orientado a mejorar el servicio de capacitaciones en cuanto al manejo de equipos de mantenimiento predictivo en un plazo breve y a un bajo costo, frente a los equipos convencionales importados. Se estudiaron los módulos de propósitos similares existentes en el mercado nacional, todos de manufactura extranjera, determinándose los puntos clave y características que justificaban su alto precio. Entonces se plantearon cambios en el material y en el diseño de la estructura sin perder la funcionabilidad, se prepararon los planos en SolidsWork; el módulo desarrollado fue probado y obtuvo las mismas prestaciones que los equipos importados. El proyecto se desarrolló e implementó en 10 días y se consiguió un costo tan bajo que actualmente es el módulo de más bajo precio en el mercado local. Por lo que MAHE ya distribuyo tres unidades entre sus clientes, aumentando la facturación mensual, luego de realizarse el modulo. El módulo no solo facilitó las capacitaciones en los equipos de alineamiento laser y balanceo dinámico dentro de las empresas, sino que también facilitó el entrenamiento en el uso correcto de estos equipos, y proporcionó un ambiente seguro para el estudio del análisis vibracional.MAHE Peru EIRL deals with the sale of predictive maintenance equipments and services. There is great concern among customers when equipment is damaged due to mishandling or when there are no results in predictive maintenance due to incorrect use of the equipment. Given this, MAHE proposed the design and implementation of a module for the study of vibrational analysis, laser alignment and dynamic balancing aimed at improving the training service regarding the operation of predictive maintenance equipment in a short time and at a low cost compared to conventional imported equipment. The modules of similar purposes existing in the national market, all of foreign manufacture, were studied, determining the key points and characteristics that justified their high price. Changes in the material and in the design of the structure were then proposed without losing functionality, the drawings were prepared in SolidsWork; the developed module was tested and obtained the same performance as the imported equipment. The project was developed and implemented in 10 days and the cost was so low that it is currently the lowest priced module in the local market, for which MAHE has already distributed three units among its clients, increasing the monthly billing, after the module was made. The module not only facilitated training in laser alignment and dynamic balancing equipment within companies, but also facilitated training in the correct use of this equipment and provided a safe environment for the study of vibrational analysis

Polyphenols in the Waste Water Produced during the Hydrodistillation of ‘Narcea Roses’ Cultivated in the Cibea River Valley (Northern Spain)

The ‘Narcea rose’ is a recently described yet ancient rose cultivar of interest to the perfume industry. Given its excellent adaptation to the conditions of the place where it was rediscovered, the possibilities of its horticultural/industrial production have been under examination for some time. The hydrodistillation process produces a red-to-brownish mixture of water and rose petals that could contain compounds that could be used in other industrial procedures. Their recovery and further utilization would reduce disposal costs and improve the sustainability of relevant industries. This work reports the quantification, by high-performance liquid chromatography (HPLC–MS) and quadrupole time of flight Q-TOF analyses, of the polyphenol content in the waste water. This waste was found to contain high concentrations of quercetin, gallic acid and ellagic acid, as well as smaller concentrations of kaempferol and its derivatives, all of which can influence plant, human and animal health.This research received no external funding

ENVIRONMENTAL IMPACT OF HEAVY-METAL DISPERSION IN THE HUERVA RIVER (IBERIAN RANGE, NE SPAIN)

In this study, the methodology of geochemical prospecting has been applied to the study of cadmium, lead, copper and zinc dispersion in the fine sediments of the upper course of the Huerva River (Iberian Range, NE Spain). The survey was organised in two stages: (1) general sampling along the river and its tributary channels, aimed at selecting the sections with the highest contents of the target elements, and (2) detailed study of those sections, aimed at an interpretation of possible positive geochemical anomalies and identification of their sources. The results of this study prove the existence of multiple and complex sources, with a significant influence of sources related to anthropogenic activity. However, the system shows a good ability to depurate itself under current conditions.Acero, P.; Mandado Collado, JMA.; Gómez, JB.; Gimeno, MJ.; Auqué, LF.; Torrijo, F. (2003). ENVIRONMENTAL IMPACT OF HEAVY-METAL DISPERSION IN THE HUERVA RIVER (IBERIAN RANGE, NE SPAIN). Environmental Geology. 43(8):950-956. doi:10.1007/s00254-002-0717-6S95095643

Annex to Deliverable Technical Report D1.2.2: FAQ - Frequently Asked Questions of WRF

This Annex report documents the first workshop series on the Weather Research Forecasting model (WRF) held by experts of the Cooling Singapore 1.5 project. The objective of the workshop series was to address technical questions for the next thematic areas: 1. General aspects of WRF, 2. Approach to Anthropogenic Heat modelling in WRF, and 3. Approach to Local Climate Zones modelling in WRF. The Workshop consisted of rounds of Q&A made by each expert. The answer to each question was discussed for 5 – 15 mins and the conclusions were documented. The expected outcome of the workshop is one technical report summarizing the Q&A in a format similar to that of ‘Frequently Asked Questions’. We expect this material to facilitate a common understanding about the integration of WRF in the Cooling Singapore Project

PIPES : Plan Integral de Prevención Escolar

Este libro es la presentación de un programa de la FAD: el PIPES o Plan Integral de Prevención Escolar. Se trata de un plan general de intervención educativo-escolar para la prevención del consumo de drogas que intenta, a través de la implicación y el compromiso de la comunidad escolar, poner en marcha programas preventivos dirigidos a los alumn@s, con la finalidad de que consigan estilos de vida más saludables y sean capaces de manejar mejor las presiones hacia los consumos. Es un programa integral, abierto y flexible que expone numerosas estrategias debido al amplio abanico de destinatarios: toda la comunidad escolar.MadridBiblioteca de Educación del Ministerio de Educación, Cultura y Deporte; Calle San Agustín 5 -3 Planta; 28014 Madrid; Tel. +34917748000; [email protected]

Metodología de la Investigación Científica - ME209 - 202101

1Metodología de la Investigación es un curso específico de la Carrera de Medicina, de carácter teórico-práctico, dirigido a los estudiantes del 7mo ciclo. Se busca que los estudiantes adquieran las competencias generales de razonamiento cuantitativo, manejo de la información y pensamiento innovador, a nivel intermedio; asimismo, se busca adquirir la competencia específica de investigación, a nivel básico. El presente curso inicia al estudiante de Medicina en el proceso de la investigación científica. De manera muy amigable, busca despertar en el alumno su espíritu investigador y su afán por comunicar sus hallazgos. Además, brinda las herramientas estadísticas necesarias para la elaboración de proyectos de investigación, así como el análisis e interpretación de artículos publicados en la literatura científica. El curso es parte de la línea de cursos de investigación para que el alumno tenga la experiencia de realizar una investigación, desde la idea del estudio hasta la redacción del informe final

Project Management Resources

Resources to help with managing project progress and ethical team scienc