Composite 2HDM with singlets: a viable dark matter scenario

We study the non-minimal composite Higgs model with global symmetry SO(7) broken to SO(5) x SO(2). The model results in a composite Two-Higgs doublet model (2HDM) equipped with two extra singlets, the lightest of which can be a viable dark matter candidate. The model is able to reproduce the correct dark matter relic density both via the usual thermal freeze-out and through late time decay of the heavier singlet. In the case of thermal freeze-out, it is possible to evade current experimental constraints even with the minimum fine tuning allowed by electroweak precision tests

Maintenance in aeronautics in an Industry 4.0 context: The role of Augmented Reality and Additive Manufacturing

The paper broadly addresses how Industry 4.0 program drivers will impact maintenance in aviation. Specifically, Industry 4.0 practices most suitable to aeronautical maintenance are selected, and a detailed exposure is provided. Advantages and open issues are widely discussed and case studies dealing with realistic scenarios are illustrated to support what has been proposed by authors. The attention has been oriented towards Augmented Reality and Additive Manufacturing technologies, which can support maintenance tasks and spare parts production, respectively. The intention is to demonstrate that Augmented Reality and Additive Manufacturing are viable tools in aviation maintenance, and while a strong effort is necessary to develop an appropriate regulatory framework, mandatory before the wide-spread introduction of these technologies in the aerospace systems maintenance process, there has been a great interest and pull from the industry sector

Comparison of Adaptive Control Architectures for Flutter Suppression

A study is conducted to derive and implement a state feedback model reference adaptive control (MRAC) solutions for a 2-D aeroelastic nonlinear system and in evaluating the robustness of different control strategies to damage leading to the deterioration of the structural stiffness characteristics. The standard MRAC, a modified MRAC and the adaptive controller are the three model reference adaptive control solutions analyzed. The standard direct MRAC solution serves as the threshold to assess whether or not the more complex algorithms are an effective improvement to it

Characterization of free volume during vulcanization of styrene butadiene rubber by means of positron annihilation lifetime spectroscopy and dynamic mechanical test

An experimental investigation was performed to study the effect on the free volume of the advance of the cross-linking reaction in a copolymer of styrene butadiene rubber by sulfur vulcanization. The dynamic modulus and loss tangent were evaluated over samples cured for different times at 433 K by dynamic mechanical tests over a range of frequencies between 5 and 80 Hz at temperatures between 200 and 300 K. Using the William-Landel-Ferry relationship, master curves were obtained at a reference temperature of 298 K and the coefficients [formula presented] and [formula presented] were evaluated. From these parameters the dependence of the free volume on the cure time is obtained. Positron annihilation lifetime spectroscopy was also used to estimate the size and number density of free volume sites in the material. The spectra were analyzed in terms of continuous distributions of free volume size. The results suggest an increase of the lower free volume size when cross linking takes place. Both techniques give similar results for the dependence of free volume on the time of cure of the polymer. © 2002 The American Physical Society.Fil:Marzocca, A.J. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales; Argentina.Fil:Cerveny, S. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales; Argentina

Indoor/Outdoor Air Quality Assessment at School near the Steel Plant in Taranto (Italy)

This study aims to investigate the air quality in primary school placed in district of Taranto (south of Italy), an area of high environmental risk because of closeness between large industrial complex and urban settlement. The chemical characterization of PM2.5 was performed to identify origin of pollutants detected inside school and the comparison between indoor and outdoor levels of PAHs and metals allowed evaluating intrusion of outdoor pollutants or the existence of specific indoor sources. The results showed that the indoor and outdoor levels of PM2.5, BaP, Cd, Ni, As, and Pb never exceeded the target values issued by World Health Organization (WHO). Nevertheless, high metals and PAHs concentrations were detected especially when school were downwind to the steel plant. TheI/Oratio showed the impact of outdoor pollutants, especially of industrial markers as Fe, Mn, Zn, and Pb, on indoor air quality. This result was confirmed by values of diagnostic ratio as B(a)P/B(g)P, IP/(IP + BgP), BaP/Chry, and BaP/(BaP + Chry), which showed range characteristics of coke and coal combustion. However, Ni and As showedI/Oratio of 2.5 and 1.4, respectively, suggesting the presence of indoor sources

Stable lepton mass matrices

Abstract: We study natural lepton mass matrices, obtained assuming the stability of physical flavour observables with respect to the variations of individual matrix elements. We identify all four possible stable neutrino textures from algebraic conditions on their entries. Two of them turn out to be uniquely associated to specific neutrino mass patterns. We then concentrate on the semi-degenerate pattern, corresponding to an overall neutrino mass scale within the reach of future experiments. In this context we show that i) the neutrino and charged lepton mixings and mass matrices are largely constrained by the requirement of stability, ii) naturalness considerations give a mild preference for the Majorana phase most relevant for neutrinoless double-\u3b2 decay, \u3b1 3c \u3c0/2, and iii) SU(5) unification allows to extend the implications of stability to the down quark sector. The above considerations would benefit from an experimental determination of the PMNS ratio 1aU32/U31 1a, i.e. of the Dirac phase \u3b4. \ua9 2016, The Author(s)

Measurements and tests on FBK silicon sensors with an optimized electronic design for a CTA camera

In October 2013, the Italian Ministry approved the funding of a Research & Development (R&D) study, within the "Progetto Premiale TElescopi CHErenkov made in Italy (TECHE)", devoted to the development of a demonstrator for a camera for the Cherenkov Telescope Array (CTA) consortium. The demonstrator consists of a sensor plane based on the Silicon Photomultiplier (SiPM) technology and on an electronics designed for signal sampling. Preliminary tests on a matrix of sensors produced by the Fondazione Bruno Kessler (FBK-Trento, Italy) and on electronic prototypes produced by SITAEL S.p.A. will be presented. In particular, we used different designs of the electronics in order to optimize the output signals in terms of tail cancellation. This is crucial for applications where a high background is expected, as for the CTA experiment.Comment: 5 pages, 6 figures; Proceedings of the 10th Workshop on Science with the New Generation of High-Energy Gamma-ray experiments (SciNeGHE) - PoS(Scineghe2014)00

Stable fermion mass matrices and the charged lepton contribution to neutrino mixing

We study the general properties of hierarchical fermion mass matrices in which the small eigenvalues are stable with respect to perturbations of the matrix entries and we consider specific applications to the charged lepton contribution to neutrino mixing. In particular, we show that the latter can account for the whole lepton mixing. In this case a value of sin \u3b813 73 me/m\u3bcsin \u3b823 48 0.03, as observed, can be obtained without the need of any fine-tuning, and present data allow to determine the last row of the charged lepton mass matrix with good accuracy. We also consider the case in which the neutrino sector only provides a maximal 12 rotation and show that i) present data provide a 2\u3c3 evidence for a non-vanishing 31 entry of the charged lepton mass matrix and ii) a plausible texture for the latter can account at the same time for the atmospheric mixing angle, the \u3b813angle, and the deviation of the \u3b812angle from \u3c0/2 without fine-tuning or tension with data. Finally, we show that the so-called \u201cinverted order\u201d of the 12 and 23 rotations in the charged lepton sector can be obtained without fine-tuning, up to corrections of order me/m\u3bc. \ua9 2014, The Author(s)

UFT/leucovorin and oxaliplatin alternated with UFT/leucovorin and irinotecan in metastatic colorectal cancer

A total of 41 metastatic colorectal cancer (CRC) patients received tegafur/uracil (UFT)+leucovorin (LV)+oxaliplatin alternated with UFT/LV+irinotecan. The overall response rate was 58.5% (95% confidence interval, 42.2-73.3%), and the median progression-free survival was 8.8 months. There were no grade 4 toxicities; 12 patients (29%) experienced grade 3 diarrhoea. There were no cases of hand-foot syndrome. This alternating regimen seems to be effective and well tolerated in the first-line treatment of patients with metastatic CRC