improving the performance of wind turbines in urban environment by integrating the action of a diffuser with the aerodynamics of the rooftops

Abstract We investigated the effectiveness of combining the concentration effects generated by a dual-pitched roof and a diffuser-shaped wall mounted over a Darrieus turbine, which is rooftop mounted with horizontal shaft running close to the roof ridge. A2D CFD study was carried out in three steps: (1) we predicted the turbine basic performance with and without a convergent-divergent diffuser in a infinite and undisturbed domain; (2) the behavior of the concentration system on the rooftop were simulated in a simplified urban contest; (3) we improved both the operating conditions and the domain geometry to make them more similar to realistic urban environments. The simulations are performed by means a fully URANS since both the turbine aerodynamic forces and the urban wind field are simulated. Results show that by integrating the actions of rooftop and diffuser a significant power increasing is obtained in skewed winds. Moreover, the diffuser allows a drastic abatement of torque fluctuations

development of a bem cfd tool for vertical axis wind turbines based on the actuator disk model

Abstract The present work focuses on the numerical simulation of Vertical Axis Wind Turbines by means of an "in-house" BEM-based User Defined Function to be used 39ith the CFD code ANSYS Fluent. Typical VAWT unsteady and 3D phenomena, such as dynamic stall, flow curvature and tip losses, are taken into account by original and literature-based sub-models. The presence of the blades is mimicked by replacing them with suitable momentum sources. For the present work, the Actuator Cylinder Model has been employed. 3D analysis, of a SANDIA rotor, are carried out in order to assess the accuracy of our model against numerical simulations and experimental data. The current User Defined Function is able to give a satisfactory agreement with the reference cases especially from a qualitative point of view, with a significant computational time reduction to a factor of 10 compared to the case with the moving bodies. A typical wake behavior can be noticed in our simulations even though its recovery is strongly influenced by the lack of turbulence inherent to the chosen actuator model. The torque and the power coefficient of the turbines are also analyzed and compared against the reference cases, finding a remarkable agreement. The model has been successfully applied to predict the transient aerodynamic loads of an offshore 5 MW troposkein turbine subjected to the pitching motion of its platform. The operating conditions have been chosen in order to allow a qualitative comparison with a floating 5 MW horizontal axis turbine which performance under pitching motion is available in literature

3D URANS analysis of a vertical axis wind turbine in skewed flows

The paper demonstrates the potential of an unsteady RANS 3D approach to predict the effects of skewed winds on the performance of an H-type vertical-axis wind turbine (VAWT). The approach is validated through a comparison between numerical and experimental results for a full-scale Darrieus turbine, demonstrating an improved prediction ability of 3D CFD with respect to both 2D CFD and semi-empirical models based on the double multiple stream tubes method. A 3D URANS approach is then adopted to investigate the power increase observed for a straight-bladed small-scale turbine in a wind tunnel when the rotational axis is inclined from 0° to 15° from the vertical. The main advantage of this approach is a more realistic description of complex three-dimensional flow characteristics, such as dynamic stall, and the opportunity to derive local blade flow conditions on any blade portion during upwind and downwind paths. Consequently, in addition to deriving the turbine overall performance in terms of power coefficient, a better insight into the temporal and spatial evolution of the physical mechanisms is obtained. Our principal finding is that the power gain in skewed flows is obtained during the downwind phase of the revolution as the end part of the blade is less disturbed by the wake generated during the upwind phase

Ghost displacement

We describe a technique whereby a coherent amplitude can be imprinted nonlocally on to a beam of light with thermal statistics that has no phase information on average. We have successfully performed the first experimental realisation. The technique could have applications in the sharing of quantum information and in covert quantum imaging scenarios

Manipulating thermal light via displaced-photon subtraction

Thermal radiation played a pivotal role in the preliminary development of quantum physics where it helped resolve the apparent incongruity of the ultraviolet catastrophe. In contemporary physics, thermal state generation and manipulation finds new application in fields such as quantum imaging and quantum illumination and as a practical realization of Maxwell's demon. These applications often go hand in hand with photon subtraction operations which probabilistically amplify the mean photon number (MPN) of thermal light as a result of its super-Poissonian photon statistics. In this article, we introduce an operation for thermal states of light based on a generalized photon subtraction scheme. Displaced-photon subtraction (DPS) makes use of coherent state displacement followed by a subsequent anti-displacement in combination with single-photon detection to probe the MPN of a thermal state. We find regimes in which the output of a successful DPS is amplified, unchanged, or attenuated relative to the unconditioned output state. The regime of operation is controlled via the magnitude of the coherent displacement. A theoretical description of generalized photon subtraction of a displaced thermal state is derived via a two-mode moment-generating function (MGF) and used to describe generalized DPS. We perform a proof of principle experimental implementation of DPS for the case of a balanced beam splitter for which results demonstrate good agreement with the model

Identification and characterization of Tc1/mariner-like DNA transposons in genomes of the pathogenic fungi of the Paracoccidioides species complex

<p>Abstract</p> <p>Background</p> <p><it>Paracoccidioides brasiliensis </it>(Eukaryota, Fungi, Ascomycota) is a thermodimorphic fungus, the etiological agent of paracoccidioidomycosis, the most important systemic mycoses in Latin America. Three isolates corresponding to distinct phylogenetic lineages of the <it>Paracoccidioides </it>species complex had their genomes sequenced. In this study the identification and characterization of class II transposable elements in the genomes of these fungi was carried out.</p> <p>Results</p> <p>A genomic survey for DNA transposons in the sequence assemblies of <it>Paracoccidioides</it>, a genus recently proposed to encompass species <it>P. brasiliensis </it>(harboring phylogenetic lineages S1, PS2, PS3) and <it>P. lutzii </it>(<it>Pb01-like </it>isolates), has been completed. Eight new <it>Tc1/mariner </it>families, referred to as Trem (<b>Tr</b>ansposable <b>e</b>lement <b>m</b>ariner), labeled A through H were identified. Elements from each family have 65-80% sequence similarity with other <it>Tc1/mariner </it>elements. They are flanked by 2-bp TA target site duplications and different termini. Encoded DDD-transposases, some of which have complete ORFs, indicated that they could be functionally active. The distribution of Trem elements varied between the genomic sequences characterized as belonging to <it>P. brasiliensis </it>(S1 and PS2) and <it>P. lutzii</it>. TremC and H elements would have been present in a hypothetical ancestor common to <it>P. brasiliensis </it>and <it>P. lutzii</it>, while TremA, B and F elements were either acquired by <it>P. brasiliensis </it>or lost by <it>P. lutzii </it>after speciation. Although TremD and TremE share about 70% similarity, they are specific to <it>P. brasiliensis </it>and <it>P. lutzii</it>, respectively. This suggests that these elements could either have been present in a hypothetical common ancestor and have evolved divergently after the split between <it>P. brasiliensis </it>and <it>P. Lutzii</it>, or have been independently acquired by horizontal transfer.</p> <p>Conclusions</p> <p>New families of <it>Tc1/mariner </it>DNA transposons in the genomic assemblies of the <it>Paracoccidioides </it>species complex are described. Families were distinguished based on significant BLAST identities between transposases and/or TIRs. The expansion of Trem in a putative ancestor common to the species <it>P. brasiliensis </it>and <it>P. lutzii </it>would have given origin to TremC and TremH, while other elements could have been acquired or lost after speciation had occurred. The results may contribute to our understanding of the organization and architecture of genomes in the genus <it>Paracoccidioides</it>.</p

Prevalência parasitária de Piaractus mesopotamicus Holmberg, 1887 produzidos na região da Grande Dourados, MS.

A intensificação dos sistemas de produção com intuito de aumentar a produtividade pode levar a uma maior prevalência parasitária e consequente perdas econômicas decorrentes destas parasitoses. Parasitas é uma grande preocupação nas pisciculturas, pois resultam em perdas diretas e indiretas. O controle eficaz da doença depende de manejo sanitário integrado, que considera o hospedeiro, o meio ambiente, os parasitas e as práticas de criação. Objetivou-se estudar a prevalência parasitária de P. mesopotamicus de pisciculturas e sua relação com o ambiente e o manejo sanitário

A comprehensive clinical approach for patients requiring a temporary open abdomen treatment (OA) in the ICU

Objective We report an intensive-clinical approach in OA-treatments. Patients-and-methods 28 ICU-admissions (1996-2010): Clean-OA(3), contaminated OA(25). Blunt/penetrating trauma(1), aortic surgery(1), acute pancreatitis(15), primary or secondary peritonitis(11). Age 61\ub113; SAPS-II median-(IQR) 41(33-49); SOFA median-(IQR) 8(7-9)

New System for the Acceleration of the Airflow in Wind Turbines

Background: This patent is based on the wind industry technology called Diffuser Augmented Wind Turbines (DAWTs). This technology consists of a horizontal axis wind turbine, which is housed inside a duct with diverging section in the direction of the free air stream. In this paper, a review of preceding patents related to this technology is carried out. Objective: This paper presents an innovative patent to improve the performance of horizontal axis wind turbines. In particular, this system is aimed at improving the performance of those turbines that otherwise might not be installed due to the low wind resource existing at certain locations. Methods: The most innovative elements of this patent are: (1) the semi-spherical grooves, which are mechanized on the surface of the two diffusers in order to guarantee a more energetic boundary layer; (2) the coaxial diffuser, which is located downwind following the first diffuser in order to increase the suction effect on the air mass close to the inlet; (3) the coaxial rings located around the first diffuser outlet, which are used to deflect the external airflow toward the turbine wake; and (4), the selforientating system to orientate the system by the prevailing wind direction. Results: An application of the patent for increasing the power generated by a horizontal axis wind turbine with three blades is presented. The patent is designed and its performance is evaluated by using a Computational Fluid Dynamics code. The numerical results show that this system rises the airflow going through the rotor of the turbine. Conclusion: The patented device is an original contribution aimed at enabling a more profitable installation of wind turbines in places where the wind resource is insufficient because of the wind shear caused both by the proximity of the earth and the obstacles on the earth surface.This work was supported by the OASIS Research Project that was cofinanced by CDTI (Spanish Science and Innovation Ministry) and developed with the Spanish companies: Iridium, OHL Concesiones, Abertis, Sice, Indra, Dragados, OHL, Geocisa, GMV, Asfaltos Augusta, Hidrofersa, Eipsa, PyG, CPS, AEC and Torre de Comares Arquitectos S.L and 16 research centres. The authors also acknowledge the partial funding with FEDER funds under the Research Project FC-15-GRUPIN14-004. Finally, we also thank Swanson Analysis Inc. for the use of ANSYS University Research programs as well as the Workbench simulation environment