Structural, optical and magnetic properties of Zn1−xMnxO micro-rod arrays synthesized by spray pyrolysis method

Undoped and Mn-doped ZnO micro-rod arrays were fabricated by the spray pyrolysis method on glass substrates. X-ray diffraction and scanning electron microscopy showed that these micro-rod arrays had a polycrystalline wurtzite structure and high c-axis preferred orientation. Photoluminescence studies at 10 K show that the increase of manganese content leads to a relative decrease in deep level band intensity with respect to undoped ZnO. Magnetic measurements indicated that undoped ZnO was diamagnetic in nature whereas Mn-doped ZnO samples exhibited ferromagnetic behavior at room temperature, which is possibly related to the substitution of Mn ions (Mn2+) for Zn ions in the ZnO lattice

Structural, optical and magnetic properties of Cr doped ZnO microrods prepared by spray pyrolysis

A series of Cr-doped ZnO micro-rod arrays were fabricated by a spray pyrolysis method. X-ray diffraction patterns of the samples showed that the undoped and Cr-doped ZnO microrods exhibit hexagonal crystal structure. Surface morphology analysis of the samples has revealed that pure ZnO sample has a hexagonal microrod morphology. From X-ray photoelectron spectroscopy studies, the Cr 2p3/2 binding energy is found to be 577.34 eV indicating that the electron binding energy of the Cr in ZnO is almost the same as the binding energy of Cr3+ states in Cr2O3. The optical band gap Eg decreases slightly from 3.26 to 3.15 eV with the increase of actual Cr content from x = 0.00 to 4.63 at % in ZnO. Photoluminescence studies at 10 K show that the incorporation of chromium leads to a relative increase of deep level band intensity. It was also observed that Cr doped samples clearly showed ferromagnetic behavior; however, 2.49 % Cr doped ZnO showed remnant magnetization higher than that of 1.07 % and 4.63 % Cr doped samples, while 4.63 % Cr doped ZnO samples had a coercive field higher than the other dopings

Effect of adhesive system, resin cement, heat-pressing technique, and thermomechanical aging on the adhesion between titanium base and a high-performance polymer.

STATEMENT OF PROBLEM Even though polyetheretherketone (PEEK) has become popular for various prosthetic indications, a standard adhesive protocol to bond the PEEK to titanium bases has not been yet established. How the heat-pressing technique performs in this respect is also not clear. PURPOSE The purpose of this in vitro study was to investigate the effect of an adhesive system-cement combination, the heat-pressing technique, and thermomechanical aging on the retention force between titanium bases and PEEK specimens. MATERIAL AND METHODS Sixty 9×11×20-mm PEEK specimens with a titanium base slot integrated into the design were milled to simulate an implant-supported PEEK framework for a cantilevered fixed prosthesis. The specimens were assigned to 8 groups (n=10) according to the titanium base primer (MKZ or Monobond) and resin cement (DTK or Multilink hybrid) used and with or without thermomechanical aging. Twenty PEEK specimens were directly heat-pressed on titanium bases, and half of the specimens were not subjected to thermomechanical aging (n=10). For nonaged groups, the PEEK specimen complex was tightened to an implant analog and secured on a custom-made pull-off device. Retention forces were measured by using the pull-off tensile test in a universal testing machine, and the maximum tensile bond strength (MPa) was calculated. The aged groups were subjected to 5000 cycles of thermal aging (5 °C to 55 °C), and the specimens were clamped to load the extension (cantilever) for 1 200 000 cycles with 120 N and 200 N at 1.5-Hz frequency. After aging, the pull-off test was performed for those specimens that survived thermomechanical aging. A nonparametric Kruskal-Wallis test was used to determine whether there was a difference among the groups, followed by pairwise Wilcoxon rank tests with Bonferroni correction. The Wilcoxon rank test was used to analyze the effect of thermomechanical aging in each adhesive system-cement or heat-press group (α=.05 for all tests). RESULTS None of the specimens failed during cyclic loading. According to the Kruskal-Wallis test, the effect of the PEEK-Ti base bonding technique on the retention force in the nonaged (P=.019) and thermomechanically aged groups was significant (P=.010). In the nonaged groups, the heat-pressing technique resulted in a higher retention force than when the specimens were bonded by using the Monobond-Multilink hybrid combination (P=.031). Thermomechanical aging did not significantly affect the results (P>.241). All failures were adhesive, with cement remaining only on the Ti-bases. CONCLUSIONS All bonding protocols tested resulted in a stable bond between PEEK and Ti-bases, as all specimens survived thermomechanical aging. The heat-pressing technique resulted in mean bond strength values similar to those obtained with the tested adhesive system-cement combinations with 1 exception; the nonaged heat-pressed groups presented higher bond strength than the Monobond-Multilink hybrid combination. Failure types indicated that the weaker bond was between the PEEK and the cements tested rather than between the titanium base and the cements, regardless of the adhesive system-cement combination

Effects of Cu diffusion-doping on structural, optical and magnetic properties of ZnO nanorod arrays grown by VPT

Well-aligned ZnO nanorods were prepared by the vapor phase transport method on Si covered with a ZnO buffer layer. After the nanostructure growth, Cu was doped into the ZnO nanorods by diffusion at three different temperatures and for different times. Undoped and Cu diffusion-doped ZnO samples are highly textured, with the c axis of the wurtzite structure along the growth direction. The incorporation of Cu caused some slight changes in the nanorod alignment, although the wurtzite crystal structure was maintained. X-ray photoelectron spectroscopy measurements revealed that Cu ions were in a divalent state and substituted for the Zn2+ ions of the ZnO matrix. Photoluminescence results at 10 K indicate that the incorporation of copper leads to a relative increase of Cu-related structured green band deep level intensity. Magnetic measurements revealed that both undoped and Cu diffusion-doped ZnO samples exhibited room temperature ferromagnetism. It was also found that bound magnetic polarons play an important role in the appearance of room temperature ferromagnetism in Cu diffusion-doped ZnO nanorods

A retrospective comparison of allogeneic peripheral blood stem cell and bone marrow transplantation results from a single center: A focus on the incidence of graft-vs.-host disease and relapse

To detect the effect of the stem cell source, allogeneic peripheral blood stem cell transplantations (alloPBSCTs) performed between 1995 and 1997 from human leukocyte antigen (HLA)-identical siblings in 40 patients with acute and chronic hematological disorders were compared with a historical group of 40 patients with similar variables who had received allogeneic bone marrow transplants (alloBMTs) between 1993 and 1995. Patients in both groups were identical except that both the recipient and the donor ages were, on average, higher in the alloPBSCT group (26 vs. 36 [p = 0.005] and 27 vs. 32 [p = 0.024], respectively). Patients received similar therapy excluding posttransplant granulocyte colony-stimulating factor administration (97% in alloBMT vs. 12.5% in alloPBSCT). The median time to reach neutrophil counts >0.5×109/L and platelet counts >20×109/L was 13 and 14 days, respectively, in patients receiving alloPBSCTs compared with 19 and 27 days in patients receiving alloBMTs (p = 0.0014 and p = 0.0002). The alloPBSCT group required similar transfusions of red blood cells or platelets. The incidence of grade II-IV acute graft-vs.-host disease (aGVHD) was similar in both groups. However, chronic GVHD (cGVHD) of all grades developed in 78.1% of patients in the alloPBSCT group after a median follow-up period of 12.5 (range 0.5-34) months. In alloBMT recipients, cGVHD of all grades developed in 21.4% after a median follow-up period of 38 (range 0.5-62) months (p = 0.00001). Day 100 transplant-related mortality was also similar: 20% (8 of 40) in the alloBMT patients and 17.5% (7 of 40) in the alloPBSCT group. Although not statistically significant, a relatively higher relapse rate occurred in the alloBMT group (21.4 vs. 10.7%). The estimated disease-free survival in month 24 was 51.3% for alloBMT and 54.6% for alloPBSCT, and the estimated overall survival in month 24 was 56.1% for alloBMT and 64.6% for alloPBSCT. In conclusion, this retrospective comparison suggests that alloPBSCT from HLA-identical donors is associated with faster engraftment, fewer transfusions, and no greater incidence of aGVHD, but a high incidence of cGVHD

HE-LHC: The High-Energy Large Hadron Collider – Future Circular Collider Conceptual Design Report Volume 4

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries

Evidence and gap map of studies assessing the effectiveness of interventions for people with disabilities in low‐and middle‐income countries

Background: There are approximately 1 billion people in the world with some form of disability. This corresponds to approximately 15% of the world's population (World Report on Disability, 2011). The majority of people with disabilities (80%) live in low- and middle-income countries (LMICs), where disability has been shown to disproportionately affect the most disadvantaged sector of the population. Decision makers need to know what works, and what does not, to best invest limited resources aimed at improving the well-being of people with disabilities in LMICs. Systematic reviews and impact evaluations help answer this question. Improving the availability of existing evidence will help stakeholders to draw on current knowledge and to understand where new research investments can guide decision-making on appropriate use of resources. Evidence and gap maps (EGMs) contribute by showing what evidence there is, and supporting the prioritization of global evidence synthesis needs and primary data collection. Objectives: The aim of this EGM is to identify, map and describe existing evidence of effectiveness studies and highlight gaps in evidence base for people with disabilities in LMICs. The map helps identify priority evidence gaps for systematic reviews and impact evaluations. Methods: The EGM included impact evaluation and systematic reviews assessing the effect of interventions for people with disabilities and their families/carers. These interventions were categorized across the five components of community-based rehabilitation matrix; health, education, livelihood, social and empowerment. Included studies looked at outcomes such as, health, education, livelihoods, social inclusion and empowerment, and were published for LMICs from 2000 onwards until January 2018. The searches were conducted between February and March 2018. The EGM is presented as a matrix in which the rows are intervention categories (e.g., health) and subcategories (e.g., rehabilitation) and the column outcome domains (e.g., health) and subdomains (e.g., immunization). Each cell lists the studies for that intervention for those outcomes, with links to the available studies. Included studies were therefore mapped according to intervention and outcomes assessed and additional filters as region, population and study design were also coded. Critical appraisal of included systematic review was done using A Measurement Tool to Assess Systematic Reviews’ rating scale. We also quality-rated the impact evaluation using a quality assessment tool based on various approaches to risk of bias assessment. Results: The map includes 166 studies, of which 59 are systematic reviews and 107 impact evaluation. The included impact evaluation are predominantly quasiexperimental studies (47%). The numbers of studies published each year have increased steadily from the year 2000, with the largest number published in 2017.The studies are unevenly distributed across intervention areas. Health is the most heavily populated area of the map. A total of 118 studies of the 166 studies concern health interventions. Education is next most heavily populated with 40 studies in the education intervention/outcome sector. There are relatively few studies for livelihoods and social, and virtually none for empowerment. The most frequent outcome measures are health-related, including mental health and cognitive development (n = 93), rehabilitation (n = 32), mortality and morbidity (n = 23) and health check-up (n = 15). Very few studies measured access to assistive devices, nutrition and immunization. Over half (n = 49) the impact evaluation come from upper-middle income countries. There are also geographic gaps, most notably for low income countries (n = 9) and lower-middle income countries (n = 34). There is a fair amount of evidence from South Asia (n = 73) and Sub-Saharan Africa (n = 51). There is a significant gap with respect to study quality, especially with respect to impact evaluation. There appears to be a gap between the framing of the research, which is mostly within the medical model and not using the social model of disability. Conclusion: Investing in interventions to improve well-being of people with disabilities will be critical to achieving the 2030 agenda for sustainable development goals. The EGM summarized here provides a starting point for researchers, decision makers and programme managers to access the available research evidence on the effectiveness of interventions for people with disabilities in LMICs in order to guide policy and programme activity, and encourage a more strategic, policy-oriented approach to setting the future research agenda

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat