417 research outputs found

    Life cycle inventory for the production of zeolite a for detergents

    Get PDF
    Zeolite A is a crystalline aluminosilicare which has been used as a builder component in laundry detergents for many years. An LCI for the production of Zeolite A ("cradle-to-factory-gate”) was carried out on behalf of the European Zeolite producers. Data from five European production sites were collected to generate an average LCI for Zeolite A. The plants covered more than 77% of the total European production in 1993 an therefore represent an average situation. The original LCI tables show detailed figures about raw material, intermediates and auxiliary material consumption. The overall energy flow for the production of I t of anhydrous Zeolite is 22400 MJ with a minimal spread of ± 5% over the individual companies. Furthermore 25 air emission parameters and 35 water emission parameters are listed and categorised with respect to their origins e.g. process dependent, transportation, thermal energy and electricity production. Each company is able to compare their individual data with the average LCI to identify any opportunities to improve production processes. In addition, this LCI of Zeolite A provides the basis for any further LCA studies of a product containing Zeolite A, including comparisons and assessment

    Reporter constructs with low background activity utilizing the cat gene

    Get PDF
    Reporter plasmids utilizing the cat gene for the analysis of promoter and enhancer sequences in vertebrate cells, were constructed. These plasmids minimize the background of transcription derived from cryptic promoters or cryptic regulatory elements within the vecto

    CHST11 (carbohydrate (chondroitin 4) sulfotransferase 11)

    Get PDF
    Review on CHST11, with data on DNA/RNA, on the protein encoded and where the gene is implicated

    A fractal approach to structure analysis and micro-mechanical modeling of elastomer materials

    Get PDF
    [no abstract

    O sol e o vento no traçado urbano do Brasil Colonial

    Get PDF
    Analisando a implantação e o traçado original das primeiras cidades brasileiras, esse artigo constata que a disposição das ruas, a partir da costa marítima, adapta-se organicamente à morfologia dos terrenos, sem preocupações do ponto de vista climático, embora fossem os portugueses grandes navegadores e conhecedores dos princípios de orientação do sol e do regime de ventos. O presente estudo faz uma analise comparativa entre duas cidades coloniais brasileiras, Salvador, sua primeira capital, e São Luis, a primeira cidade planificada segundo a Lei das Índias, avaliando-se as relações entre o traçado urbano, sua orientação, dimensionamento, disposição dos lotes e dos edifícios, com o clima quente e úmido, considerados os fatores principais de ventilação e insolação. Verificando a implantação de outros núcleos urbanos, conclui-se que, possivelmente, a experiência acumulada, tenham definido o melhor sentido para orientação dos traçados na construção das cidades no Brasil diferentemente das recomendações determinadas para a América Espanhola

    Hauptschülerinnen und Hauptschüler auf dem Weg zur Berufsfindung : zur Rolle des Wochentagspraktikums im berufsvorbereitenden Unterricht der Hauptschule in Baden-Württemberg

    Get PDF
    Mit der vorliegenden Arbeit soll der Modellversuch des Wochentagspraktikums näher beleuchtet werden, um durch die gewonnenen Erkenntnisse der betreffenden Schule die Möglichkeit zu geben, diese Maßnahme von einer zusätzlichen Perspektive aus kritisch zu reflektieren und gegebenenfalls zu modifizieren. Ich habe eine Hauptschule im Schulamtsbezirk Sindelfingen ausgewählt, die das Wochentagspraktikum erstmalig im Schuljahr 1999/2000 durchgeführt hat. Es ist dort als Ergänzung zu dem in Klasse 8 üblichen zweiwöchigen Betriebspraktikum konzipiert und sieht vor, dass die Schülerinnen und Schüler der achten Klassen im zweiten Schulhalbjahr an einem Tag in der Woche einen von ihnen ausgewählten Praktikumsbetrieb besuchen. Insgesamt haben die Jugendlichen so die Gelegenheit, viereinhalb Monate im selben Praktikumsbetrieb mitzuarbeiten und Erfahrungen zu sammeln

    Modeling the Full Time-Dependent Phenomenology of Filled Rubber for Use in Anti-Vibration Design

    Get PDF
    Component design of rubber-based anti-vibration devices remains a challenge, since there is a lack of predictive models in the typical regimes encountered by anti-vibration devices that are deformed to medium dynamic strains (0.5 to 3.5) at medium strain rates (0.5/s to 10/s). An approach is proposed that demonstrates all non-linear viscoelastic effects such as hysteresis and cyclic stress softening. As it is based on a free-energy, it is fast and easily implementable. The fitting parameters behave meaningfully when changing the filler volume fraction. The model was implemented for use in the commercial finite element software ABAQUS. Examples of how to fit experimental data and simulations for a variety of carbon black filled natural rubber compounds are presented

    Nimodipino: do polimorfismo à obtenção de dispersões sólidas amorfas destinadas ao tratamento da hipertensão arterial

    Get PDF
    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciências da Saúde. Programa de Pós-Graduação em Farmácia, Florianópolis, 2013.A baixa solubilidade de fármacos apresenta-se como um dos aspectos mais desafiadores no desenvolvimento de novas formulações. O nimodipino é um bloqueador de canais de cálcio utilizado para o tratamento da hipertensão arterial e distúrbios neurológicos que apresenta reduzidas solubilidade aquosa e biodisponibilidade. Como um fator agravante, o fármaco apresenta duas formas cristalinas: um racemato metaestável (Mod I) e um conglomerado menos solúvel (Mod II). Nesse sentido, visando contornar as limitações biofarmacêuticas do nimodipino, a obtenção de dispersões sólidas foi proposta. As dispersões sólidas de nimodipino foram divididas em dois grupos, sendo o primeiro (Grupo A) constituído por nove formulações com diferentes proporções de fármaco:PVP K-30 (1:9, 2:8, 3:7, m/m) e obtidas pelas técnicas de moagem em moinho de bolas (M1, M2, M3), evaporação de solvente em spray dryer (S1, S2 e S3) e tecnologia de fluido supercrítico (F1, F2 e F3). A técnica mais adequada foi selecionada para obtenção das dispersões sólidas do segundo grupo (Grupo B), as quais foram compostas pelos carreadores PVP/VA S-630® (VA1, VA2, VA3), Eudragit EPO® (E1, E2, E3) e HPMC (H1, H2, H3), nas mesmas proporções acima mencionadas. Previamente ao desenvolvimento das formulações, estudos de pré-formulação confirmaram a presença de misturas de polimorfos em matérias-primas de nimodipino, sendo seu teor determinado através de um método quantitativo por calorimetria exploratória diferencial. O impacto do polimorfismo no efeito hipotensor do fármaco foi investigado e observou-se atividade significativamente reduzida para Mod II em 30 minutos, correspondente ao tempo de concentração plasmática máxima do fármaco. Ainda, a estabilidade química do nimodipino foi investigada através de degradações forçadas, sendo verificada, através de método indicativo de estabilidade por cromatografia líquida de alta eficiência, a instabilidade do fármaco frente à fotólise e à hidrólise. Para as dispersões sólidas compostas por PVP K-30, observou-se amorfização da maioria das formulações, associada à presença de ligações de hidrogênio estabelecidas entre fármaco e carreador. Entretanto, apenas F2 e F3 apresentaram características semicristalinas, bem como a presença do polimorfo menos solúvel Mod II. Os melhores resultados do Grupo A foram observados para F1, a qual foi capaz de aumentar em até 1300 % a solubilidade do nimodipino, além de promover 100 % de liberação do fármaco em apenas 5 minutos em ensaio de dissolução in vitro. A rápida amorfização do fármaco, associada à facilidade de escalonamento e à ausência da utilização de solventes orgânicos foram determinantes na escolha da técnica de moagem em moinho de bolas para obtenção das dispersões sólidas do Grupo B. Com relação a estas formulações, todas se apresentaram amorfas, porém sem interações químicas entre o nimodipino e os carreadores. Ainda, todas foram capazes de aprimorar as propriedades biofarmacêuticas do fármaco, com aumento da solubilidade do mesmo na faixa de 103 a 1100 %. No ensaio de dissolução in vitro o melhor resultado foi atribuído a VA 1, sendo esta formulação capaz de liberar 100 % de fármaco em até 10 minutos. Devido aos bons resultados obtidos em seus respectivos grupos, F1 e VA1 foram submetidas aos estudos in vivo, apresentando efeito hipotensor pronunciado durante todo o experimento e mínimas alterações da pressão arterial mesmo quando da administração de fenilefrina. Resultados in vivo muito expressivos para F1 foram determinantes na escolha desta como a melhor de todas as formulações obtidas. Ao final, as dispersões sólidas foram submetidas a estudos de estabilidade em dessecador por 90 dias, mantendo-se estáveis química e fisicamente durante todo o tempo analisado. Por outro lado, as formulações H1, H2 e H3, quando submetidas a 40 °C e 75 % de umidade relativa, apresentaram degradação química e recristalização a partir de 30 dias para H2 e H3. Cabe mencionar que todas as formulações apresentaram resultados promissores e inéditos relacionados ao aprimoramento das propriedades biofarmacêuticas do nimodipino, tornando-se sistemas viáveis no tratamento da hipertensão arterial.Abstract : The solubility of drugs molecules remains one of the most challenging aspects in formulation development. Nimodipine is a calcium channel blocker used for the treatment of hypertension and neurological disorders, which shows poor solubility in water and bioavailability. As an aggravating factor, the drug presents two crystalline phases: a metastable racemate (Mod I) and a less soluble conglomerate (Mod II). In this way, aiming at improving the biopharmaceutical limitations of nimodipine, the obtainment of solid dispersions was proposed. Nimodipine solid dispersions were divided in two groups, the first (Group A) being constituted by nine formulations with different ratios of drug:PVP K-30 (1:9, 2:8, 3:7, m/m), and obtained through ball milling (M1, M2, M3), spray drying (S1, S2, S3) and supercritical fluid technology (F1, F2, F3). The most appropriate technique was selected to obtain the solid dispersions of the second group (Group B), which were composed of the carriers PVP/VA S-630® (VA1, VA2, VA3), Eudragit EPO® (E1, E2, E3) and HPMC (H1, H2, H3), in the same proportions mentioned above. Previously to the development of the formulations, pre-formulation studies confirmed the presence of polymorphic mixtures in nimodipine raw materials, being your content determined through differential scanning calorimetry. The impact of the polymorphism in the hypotensive effect of the drug was investigated and significative lower activity was observed for Mod II, at 30 minutes, which corresponds to the time of nimodipine peak plasma concentration. Also, the chemical stability of nimodipine was investigated through stress conditions, being evidenced, through a stability-indicating high performance liquid chromatography method, the instability of the drug against photolysis and hydrolysis. For solid dispersions composed of PVP K-30, it was observed amorphization for most of formulations, associated with the presence of hydrogen bonds established between drug and carrier. However, only F2 and F3 presented semi-crystalline characteristics, as well as the presence of the less soluble polymorph, Mod II. The best results for Group A were observed for F1, which was able to enhance at up 1300 % the solubility of nimodipine, besides promoting the release of 100 % of the drug within 5 minutes in dissolution studies. The fast amorphization of the drug, associated to the easy scalling up and the absence of organic solvents were decisive in the choice of ball milling as the technique for the obtainment of the Group B solid dispersions. With respect to these formulations, they all showed amorphous, however, without chemical bonds between drug and carriers. Also, all of them were able to enhance the biopharmaceutical properties of the drug, with increases in the solubility of nimodipine ranging from 103 to 1100 %. In the in vitro dissolution assay, the best result was attributed to VA1, which released 100 % of the drug within 10 minutes. Due to the good results obtained, F1 and VA1 were submitted to in vivo studies, presenting pronounced hypotensive effect during all the experiment long and minimum changes in the blood pressure even against the administration of phenylephrine. Very remarkable results at in vivo assay for F1 were decisive in the choice of this formulation as the best one among all of the solid dispersions obtained. Finally, the solid dispersions were submitted to stability studies at a dessicator during 90 days, keeping themselves chemical and physically stable during the period of analysis. On the other hand, formulations H1, H2 and H3, when submitted to 40 °C and 75 % of relative humidity, presented chemical degradation and recrystallization from 30 days, for H2 and H3. It is worth mentioning that all the formulations developed presented promising and unpublished results related to the enhancement of nimodipine biopharmaceutical properties, becoming useful systems for the treatment of hypertension

    The Places of the Concept of Nation in the Narrative of Young Students of the City of Ponta Grossa: Past, Present and Future

    Get PDF
    Part of a research project of national scope entitled «o país e o mundo em poucas palavras: narrativas de jovens sobre seus pertencimentos – implicações para o ensino de Ciências Humanas», this paper brings the results of the analysis of 277 answers of students inserted in four stages of formal education of the city of Ponta Grossa, Paraná, Brasil. The issue «please, tell the history of your country» was directed to students enrolled in institutions of Elementary, Middle, Higher and Postgraduate Studies and collected from questionnaires of a qualitative nature. The analysis of the answers occurred from the arrangement of the data collected in a semantic network of graphs elaborated for visualization in cloud, which allows the examination of evocations and relations established between the keywords within the narrative set. The senses given to the past, the agents of history and the place of the narrators themselves were the research-focused elements that dialogue with the concepts of historical consciousness (Rüsen, 2007) and master narrative (Carretero; Van Alphen, 2014). As results, we bring a panorama that encompasses the elements that are mobilized in this narrative, its general characteristics: the senses given to history, and the place where students place the nation in the past (history), present (narrative), and future, from their expectations and longings.Parte de um projeto de pesquisa guarda-chuva de âmbito nacional intitulado «o país e o mundo em poucas palavras: narrativas de jovens sobre seus pertencimentos – implicações para o ensino de Ciências Humanas», este texto traz os resultados da análise de 277 respostas de alunos inseridos em quatro etapas de educação formal da cidade de Ponta Grossa, Paraná, Brasil. A consigna «por favor, conte a história do seu país» foi direciona a alunos matriculados em instituições de Ensino Fundamental, Médio, Superior e Pós-Graduação e coletada a partir de questionários de caráter qualitativo. A análise das respostas se deu a partir da disposição dos dados coletados em uma rede semântica de grafos elaborado para visualização em nuvem, possibilitando o exame de evocações e relações estabelecidas entre as palavras-chave dentro do conjunto narrativo. Os sentidos dados ao passado, os agentes da história e o lugar dos próprios narradores foram os elementos enfocados na investigação, que dialoga com os conceitos de consciência histórica (Rüsen, 2007) e narrativa mestra (Carretero; Van Alphen, 2014). Como resultado trazemos um panorama abarcando os elementos que são mobilizados nessa narrativa: suas características gerais, os sentidos dados à história e o lugar em que os alunos colocam a nação no passado (história), no presente (narrativa) e no futuro, a partir de suas expectativas e anseios

    Os efeitos do artigo 136-A da Lei das S.A. sobre a cláusula compromissória estatutária

    Get PDF
    Trabalho de conclusão de curso (graduação)—Universidade de Brasília, Faculdade de Direito, Curso de Graduação em Direito, 2017.No âmbito do Direito Arbitral, a inclusão de cláusula compromissória em estatuto de sociedade anônima é objeto de intensa discussão dogmática. Desde a edição da Lei 10.303/2001, em que se declarou a possibilidade de adoção de cláusula compromissória por parte das companhias, consagrados autores assumiram posições divergentes acerca da extensão dos efeitos da convenção de arbitragem a todos os acionistas da empresa. O debate gira em torno da compatibilização entre o princípio da autonomia da vontade – essencial à arbitragem – e o princípio majoritário – norma angular do Direito Societário. A reforma da Lei de Arbitragem, concretizada pela Lei 13.129/2015, buscou pacificar a controvérsia mediante a inclusão do art. 136-A, na Lei das Sociedades Anônimas (Lei 6.404/76). O dispositivo previu a vinculação de todos os acionistas à cláusula compromissória estatutária, mas, em contrapartida, determinou quórum qualificado para sua inclusão, bem como garantiu o direito de recesso aos sócios dissidentes. Tendo isso em vista, o presente estudo visa abordar a compatibilidade entre a arbitragem e o Direito Societário, para, num segundo momento, analisar os diferentes argumentos acerca da controvérsia inerente à inclusão da cláusula de arbitragem em estatuto social das companhias e a pertinência da adoção de institutos contramajoritários trazidos pela nova disposição legal. Por fim, serão analisadas diferentes decisões judiciais acerca da inclusão da cláusula compromissória estatutária, já sob a égide do art. 136-A.Under arbitration, the inclusion of arbitration clause in the joint stock Corporation bylaws is subject of intense dogmatic discussion. Since the enactment of Law n. 10303/2001, in which has been declared the possibility of adoption of the arbitration clause by the companies, consecrated authors have assumed different positions regarding the extension of the effects of the arbitration agreement to all shareholders. The debate revolves around the compatibility between the principle of autonomy of the will – essential to arbitration – and the majority principle – foundation norm of Corporate Law. The reform of the arbitration law, implemented by Law n. 13.129 / 2015, sought to pacify the controversy through the inclusion of article 136-A, in the Brazilian Corporate Law (Law n. 6404/76). The legal device determinates that all shareholders are bound by the statutory arbitration clause, but, on the other hand, established a qualified quorum for its inclusion as well as guaranted withdrawal rights to the dissenting partners. In light of this, the present study aims to address the compatibility between arbitration and corporate law, in order to analyze the different arguments around the controversy inherent to the inclusion of the arbitration clause in the companies' bylaws and the pertinence of the adoption of countermajority institutes by the new legal provision. Finally, different judicial decisions will be analyzed regarding the inclusion of the statutory arbitration clause, already under the aegis of article 136-A
    corecore