1,433 research outputs found
Ytterbium doped nano-crystalline optical fiber for reduced photodarkening
We report suppression of photodarkening in Yb-doped nano-crystalline fibers in silica host. The photodarkening induced loss reduced by 20 times compared to Yb-doped aluminosilicate fibers. The laser efficiency of the nano-crystalline fiber was 79%
Neural Correlates Related to Anxiety in Attentional Inhibition Control: an Erp Study
We investigated the effect of anxiety on attentional inhibitory control using event-related
potentials (ERPs) and measuring the response time. Nineteen participants performed a multisource interference task; three-digit numbers and emotional faces were used as visual stimuli.
The P100 and P300 ERP-components and response time values were used to evaluate whether
ERP parameters and behavioral responses are associated with increased anxiety. Higher
anxiety was associated with a longer latency and reduced amplitude of the P300 component
at F3, whereas higher anxiety was associated with a shorter latency and higher amplitude of
P300 at F4. The longer P300 latency at F3 was especially related to the response time to the
target number with negative-expression faces as distracters.Ми досліджували вплив рівня тривожності на гальмівний
контроль уваги з використанням реєстрації пов’язаних із
подією потенціалів (ППП) та вимірювання часу реакції.
19 тестованих виконували мультистимульний тест з інтерференцією; як візуальні стимули застосовували зображення тризначних чисел та облич з емоціональними виразами.
Параметри Р100 та Р300 компонентів ППП та час реакції
брали до уваги для того, щоб визначити можливість асоційованості параметрів ППП та поведінкових відповідей з рівнем тривожності. Підвищена тривожність була асоційована
з довшими латентними періодами та зниженою амплітудою
компонента Р300 у відведенні F3, тоді як такий рівень тривожності асоціювався з меншими величинами латентного
періоду цієї ж самої хвилі та її вищою амплітудою у відведенні F4. Більший латентний період Р300 у відведенні F3
особливо чітко корелював із часом відповіді на цільове число на тлі облич із негативними виразами як відволікаючих
факторів
Multi-wavelength fiber laser with erbium doped zirconia fiber and semiconductor optical amplifier
Multi-wavelength hybrid fiber lasers are demonstrated in both ring and linear cavities using a fabricated Erbium-doped Zirconia fiber (EDZF) and semiconductor optical amplifier (SOA) as gain media. In both configurations, the a fiber loop mirror, which is constructed using a 3 m long polarization maintaining fiber (PMF) and a polarization insensitive 3dB coupler is used as a comb filter for the fiber laser. In the ring cavity, 10 simultaneous lines with peak power above -26 dBm is obtained at 1550 nm region. This is an improvement compared to the linear cavity configuration which has only 5 simultaneous lines observed from wavelength 1556.1 nm to 1563.0 nm with the peak power above -40 dBm. Both hybrid lasers has a constant line spacing of 1.7 nm, which is suitable for wavelength division multiplexing and sensing applications and shows a stable operation at room temperature
A Method for Assaying Deubiquitinating Enzymes
A general method for the assay of deubiquitinating enzymes was described in detail using (125)I-labeled ubiquitin-fused αNH-MHISPPEPESEEEEEHYC (referred to as Ub-PESTc) as a substrate. Since the tyrosine residue in the PESTc portion of the fusion protein was almost exclusively radioiodinated under a mild labeling condition, such as using IODO-BEADS, the enzymes could be assayed directly by simple measurement of the radioactivity released into acid soluble products. Using this assay protocol, we could purify six deubiquitinating enzymes from chick skeletal muscle and yeast and compare their specific activities. Since the extracts of E. coli showed little or no activity against the substrate, the assay protocol should be useful for identification and purification of eukaryotic deubiquitinating enzymes cloned and expressed in the cells
Effects of phosphate and hydrogen peroxide on the performance of a biological activated carbon filter for enhanced biofiltration
Biofilm formation on biofilters can influence their hydraulic performance, thereby leading to head loss and an increase in energy use and costs for water utilities. The effects of a range of factors, including hydrogen peroxide and phosphate, on the performance of biological activated carbon (BAC) and biofilm formation were investigated using laboratory-scale columns. Head loss, total carbohydrates, and proteins were reduced in the nutrient-enhanced, oxidant-enhanced, and nutrient + oxidant-enhanced BAC filters. However, there were no changes in the removal of dissolved organic matter, trihalomethane formation potential, or selected trace organic contaminants. The biofilm formation on polyvinyl chloride and stainless steel coupons using the laboratory biofilm reactor system was lower when the effluent from a nutrient-enhanced column was used, which indicated that there was less biofilm formation in the distribution systems. This may have been because the effluent from the nutrient-enhanced column was more biologically stable. Therefore, enhanced biofiltration could be used not only to reduce head loss in biofilters, but also to delay biofilm formation in distribution systems
Iron under Earth's core conditions: Liquid-state thermodynamics and high-pressure melting curve
{\em Ab initio} techniques based on density functional theory in the
projector-augmented-wave implementation are used to calculate the free energy
and a range of other thermodynamic properties of liquid iron at high pressures
and temperatures relevant to the Earth's core. The {\em ab initio} free energy
is obtained by using thermodynamic integration to calculate the change of free
energy on going from a simple reference system to the {\em ab initio} system,
with thermal averages computed by {\em ab initio} molecular dynamics
simulation. The reference system consists of the inverse-power pair-potential
model used in previous work. The liquid-state free energy is combined with the
free energy of hexagonal close packed Fe calculated earlier using identical
{\em ab initio} techniques to obtain the melting curve and volume and entropy
of melting. Comparisons of the calculated melting properties with experimental
measurement and with other recent {\em ab initio} predictions are presented.
Experiment-theory comparisons are also presented for the pressures at which the
solid and liquid Hugoniot curves cross the melting line, and the sound speed
and Gr\"{u}neisen parameter along the Hugoniot. Additional comparisons are made
with a commonly used equation of state for high-pressure/high-temperature Fe
based on experimental data.Comment: 16 pages including 6 figures and 5 table
Affective Man-Machine Interface: Unveiling human emotions through biosignals
As is known for centuries, humans exhibit an electrical profile. This profile is altered through various psychological and physiological processes, which can be measured through biosignals; e.g., electromyography (EMG) and electrodermal activity (EDA). These biosignals can reveal our emotions and, as such, can serve as an advanced man-machine interface (MMI) for empathic consumer products. However, such a MMI requires the correct classification of biosignals to emotion classes. This chapter starts with an introduction on biosignals for emotion detection. Next, a state-of-the-art review is presented on automatic emotion classification. Moreover, guidelines are presented for affective MMI. Subsequently, a research is presented that explores the use of EDA and three facial EMG signals to determine neutral, positive, negative, and mixed emotions, using recordings of 21 people. A range of techniques is tested, which resulted in a generic framework for automated emotion classification with up to 61.31% correct classification of the four emotion classes, without the need of personal profiles. Among various other directives for future research, the results emphasize the need for parallel processing of multiple biosignals
Single Spin Asymmetry in Polarized Proton-Proton Elastic Scattering at GeV
We report a high precision measurement of the transverse single spin
asymmetry at the center of mass energy GeV in elastic
proton-proton scattering by the STAR experiment at RHIC. The was measured
in the four-momentum transfer squared range \GeVcSq, the region of a significant interference between the
electromagnetic and hadronic scattering amplitudes. The measured values of
and its -dependence are consistent with a vanishing hadronic spin-flip
amplitude, thus providing strong constraints on the ratio of the single
spin-flip to the non-flip amplitudes. Since the hadronic amplitude is dominated
by the Pomeron amplitude at this , we conclude that this measurement
addresses the question about the presence of a hadronic spin flip due to the
Pomeron exchange in polarized proton-proton elastic scattering.Comment: 12 pages, 6 figure
Longitudinal double-spin asymmetry and cross section for inclusive neutral pion production at midrapidity in polarized proton collisions at sqrt(s) = 200 GeV
We report a measurement of the longitudinal double-spin asymmetry A_LL and
the differential cross section for inclusive Pi0 production at midrapidity in
polarized proton collisions at sqrt(s) = 200 GeV. The cross section was
measured over a transverse momentum range of 1 < p_T < 17 GeV/c and found to be
in good agreement with a next-to-leading order perturbative QCD calculation.
The longitudinal double-spin asymmetry was measured in the range of 3.7 < p_T <
11 GeV/c and excludes a maximal positive gluon polarization in the proton. The
mean transverse momentum fraction of Pi0's in their parent jets was found to be
around 0.7 for electromagnetically triggered events.Comment: 6 pages, 3 figures, submitted to Phys. Rev. D (RC
Partonic flow and -meson production in Au+Au collisions at = 200 GeV
We present first measurements of the -meson elliptic flow
() and high statistics distributions for different
centralities from = 200 GeV Au+Au collisions at RHIC. In
minimum bias collisions the of the meson is consistent with the
trend observed for mesons. The ratio of the yields of the to those of
the as a function of transverse momentum is consistent with a model
based on the recombination of thermal quarks up to GeV/,
but disagrees at higher momenta. The nuclear modification factor () of
follows the trend observed in the mesons rather than in
baryons, supporting baryon-meson scaling. Since -mesons are
made via coalescence of seemingly thermalized quarks in central Au+Au
collisions, the observations imply hot and dense matter with partonic
collectivity has been formed at RHIC.Comment: 6 pages, 4 figures, submit to PR
- …