379 research outputs found
Developement of real time diagnostics and feedback algorithms for JET in view of the next step
Real time control of many plasma parameters will be an essential aspect in
the development of reliable high performance operation of Next Step Tokamaks.
The main prerequisites for any feedback scheme are the precise real-time
determination of the quantities to be controlled, requiring top quality and
highly reliable diagnostics, and the availability of robust control algorithms.
A new set of real time diagnostics was recently implemented on JET to prove the
feasibility of determining, with high accuracy and time resolution, the most
important plasma quantities. With regard to feedback algorithms, new
model–based controllers were developed to allow a more robust control of
several plasma parameters. Both diagnostics and algorithms were successfully
used in several experiments, ranging from H-mode plasmas to configuration with
ITBs. Since elaboration of computationally heavy measurements is often
required, significant attention was devoted to non-algorithmic methods like
Digital or Cellular Neural/Nonlinear Networks. The real time hardware and
software adopted architectures are also described with particular attention to
their relevance to ITER.Comment: 12th International Congress on Plasma Physics, 25-29 October 2004,
Nice (France
Timbre brownfield prioritization tool to support effective brownfield regeneration.
In the last decade, the regeneration of derelict or underused sites, fully or partly located in urban areas (or so called âbrownfieldsâ), has become more common, since free developable land (or so called âgreenfieldsâ) has more and more become a scare and, hence, more expensive resource, especially in densely populated areas. Although the regeneration of brownfield sites can offer development potentials, the complexity of these sites requires considerable efforts to successfully complete their revitalization projects and the proper selection of promising sites is a pre-requisite to efficiently allocate the limited financial resources. The identification and analysis of success factors for brownfield sites regeneration can support investors and decision makers in selecting those sites which are the most advantageous for successful regeneration. The objective of this paper is to present the Timbre Brownfield Prioritization Tool (TBPT), developed as a web-based solution to assist stakeholders responsible for wider territories or clusters of brownfield sites (portfolios) to identify which brownfield sites should be preferably considered for redevelopment or further investigation. The prioritization approach is based on a set of success factors properly identified through a systematic stakeholder engagement procedure. Within the TBPT these success factors are integrated by means of a Multi Criteria Decision Analysis (MCDA) methodology, which includes stakeholders' requalification objectives and perspectives related to the brownfield regeneration process and takes into account the three pillars of sustainability (economic, social and environmental dimensions). The tool has been applied to the South Moravia case study (Czech Republic), considering two different requalification objectives identified by local stakeholders, namely the selection of suitable locations for the development of a shopping centre and a solar power plant, respectively. The application of the TBPT to the case study showed that it is flexible and easy to adapt to different local contexts, allowing the assessors to introduce locally relevant parameters identified according to their expertise and considering the availability of local data
SPACA9 is a lumenal protein of human ciliary singlet and doublet microtubules
The cilium-centrosome complex contains triplet, doublet, and singlet microtubules. The lumenal surfaces of each microtubule within this diverse array are decorated by microtubule inner proteins (MIPs). Here, we used single-particle cryo-electron microscopy methods to build atomic models of two types of human ciliary microtubule: the doublet microtubules of multiciliated respiratory cells and the distal singlet microtubules of monoflagellated human spermatozoa. We discover that SPACA9 is a polyspecific MIP capable of binding both microtubule types. SPACA9 forms intralumenal striations in the B tubule of respiratory doublet microtubules and noncontinuous spirals in sperm singlet microtubules. By acquiring new and reanalyzing previous cryo-electron tomography data, we show that SPACA9-like intralumenal striations are common features of different microtubule types in animal cilia. Our structures provide detailed references to help rationalize ciliopathy-causing mutations and position cryo-EM as a tool for the analysis of samples obtained directly from ciliopathy patients
Real-time identification of the current density profile in the JET Tokamak: method and validation
International audienceThe real-time reconstruction of the plasma magnetic equilibrium in a Tokamak is a key point to access high performance regimes. Indeed, the shape of the plasma current density profile is a direct output of the reconstruction and has a leading effect for reaching a steady-state high performance regime of operation. In this paper we present the methodology followed to identify numerically the plasma current density in a Tokamak and its equilibrium. In order to meet the real-time requirements a C++ software has been developed using the combination of a finite element method, a nonlinear fixed point algorithm associated to a least square optimization procedure. The experimental measurements that enable the identification are the magnetics on the vacuum vessel, the interferometric and polarimetric measurements on several chords and the motional Stark effect. Details are given about the validation of the reconstruction on the JET tokamak, either by comparison with 'off-line' equilibrium codes or real time software computing global quantities
Identification of most relevant variables and processes to assess the environmental impacts of remediation technologies along their life cycles: Focus on the waste management scenarios
The application of Life Cycle Assessment (LCA) to remediation technologies is still not a consolidated practice and it is especially lacking in the assessment of the environmental impacts associated to the management of the waste produced during remediation. This study aims at addressing these methodological gaps by identifying the typologies of waste typically generated during the remediation of a contaminated site and classifying them according to the European Waste Catalogue (EWC) codes. Thereafter, the following steps are: (i) the identification of the waste management scenarios (WMSs) applicable to the identified waste typologies, (ii) the selection of Life Cycle Assessment processes that can be used to assess the impacts of the different WMSs and (iii) the quantification and comparison of the environmental impacts caused by the different WMSs applied considering hazardousness levels to which the same waste may belong in relation to its contamination levels and characteristics: inert, non-hazardous and hazardous waste (Waste Framework Directive 2008/98/EC). As results, a matrix reporting the classes and typologies of waste, their EWC codes, their different WMSs and the suitable LCA processes from the Ecoinvent database that can be applied to each EWC within a specific WMS, has been developed. Additionally, the comparative assessment of the impacts caused by the Ecoinvent processes applicable to the same waste typology within the same WMS has been performed to support the selection of the most appropriate WMS case by case
Requirements management support for the ITER Plasma Control System in view of first plasma operations
Occupational risk of nano-biomaterials: Assessment of nano-enabled magnetite contrast agent using the BIORIMA Decision Support System
The assessment of the safety of nano-biomedical products for patients is an essential prerequisite for their market authorization. However, it is also required to ensure the safety of the workers who may be unintentionally exposed to the nano-biomaterials (NBMs) in these medical applications during their synthesis, formulation into products and end-of-life processing and also of the medical professionals (e.g., nurses, doctors, dentists) using the products for treating patients. There is only a handful of workplace risk assessments focussing on NBMs used in medical applications. Our goal is to contribute to increasing the knowledge in this area by assessing the occupational risks of magnetite (Fe3O4) nanoparticles coated with PLGA-b-PEG-COOH used as contrast agent in magnetic resonance imaging (MRI) by applying the software-based Decision Support System (DSS) which was developed in the EU H2020 project BIORIMA. The occupational risk assessment was performed according to regulatory requirements and using state-of-the-art models for hazard and exposure assessment, which are part of the DSS. Exposure scenarios for each life cycle stage were developed using data from literature, inputs from partnering industries and results of a questionnaire distributed to healthcare professionals, i.e., physicians, nurses, technicians working with contrast agents for MRI. Exposure concentrations were obtained either from predictive exposure models or monitoring campaigns designed specifically for this study. Derived No-Effect Levels (DNELs) were calculated by means of the APROBA tool starting from in vivo hazard data from literature. The exposure estimates/measurements and the DNELs were used to perform probabilistic risk characterisation for the formulated exposure scenarios, including uncertainty analysis. The obtained results revealed negligible risks for workers along the life cycle of magnetite NBMs used as contrast agent for the diagnosis of tumour cells in all exposure scenarios except in one when risk is considered acceptable after the adoption of specific risk management measures. The study also demonstrated the added value of using the BIORIMA DSS for quantification and communication of occupational risks of nano-biomedical applications and the associated uncertainties
Controlling the risks of nano-enabled products through the life cycle: The case of nano copper oxide paint for wood protection and nano-pigments used in the automotive industry
The widespread use of engineered nanomaterials (ENMs) in consumer products and the overwhelming uncertainties in their ecological and human health risks have raised concerns regarding their safety among industries and regulators. There has been an ongoing debate over the past few decades on ways to overcome the challenges in assessing and mitigating nano-related risks, which has reached a phase of general consensus that nanotechnology innovation should be accompanied by the application of the precautionary principle and best practice risk management, even if the risk assessment uncertainties are large. We propose a quantitative methodology for selecting the optimal risk control strategy based on information about human health and ecological risks, efficacy of risk mitigation measures, cost and other contextual factors. The risk control (RC) methodology was developed in the European FP7 research project SUN and successfully demonstrated in two case studies involving real industrial nano-enabled products (NEPs): nano-scale copper oxide (CuO) and basic copper carbonate (Cuâ(OH)âCOâ) used as antimicrobial and antifungal coatings and impregnations for the preservation of treated wood, and two nanoscale pigments used for colouring plastic automotive parts (i.e. red organic pigment and carbon black). The application of RC for human health risks showed that although nano-related risks could easily be controlled in automotive plastics case study with modifications in production technology or specific type of engineering controls, nano-related risks due to sanding and sawing copper oxide painted wood were non-acceptable in the use lifecycle stage and would need the identification of a more effective risk control strategy
Observation of confined current ribbon in JET plasmas
we report the identification of a localised current structure inside the JET
plasma. It is a field aligned closed helical ribbon, carrying current in the
same direction as the background current profile (co-current), rotating
toroidally with the ion velocity (co-rotating). It appears to be located at a
flat spot in the plasma pressure profile, at the top of the pedestal. The
structure appears spontaneously in low density, high rotation plasmas, and can
last up to 1.4 s, a time comparable to a local resistive time. It considerably
delays the appearance of the first ELM.Comment: 10 pages, 6 figure
- âŠ