Development of a microbalance suitable for space application

The tapered element oscillating microbalance (TEOM), an ultrasensitive mass measurement device which is suitable for both particulate and vapor deposition measurements is described. The device can be used in contamination measurements, surface reaction studies, particulate monitoring systems or any microweighing activity where either laboratory or field monitoring capability is desired. The active element of the TEOM consists of a tube or reed constructed of a material with high mechanical quality factor and having a special taper. The element is firmly mounted at the wide end while the other end supports a substrate surface which can be composed of virtually any material. The tapered element with the substrate at the free (narrow) end is set into oscillation in a clamped free mode. A feedback system maintains the oscillation whose natural frequency will change in relation to the mass deposited on the substrate

Ice in space: An experimental and theoretical investigation

Basic knowledge is provided on the behavior of ice and ice particles under a wide variety of conditions including those of interplanetary space. This information and, in particular, the lifetime of ice particles as a function of solar distance is an absolute requirement for a proper interpretation of photometric profiles in comets. Because fundamental properties of ice and ice particles are developed in this report, the applicability of this information extends beyond the realm of comets into any area where volatile particles exist, be it in space or in the earth's atmosphere

Investigation of air solubility in jet A fuel at high pressures

The solubility and density properties of saturated mixtures of fuels and gases were measured. The fuels consisted of Jet A and dodecane, the gases were air and nitrogen. The test range included pressures of 1.03 to 10.34 MPa and temperatures of 298 to 373 K. The results were correlated successfully, using the Soave equation of state. Over this test range, dissolved gas concentrations were roughly proportional to pressure and increased slightly with increasing temperature. Mixture density was relatively independent of dissolved gas concentration

The valuation of an exploration project having inferred resources

Abstract: Mineral Asset valuation of Mineral Resources and Mineral Reserves as the single fundamental asset for a mining company, according to the SAMVAL Code, CIMVAL Code or the VALMIN code, can be carried out using three valuation approaches, namely; the Cash Flow (Income) Approach, Market Approach, and Cost Approach. Under the 2009 SAMVAL Code the Market and Cost approaches are viewed as the preferred approaches to the valuation of Exploration Properties with mainly only Inferred Mineral Resources, with the Cash Flow Approach ’not generally used’. The updated 2016 SAMVAL Code has split Exploration Properties into two categories; early stage and advanced stage Exploration Properties. For both stages of Exploration Properties the Market and Cost Approach is ‘widely used’, while the Income Approach is ’not generally used’ for early stage Exploration Properties and ’less widely used’ for advanced stage Exploration Properties. In both versions of the SAMVAL Code the Income Approach is the least preferred method for valuations of exploration projects, with only Mineral Resources and without any credible studies to assess the technical and economic viability. Under the 2016 SAMVAL Code, an advanced Exploration Property is defined as a project that has undertaken considerable exploration and a Mineral Resource estimate has been defined and a Scoping Study has been applied to determine whether there are reasonable prospects for eventual economic extraction. This paper looks at the valuation of early Exploration Properties, especially those with mainly Inferred Mineral Resources, with particular attention on the use of the Income Approach. It will discuss circumstances where Inferred Mineral Resources could be or should not be valued using in the Income Approach-based valuation methodologies

Maximal fluctuations of confined actomyosin gels: dynamics of the cell nucleus

We investigate the effect of stress fluctuations on the stochastic dynamics of an inclusion embedded in a viscous gel. We show that, in non-equilibrium systems, stress fluctuations give rise to an effective attraction towards the boundaries of the confining domain, which is reminiscent of an active Casimir effect. We apply this generic result to the dynamics of deformations of the cell nucleus and we demonstrate the appearance of a fluctuation maximum at a critical level of activity, in agreement with recent experiments [E. Makhija, D. S. Jokhun, and G. V. Shivashankar, Proc. Natl. Acad. Sci. U.S.A. 113, E32 (2016)].Comment: 12 pages, 5 figure

Soft inclusion in a confined fluctuating active gel

We study stochastic dynamics of a point and extended inclusion within a one dimensional confined active viscoelastic gel. We show that the dynamics of a point inclusion can be described by a Langevin equation with a confining potential and multiplicative noise. Using a systematic adiabatic elimination over the fast variables, we arrive at an overdamped equation with a proper definition of the multiplicative noise. To highlight various features and to appeal to different biological contexts, we treat the inclusion in turn as a rigid extended element, an elastic element and a viscoelastic (Kelvin-Voigt) element. The dynamics for the shape and position of the extended inclusion can be described by coupled Langevin equations. Deriving exact expressions for the corresponding steady state probability distributions, we find that the active noise induces an attraction to the edges of the confining domain. In the presence of a competing centering force, we find that the shape of the probability distribution exhibits a sharp transition upon varying the amplitude of the active noise. Our results could help understanding the positioning and deformability of biological inclusions, eg. organelles in cells, or nucleus and cells within tissues.Comment: 16 pages, 9 figure

Not all surveillance data are created equal—A multi‐method dynamic occupancy approach to determine rabies elimination from wildlife

1. A necessary component of elimination programmes for wildlife disease is effective surveillance. The ability to distinguish between disease freedom and non‐detection can mean the difference between a successful elimination campaign and new epizootics. Understanding the contribution of different surveillance methods helps to optimize and better allocate effort and develop more effective surveillance programmes. 2. We evaluated the probability of rabies virus elimination (disease freedom) in an enzootic area with active management using dynamic occupancy modelling of 10 years of raccoon rabies virus (RABV) surveillance data (2006–2015) collected from three states in the eastern United States. We estimated detection probability of RABV cases for each surveillance method (e.g. strange acting reports, roadkill, surveillance‐trapped animals, nuisance animals and public health samples) used by the USDA National Rabies Management Program. 3. Strange acting, found dead and public health animals were the most likely to detect RABV when it was present, and generally detectability was higher in fall– winter compared to spring–summer. Found dead animals in fall–winter had the highest detection at 0.33 (95% CI: 0.20, 0.48). Nuisance animals had the lowest detection probabilities (~0.02). 4. Areas with oral rabies vaccination (ORV) management had reduced occurrence probability compared to enzootic areas without ORV management. RABV occurrence was positively associated with deciduous and mixed forests and medium to high developed areas, which are also areas with higher raccoon (Procyon lotor) densities. By combining occupancy and detection estimates we can create a probability of elimination surface that can be updated seasonally to provide guidance on areas managed for wildlife disease. 5. Synthesis and applications. Wildlife disease surveillance is often comprised of a combination of targeted and convenience‐based methods. Using a multi‐method analytical approach allows us to compare the relative strengths of these methods, providing guidance on resource allocation for surveillance actions. Applying this multi‐method approach in conjunction with dynamic occupancy analyses better informs management decisions by understanding ecological drivers of disease occurrence

Making FORS2 fit for exoplanet observations (again)

For about three years, it was known that precision spectrophotometry with FORS2 suffered from systematic errors that made quantitative observations of planetary transits impossible. We identified the Longitudinal Atmospheric Dispersion Compensator (LADC) as the most likely culprit, and therefore engaged in a project to exchange the LADC prisms with the uncoated ones from FORS1. This led to a significant improvement in the depth of FORS2 zero points, a reduction in the systematic noise, and should make FORS2 again competitive for transmission spectroscopy of exoplanets.Comment: To appear in the March issue of the ESO Messenge

The HARPS search for southern extra-solar planets I. HD330075 b: a new 'hot Jupiter'

We report on the first extra-solar planet discovered with the brand new HARPS instrument. The planet is a typical 'hot Jupiter' with m2sini = 0.62 MJup and an orbital period of 3.39 days, but from the photometric follow-up of its parent star HD330075 we can exclude the presence of a transit. The induced radial-velocity variations exceed 100 m/s in semi-amplitude and are easily detected by state-of-the-art spectro-velocimeters. Nevertheless, the faint magnitude of the parent star (V = 9.36) benefits from the efficient instrument: With HARPS less than 10 observing nights and 3 hours of total integration time were needed to discover the planet and characterize its orbit. The orbital parameters determined from the observations made during the first HARPS run in July 2003 have been confirmed by 7 additional observations carried out in February 2004. The bisector analysis and a photometric follow-up give no hint for activity-induced radial-velocity variations, indicating that the velocity curve is best explained by the presence of a low-mass companion to the star. In this paper we present a set of 21 measurements of excellent quality with weighted rms as low as 2.0 m/s. These measurements lead to a well defined orbit and consequently to the precise orbital parameters determination of the extra-solar planet HD330075b.Comment: 5 pages, 2 figures, accepted for publication by Astronomy and Astrophysics, see also http://obswww.unige.ch/~udry/planet/planet.htm