Nanotailoring Stereolithography Resins for Unique Applications using Carbon Nanotubes

Nanostructured materials and exploiting their properties in stereolithography (SL) may open new markets for unique rapidly manufactured functional devices. Controlled amounts of multiwalled carbon nanotubes (MWCNTs) were successfully dispersed in SL epoxy-based resins and complex three-dimensional (3D) parts were successfully fabricated by means of a multi-material SL setup. The effect of the nanosized filler was evaluated using mechanical testing. Small dispersions of MWCNTs resulted in significant effects on the physical properties of the polymerized resin. A MWCNT concentration of .05 wt% (w/v) in DSM Somos® WaterShed™ 11120 resin increased the ultimate tensile stress and fracture stress an average of 17% and 37%, respectively. Electron microscopy was used to examine the morphology of the nanocomposite and results showed affinity between the MWCNTs and SL resin and identified buckled nanotubes that illustrated strong interfacial bonding. These improved physical properties may provide opportunities for using nanocomposite SL resins in end-use applications. Varying types and concentrations of nanomaterials can be used to tailor existing SL resins for particular applications.Mechanical Engineerin

Study of Different Aging Conditions for Analysis of Microstructure and Mechanical Properties of F357 Alloy Fabricated in LPBF Printer

Aluminum F357 is a widely used material for casting in aerospace and additive manufacturing industry. Heat treatments are commonly applied to some aluminum alloys to modify its properties. With a further study on the aging and performance of the F357 with 3D printing technology, several industries benefit of this, military, automotive and aerospace are some examples, because the numerous components casted in service. This work presents mechanical properties of F357 specimens fabricated with EOS technology and subjected to heat treatments. Heat treatments conditions were applied to tensile specimens and tested. Furthermore, the specimens were subjected to artificial thermal aging for 100 h and 1000 h at two different temperatures (285 ºF and 350 ºF), and their mechanical properties were also determined. Finally, remarks on the comparison between the heat treatments and the effect of thermal aging on the microstructures and mechanical properties of the specimens will be presented.Mechanical Engineerin

Genome-enabled phylogeographic investigation of the quarantine pathogen Ralstonia solanacearum race 3 biovar 2 and screening for sources of resistance against its core effectors.

Phylogeographic studies inform about routes of pathogen dissemination and are instrumental for improving import/export controls. Genomes of seventeen isolates of the bacterial wilt and potato brown rot pathogen Ralstonia solanacearum race 3 biovar 2 (R3bv2), a select agent in the USA, were thus analyzed to get insight into the phylogeography of this pathogen. Thirteen of fourteen isolates from Europe, Africa, and Asia were found to belong to a single clonal lineage while isolates from South America were genetically diverse and carried ancestral alleles at the analyzed genomic loci consistent with a South American origin of R3bv2. The R3bv2 isolates share a core repertoire of thirty-one type III-secreted effector genes representing excellent candidates to be targeted with resistance genes in breeding programs to develop durable disease resistance. Towards this goal, 27 R3bv2 effectors were tested in eggplant, tomato, pepper, tobacco, and lettuce for induction of a hypersensitive-like response indicative of recognition by cognate resistance receptors. Fifteen effectors, eight of them core effectors, triggered a response in one or more plant species. These genotypes may harbor resistance genes that could be identified and mapped, cloned and expressed in tomato or potato, for which sources of genetic resistance to R3bv2 are extremely limited.National Science Foundatio

3D Printing Multi-Functionality: Embedded RF Antennas and Components

Significant research and press has recently focused on the fabrication freedom of Additive Manufacturing (AM) to create both conceptual models and final end-use products. This flexibility allows design modifications to be immediately reflected in 3D printed structures, creating new paradigms within the manufacturing process. 3D printed products will inevitably be fabricated locally, with unit-level customization, optimized to unique mission requirements. However, for the technology to be universally adopted, the processes must be enhanced to incorporate additional technologies; such as electronics, actuation, and electromagnetics. Recently, a novel 3D printing platform, Multi3D manufacturing, was funded by the presidential initiative for revitalizing manufacturing in the USA using 3D printing (America Makes - also known as the National Additive Manufacturing Innovation Institute). The Multi3D system specifically targets 3D printed electronics in arbitrary form; and building upon the potential of this system, this paper describes RF antennas and components fabricated through the integration of material extrusion 3D printing with embedded wire, mesh, and RF elements

"Kultur" als Form symbolischer Gewalt: Grenzziehungsprozesse im Kontext von Migration am Beispiel der Schweiz

Die Schweiz gilt international als Modell eines gelungenen Multikulturalismus, dann nämlich wenn es das Zusammenleben der vier Sprachgruppen (Romands, DeutschschweizerInnen, TessinerInnen, RäteromanInnen) betrifft. Ein sprachlicher wie auch religiöser Pluralismus ist und war stets ein Grundbaustein des Selbstverständnisses der „Willensnation“ Schweiz. Geht es aber um MigrantInnen präsentiert sich die Geschichte anders, denn in diesem Falle erscheinen religiöse und ethnisch-kulturelle Pluralität vorwiegend als problematisch. MigrantInnen gehören entsprechend den öffentlichen und politischen Diskursen nicht zum multikulturellen Staat, vielmehr sind Prozesse kollektiver Grenzziehungen und damit Schließungsmechanismen zu beobachten, in denen Ethnizität, Religion und Kultur zu den wichtigsten Differenzierungsmerkmale werden, wie Gemeinsamkeiten gegen innen (SchweizerInnen) und Barrieren gegen außen (Ausländer, Migranten, Muslims, etc.) hergestellt werden. Ich argumentiere in diesem Kapitel, dass sich dieser „Kulturdiskurs“ im letzten Jahrzehnt verstärkt hat und gleichzeitig semantischen Verschiebungen unterworfen war. Mittels der Grenzziehungsperspektive wird historisch nachvollzogen, wie Zuwanderung und Integration in politischen Debatten und Gesetz zunehmend kulturalisiert und ethnisiert wurden. Ein Fallbeispiel aus der Forschung dient mir anschließend der Veranschaulichung dieser theoretischen Perspektive und dieses „neuen“ Essentialismus

A specific insertion of a solo-LTR characterizes the Y-chromosome of Bryonia dioica (Cucurbitaceae)

Background: Relatively few species of flowering plants are dioecious and even fewer are known to have sex chromosomes. Current theory posits that homomorphic sex chromosomes, such as found in Bryonia dioica (Cucurbitaceae), offer insight into the early stages in the evolution of sex chromosomes from autosomes. Little is known about these early steps, but an accumulation of transposable element sequences has been observed on the Ychromosomes of some species with heteromorphic sex chromosomes. Recombination, by which transposable elements are removed, is suppressed on at least part of the emerging Y-chromosome, and this may explain the correlation between the emergence of sex chromosomes and transposable element enrichment. Findings: We sequenced 2321 bp of the Y-chromosome in Bryonia dioica that flank a male-linked marker, BdY1, reported previously. Within this region, which should be suppressed for recombination, we observed a solo-LTR nested in a Copia-like transposable element. We also found other, presumably paralogous, solo-LTRs in a consensus sequence of the underlying Copia-like transposable element. Conclusions: Given that solo-LTRs arise via recombination events, it is noteworthy that we find one in a genomic region where recombination should be suppressed. Although the solo-LTR could have arisen before recombination was suppressed, creating the male-linked marker BdY1, our previous study on B. dioica suggested that BdY1 may not lie in the recombination-suppressed region of the Y-chromosome in all populations. Presence of a solo-LTR near BdY1 therefore fits with the observed correlation between retrotransposon accumulation and the suppression of recombination early in the evolution of sex chromosomes. These findings further suggest that the homomorphic sex chromosomes of B. dioica, the first organism for which genetic XY sex-determination was inferred, are evolutionarily young and offer reference information for comparative studies of other plant sex chromosomes

Activity and Process Stability of Purified Green Pepper (Capsicum annuum) Pectin Methylesterase

Pectin methylesterase (PME) from green bell peppers (Capsicum annuum) was extracted and purified by affinity chromatography on a CNBr-Sepharose-PMEI column. A single protein peak with pectin methylesterase activity was observed. For the pepper PME, a biochemical characterization in terms of molar mass (MM), isoelectric points (pI), and kinetic parameters for activity and thermostability was performed. The optimum pH for PME activity at 22 °C was 7.5, and its optimum temperature at neutral pH was between 52.5 and 55.0 °C. The purified pepper PME required the presence of 0.13 M NaCl for optimum activity. Isothermal inactivation of purified pepper PME in 20 mM Tris buffer (pH 7.5) could be described by a fractional conversion model for lower temperatures (55?57 °C) and a biphasic model for higher temperatures (58?70 °C). The enzyme showed a stable behavior toward high-pressure/temperature treatments. Keywords: Capsicum annuum; pepper; pectin methylesterase; purification; characterization; thermal and high-pressure stabilit