2,126 research outputs found
Efficacy of tofacitinib monotherapy in methotrexate-naive patients with early or established rheumatoid arthritis.
IntroductionTofacitinib is an oral Janus kinase inhibitor for the treatment of rheumatoid arthritis (RA). Tofacitinib monotherapy was previously shown to inhibit structural damage, reduce clinical signs and symptoms of RA, and improve physical functioning over 24 months in methotrexate (MTX)-naive adult patients with RA. In this post hoc analysis, we compared efficacy and safety of tofacitinib in patients with early (disease duration <1 year) versus established (≥1 year) RA.MethodsMTX-naive patients ≥18 years with active RA received tofacitinib monotherapy (5 or 10 mg two times a day, or MTX monotherapy, in a 24-month Phase 3 trial.ResultsOf 956 patients (tofacitinib 5 mg two times a day, n=373; tofacitinib 10 mg two times a day, n=397; MTX, n=186), 54% had early RA. Baseline disease activity and functional disability were similar in both groups; radiographic damage was greater in patients with established RA. At month 24, clinical response rates were significantly greater in patients with early versus established RA in the tofacitinib 5 mg two times a day group. Both tofacitinib doses had greater effects on clinical, functional and radiographic improvements at 1 and 2 years compared with MTX, independent of disease duration. No new safety signals were observed.ConclusionsTreatment response was generally similar in early and established RA; significantly greater improvements were observed at month 24 with tofacitinib 5 mg two times a day in early versus established RA. Tofacitinib 5 and 10 mg two times a day demonstrated greater efficacy versus MTX irrespective of disease duration. No difference in safety profiles was observed between patients with early or established RA.Trial registration numberNCT01039688; Results
The archaeological contribution of forensic craniofacial reconstruction to a portrait drawing of a Korean historical figure
Craniofacial reconstruction (CFR) is a technique used to rebuild the living facial appearance onto a skull in order to recognise or identify an individual. This technique is primarily employed in forensic investigation, but also utilised in archaeological research to recreate the faces of paleontological and archaeological humans. In this study, the face of a 17th century historical figure from Korea was reconstructed utilising computerized tomography from the mummified remains. A geographic surface comparison programme was employed to evaluate the accuracy of the CFR produced using a three-dimensional computerized modelling system. Analysis of the facial tissue depth discrepancies demonstrated that the CFR may have acceptable resemblance to the living face of the historical individual. Using computerised graphic technology, the CFR outcome, along with the archaeological information about the hair style, ornaments, and dress discovered in the tomb, a portrait-styled in the typical drawing trend from the era was created. The research suggests that current CFR techniques can provide an accurate portrait drawing of historical figures in Korea
End-to-End Probabilistic Inference for Nonstationary Audio Analysis
Accepted to the Thirty-sixth International Conference on Machine Learning (ICML) 2019Accepted to the Thirty-sixth International Conference on Machine Learning (ICML) 2019Accepted to the Thirty-sixth International Conference on Machine Learning (ICML) 2019A typical audio signal processing pipeline includes multiple disjoint analysis stages, including calculation of a time-frequency representation followed by spectrogram-based feature analysis. We show how time-frequency analysis and nonnegative matrix factorisation can be jointly formulated as a spectral mixture Gaussian process model with nonstationary priors over the amplitude variance parameters. Further, we formulate this nonlinear model's state space representation, making it amenable to infinite-horizon Gaussian process regression with approximate inference via expectation propagation, which scales linearly in the number of time steps and quadratically in the state dimensionality. By doing so, we are able to process audio signals with hundreds of thousands of data points. We demonstrate, on various tasks with empirical data, how this inference scheme outperforms more standard techniques that rely on extended Kalman filtering
Latent force models for sound: Learning modal synthesis parameters and excitation functions from audio recordings
Latent force models are a Bayesian learning technique that combine physical knowledge with dimensionality reduction - sets of coupled differential equations are modelled via shared dependence on a low-dimensional latent space. Analogously, modal sound synthesis is a technique that links physical knowledge about the vibration of objects to acoustic phenomena that can be observed in data. We apply latent force modelling to sinusoidal models of audio recordings, simultaneously inferring modal synthesis parameters (stiffness and damping) and the excitation or contact force required to reproduce the behaviour of the observed vibrational modes. Exposing this latent excitation function to the user constitutes a controllable synthesis method that runs in real time and enables sound morphing through interpolation of learnt parameters
UNIFYING PROBABILISTIC MODELS FOR TIME-FREQUENCY ANALYSIS
In audio signal processing, probabilistic time-frequency models have many
benefits over their non-probabilistic counterparts. They adapt to the incoming
signal, quantify uncertainty, and measure correlation between the signal's
amplitude and phase information, making time domain resynthesis
straightforward. However, these models are still not widely used since they
come at a high computational cost, and because they are formulated in such a
way that it can be difficult to interpret all the modelling assumptions. By
showing their equivalence to Spectral Mixture Gaussian processes, we illuminate
the underlying model assumptions and provide a general framework for
constructing more complex models that better approximate real-world signals.
Our interpretation makes it intuitive to inspect, compare, and alter the models
since all prior knowledge is encoded in the Gaussian process kernel functions.
We utilise a state space representation to perform efficient inference via
Kalman smoothing, and we demonstrate how our interpretation allows for
efficient parameter learning in the frequency domain.Comment: Accepted to International Conference on Acoustics, Speech and Signal
Processing (ICASSP) 201
A novel role for XIAP in copper homeostasis through regulation of MURR1
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/102131/1/emboj7600031.pd
"Nutraceuticals" in relation to human skeletal muscle and exercise.
Skeletal muscles have a fundamental role in locomotion and whole body metabolism, with muscle mass and quality being linked to improved health and even lifespan. Optimizing nutrition in combination with exercise is considered an established, effective ergogenic practice for athletic performance. Importantly, exercise and nutritional approaches also remain arguably the most effective countermeasure for muscle dysfunction associated with aging and numerous clinical conditions, e.g., cancer cachexia, COPD, and organ failure, via engendering favorable adaptations such as increased muscle mass and oxidative capacity. Therefore, it is important to consider the effects of established and novel effectors of muscle mass, function, and metabolism in relation to nutrition and exercise. To address this gap, in this review, we detail existing evidence surrounding the efficacy of a nonexhaustive list of macronutrient, micronutrient, and "nutraceutical" compounds alone and in combination with exercise in relation to skeletal muscle mass, metabolism (protein and fuel), and exercise performance (i.e., strength and endurance capacity). It has long been established that macronutrients have specific roles and impact upon protein metabolism and exercise performance, (i.e., protein positively influences muscle mass and protein metabolism), whereas carbohydrate and fat intakes can influence fuel metabolism and exercise performance. Regarding novel nutraceuticals, we show that the following ones in particular may have effects in relation to1) muscle mass/protein metabolism: leucine, hydroxyl β-methylbutyrate, creatine, vitamin-D, ursolic acid, and phosphatidic acid; and2) exercise performance: (i.e., strength or endurance capacity): hydroxyl β-methylbutyrate, carnitine, creatine, nitrates, and β-alanine
Associations of exercise-induced hormone profiles and gains in strength and hypertrophy in a large cohort after weight training
The purpose of this study was to investigate associations between acute exercise-induced hormone responses and adaptations to high intensity resistance training in a large cohort (n = 56) of young men. Acute post-exercise serum growth hormone (GH), free testosterone (fT), insulin-like growth factor (IGF-1) and cortisol responses were determined following an acute intense leg resistance exercise routine at the midpoint of a 12-week resistance exercise training study. Acute hormonal responses were correlated with gains in lean body mass (LBM), muscle fibre cross-sectional area (CSA) and leg press strength. There were no significant correlations between the exercise-induced elevations (area under the curve—AUC) of GH, fT and IGF-1 and gains in LBM or leg press strength. Significant correlations were found for cortisol, usually assumed to be a hormone indicative of catabolic drive, AUC with change in LBM (r = 0.29, P < 0.05) and type II fibre CSA (r = 0.35, P < 0.01) as well as GH AUC and gain in fibre area (type I: r = 0.36, P = 0.006; type II: r = 0.28, P = 0.04, but not lean mass). No correlations with strength were observed. We report that the acute exercise-induced systemic hormonal responses of cortisol and GH are weakly correlated with resistance training-induced changes in fibre CSA and LBM (cortisol only), but not with changes in strength
Purification and biochemical characterization of four iron superoxide dismutases in Trypanosoma cruzi
Four superoxide dismutase (SOD) activities (SOD I, II, III, and IV) have been characterized in the epimastigote
form of
Trypanosoma cruzi
. The total extract was subjected to two successive ammonium sulphate additions between
35 and 85%, and the resulting fraction was purified using two continuous chromatography processes (ion exchange
and filtration). Enzymes were insensitive to cyanide but sensitive to hydrogen peroxide, properties characteristic of
iron-containing SODs. The molecular masses of the different SODs were 20 kDa (SOD I), 60 kDa (SOD II), 50 kDa
(SOD III) and 25 kDa (SOD IV), whereas the isoelectric points were 6.9, 6.8, 5.2 and 3.8, respectively. Subcellular
location and digitonin experiments have shown that these SODs are mainly cytosolic, with small amounts in the low-
mass organelles (SOD II and SOD I) and the mitochondrion (SOD III), where these enzymes play an important role
in minimizing oxidative damage.Financial support: CGL2006-27889-E/BOS, Ministerio de Ciencia y Tecnología
Development and validation of a questionnaire to measure moral distress in community pharmacists
The Author(s) 2016. . This article is published with open access at Springerlink.com This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Jayne L. Astbury, and Cathal T. Gallagher, 'Development and validation of a questionnaire to measure moral distress in community pharmacists', International Journal of Clinical Pharmacy (2017) Vol 39(1): 156-164, first published online on 22 December 2016, the version of record is available on line via doi: 10.1007/s11096-016-0413-3 Funding for this work was provided by Pharmacy Research UK (PRUK).Background Pharmacists work within a highly-regulated occupational sphere, and are bound by strict legal frameworks and codes of professional conduct. This regulatory environment creates the potential for moral distress to occur due to the limitations it places on acting in congruence with moral judgements. Very little research regarding this phenomenon has been undertaken in pharmacy: thus, prominent research gaps have arisen for the development of a robust tool to measure and quantify moral distress experienced in the profession. Objective The aim of this study was to develop an instrument to measure moral distress in community pharmacists. Setting Community pharmacies in the United Kingdom. Method This study adopted a three-phase exploratory sequential mixed-method design. Three semi-structured focus groups were then conducted to allow pharmacists to identify and explore scenarios that cause moral distress. Each of the identified scenarios were developed into a statement, which was paired with twin seven-point Likert scales to measure the frequency and intensity of the distress, respectively. Content validity, reliability, and construct validity were all tested, and the questionnaire was refined. Main outcome measure The successful development of the valid instrument for use in the United Kingdom. Results This research has led to the development of a valid and reliable instrument to measure moral distress in community pharmacists in the UK. The questionnaire has already been distributed to a large sample of community pharmacists. Conclusion Results from this distribution will be used to inform the formulation of coping strategies for dealing with moral distress.Peer reviewedFinal Published versio
- …