Promising bulk nanostructured Cu₂Se thermoelectrics via high throughput and rapid chemical synthesis

A facile and high yield synthesis route was developed for the fabrication of bulk nanostructured copper selenide (Cu2Se) with high thermoelectric efficiency. Starting from readily available precursor materials and by means of rapid and energy-efficient microwave-assisted thermolysis, nanopowders of Cu2Se were synthesized. Powder samples and compacted pellets have been characterized in detail for their structural, microstructural and transport properties. alpha to beta phase transition of Cu2Se was confirmed using temperature dependent X-ray powder diffraction and differential scanning calorimetry analyses. Scanning electron microscopy analysis reveals the presence of secondary globular nanostructures in the order of 200 nm consisting of <50 nm primary particles. High resolution transmission electron microscopy analysis confirmed the highly crystalline nature of the primary particles with irregular truncated morphology. Through a detailed investigation of different parameters in the compaction process, such as applied load, heating rate, and cooling profiles, pellets with preserved nanostructured grains were obtained. An applied load during the controlled cooling profile was demonstrated to have a big impact on the final thermoelectric efficiency of the consolidated pellets. A very high thermoelectric figure of merit (ZT) above 2 was obtained at 900 K for SPS-compacted Cu2Se nanopowders in the absence of the applied load during the controlled cooling step. The obtained ZT exceeds the state of the art in the temperature ranges above phase transition, approaching up to 25% improvement at 900 K. The results demonstrate the prominent improvement in ZT attributed both to the low thermal conductivity, as low as 0.38 W m(-1) K-1 at 900 K, and the enhancement in the power factor of nanostructured Cu2Se. The proposed synthesis scheme as well as the consolidation could lead to reliable production of large scale thermoelectric nanopowders for niche applications

Seismic Response of Underground Lifeline Systems

This paper presents and discusses the recent developments related to seismic performance and assessment of buried pipelines. The experience from the performance of pipelines during last earthquakes provided invaluable information and lead to new developments in the analysis and technologies. Especially, the pipeline performance during Canterbury earthquake sequence in New Zealand is taken as a case study here. The data collected for the earthquake sequence are unprecedented in size and detail, involving ground motion recordings from scores of seismograph stations, high resolution light detection and ranging (LiDAR) measurements of vertical and lateral movements after each event, and detailed repair records for thousands of km of underground pipelines with coordinates for the location of each repair. One of the important learnings from the recent earthquakes is that some earthquake resistant design and technologies proved to be working. This provides a motivation to increase international exchange and cooperation on earthquake resistant technologies. Another observation is that preventive maintenance is important to reduce the pipeline damage risk from seismic and other hazards. To increase the applicability and sustainability, seismic improvements should be incorporated into the pipe replacement and asset management programs as part of the preventive maintenance concept. However, it is also important to put in the most proper pipeline from the start as replacing or retrofitting the pipelines later requires substantial investment. In this respect, seismic considerations should be taken into account properly in the design phase

Indoor air quality in a restaurant kitchen using margarine for deep-frying

Indoor air quality has a great impact on human health. Cooking, in particular frying, is one of the most important sources of indoor air pollution. Indoor air CO, CO2, particulate matter (PM), and volatile organic compound (VOC) concentrations, including aldehydes, were measured in the kitchen of a small establishment where a special deep-frying margarine was used. The objective was to assess occupational exposure concentrations for cooks of such restaurants. While individual VOC and PM2.5 concentrations were measured before, during, and after frying events using active sampling, TVOC, PM10, CO, CO2, temperature, and relative humidity were continuously monitored through the whole period. VOC and aldehyde concentrations did not increase to considerable levels with deep-frying compared to the background and public indoor environment levels, whereas PM10 increased significantly (1.85 to 6.6 folds). The average PM2.5 concentration of the whole period ranged between 76 and 249 μg/m3. Hence, considerable PM exposures could occur during deep-frying with the special margarine, which might be sufficiently high to cause health effects on cooks considering their chronic occupational exposures.Dokuz Eylul University (BAP-2011.KB.SAG.017

Analytic philosophy for biomedical research: the imperative of applying yesterday's timeless messages to today's impasses

The mantra that "the best way to predict the future is to invent it" (attributed to the computer scientist Alan Kay) exemplifies some of the expectations from the technical and innovative sides of biomedical research at present. However, for technical advancements to make real impacts both on patient health and genuine scientific understanding, quite a number of lingering challenges facing the entire spectrum from protein biology all the way to randomized controlled trials should start to be overcome. The proposal in this chapter is that philosophy is essential in this process. By reviewing select examples from the history of science and philosophy, disciplines which were indistinguishable until the mid-nineteenth century, I argue that progress toward the many impasses in biomedicine can be achieved by emphasizing theoretical work (in the true sense of the word 'theory') as a vital foundation for experimental biology. Furthermore, a philosophical biology program that could provide a framework for theoretical investigations is outlined

Mechanical Characterization of One-Headed Myosin-V Using Optical Tweezers

Class V myosin (myosin-V) is a cargo transporter that moves along an actin filament with large (∼36-nm) successive steps. It consists of two heads that each includes a motor domain and a long (23 nm) neck domain. One of the more popular models describing these steps, the hand-over-hand model, assumes the two-headed structure is imperative. However, we previously succeeded in observing successive large steps by one-headed myosin-V upon optimizing the angle of the acto-myosin interaction. In addition, it was reported that wild type myosin-VI and myosin-IX, both one-headed myosins, can also generate successive large steps. Here, we describe the mechanical properties (stepsize and stepping kinetics) of successive large steps by one-headed and two-headed myosin-Vs. This study shows that the stepsize and stepping kinetics of one-headed myosin-V are very similar to those of the two-headed one. However, there was a difference with regards to stability against load and the number of multisteps. One-headed myosin-V also showed unidirectional movement that like two-headed myosin-V required 3.5 kBT from ATP hydrolysis. This value is also similar to that of smooth muscle myosin-II, a non-processive motor, suggesting the myosin family uses a common mechanism for stepping regardless of the steps being processive or non-processive. In this present paper, we conclude that one-headed myosin-V can produce successive large steps without following the hand-over-hand mechanism

Developmental variations in plasma leptin, leptin soluble receptor and their molar ratio in healthy infants

<p>Abstract</p> <p>Background</p> <p>Leptin and its soluble receptor (sOB-R) are important to regulation of body composition but there are no data on the developmental variations in these plasma variables and their relationship with body composition measurements,</p> <p>Methods</p> <p>Weight, length, and body composition (bone, fat and lean mass) by dual energy absorptiometry, and plasma variables were measured in healthy infants at 2, 4, 8 and 12 months.</p> <p>Results</p> <p>15 whites and 29 African Americans (21 males and 23 females) with mean birth weight 3357 +/- 45 (SEM) g and gestation of 39.3 +/- 0.17 weeks were studied. The overall Z score for weight, length and weight for length during the study were 0.00 +/- 0.15, -0.08 +/- 0.11 and 0.12 +/- 0.14 respectively. With increasing age, plasma leptin (1.0 to 18.2, median 5.5 ng/mL) and sOB-R:leptin molar ratio (10.1 to 247.4, median 59.9) were lowered (r = -0.47, p < 0.01; and r = -0.37, p < 0.05 respectively), best predicted by weight Z score and percentage of fat mass, and higher in African American and female. Presence of body composition measurements eliminated the race and gender effect on the plasma variables. Plasma sOB-R (49.5 to 173.9, median 81.3 ng/mL) did not change significantly with age and was correlated and predicted only by body composition measurements.</p> <p>Conclusion</p> <p>In healthy growing infants, plasma leptin but not sOB-R decreases with age. Gender, race and anthropometric measurements are additional physiological determinants predictive of plasma leptin and the receptor:ligand ratio. However, body composition is the only variable that can predict plasma leptin and its soluble receptor and the receptor: ligand ratio; and body composition measurements eliminated the race and gender effect on these plasma variables.</p

Minería de datos para el descubrimiento de patrones en enfermedades respiratorias en Bogotá, Colombia

Trabajo de InvestigaciónEl presente proyecto se basa en la aplicación de minería de datos mediante el algoritmo de clustering K- means que permita la generación de un modelo descriptivo con el análisis de los datos y con el objetivo de identificar posibles comportamientos en enfermedades respiratorias en la ciudad de Bogotá. El conjunto de clústeres generados por la herramienta RapidMiner es la recopilación de datos de un periodo de cinco años de 2012 a 2016, en donde se contemplan el número de casos asociados a 184 diagnósticos de enfermedades respiratorias y la edad de los pacientes corresponde de 0 a 5 años.Trabajo de Investigación1. GENERALIDADES 2. OBJETIVOS 3. JUSTIFICACIÓN 4. DELIMITACIÓN 5. MARCO REFERENCIAL 6. METODOLOGÍA 7. FUENTES DE EXTRACCIÓN Y SUS VARIABLES 8. DISEÑO 9. SELECCIÓN DE ALGORITMOS DE CLUSTERING 10. RECONOCER PATRONES A PARTIR DE LA INFORMACIÓN RECOPILADA 11. CONCLUSIONES 12. TRABAJOS FUTUROS 13. REFERENCIAS BIBLIOGRÁFICAS 14. ANEXOSPregradoIngeniero de Sistema

Post-Vasectomy Semen Analysis: Optimizing Laboratory Procedures and Test Interpretation through a Clinical Audit and Global Survey of Practices

Purpose: The success of vasectomy is determined by the outcome of a post-vasectomy semen analysis (PVSA). This article describes a step-by-step procedure to perform PVSA accurately, report data from patients who underwent post vasectomy semen analysis between 2015 and 2021 experience, along with results from an international online survey on clinical practice. Materials and methods: We present a detailed step-by-step protocol for performing and interpretating PVSA testing, along with recommendations for proficiency testing, competency assessment for performing PVSA, and clinical and laboratory scenarios. Moreover, we conducted an analysis of 1,114 PVSA performed at the Cleveland Clinic's Andrology Laboratory and an online survey to understand clinician responses to the PVSA results in various countries. Results: Results from our clinical experience showed that 92.1% of patients passed PVSA, with 7.9% being further tested. A total of 78 experts from 19 countries participated in the survey, and the majority reported to use time from vasectomy rather than the number of ejaculations as criterion to request PVSA. A high percentage of responders reported permitting unprotected intercourse only if PVSA samples show azoospermia while, in the presence of few non-motile sperm, the majority of responders suggested using alternative contraception, followed by another PVSA. In the presence of motile sperm, the majority of participants asked for further PVSA testing. Repeat vasectomy was mainly recommended if motile sperm were observed after multiple PVSA's. A large percentage reported to recommend a second PVSA due to the possibility of legal actions. Conclusions: Our results highlighted varying clinical practices around the globe, with controversy over the significance of non-motile sperm in the PVSA sample. Our data suggest that less stringent AUA guidelines would help improve test compliance. A large longitudinal multi-center study would clarify various doubts related to timing and interpretation of PVSA and would also help us to understand, and perhaps predict, recanalization and the potential for future failure of a vasectomy