886 research outputs found
ARID3B: A novel regulator of the Kaposi's sarcoma-associated herpesvirus lytic cycle
Kaposi's sarcoma-associated herpesvirus (KSHV) is the causative agent of commonly fatal malignancies of immunocompromised individuals, including primary effusion lymphoma (PEL) and Kaposi's sarcoma (KS). A hallmark of all herpesviruses is their biphasic life cycle—viral latency and the productive lytic cycle—and it is well established that reactivation of the KSHV lytic cycle is associated with KS pathogenesis. Therefore, a thorough appreciation of the mechanisms that govern reactivation is required to better understand disease progression. The viral protein replication and transcription activator (RTA) is the KSHV lytic switch protein due to its ability to drive the expression of various lytic genes, leading to reactivation of the entire lytic cycle. While the mechanisms for activating lytic gene expression have received much attention, how RTA impacts cellular function is less well understood. To address this, we developed a cell line with doxycycline-inducible RTA expression and applied stable isotope labeling of amino acids in cell culture (SILAC)-based quantitative proteomics. Using this methodology, we have identified a novel cellular protein (AT-rich interacting domain containing 3B [ARID3B]) whose expression was enhanced by RTA and that relocalized to replication compartments upon lytic reactivation. We also show that small interfering RNA (siRNA) knockdown or overexpression of ARID3B led to an enhancement or inhibition of lytic reactivation, respectively. Furthermore, DNA affinity and chromatin immunoprecipitation assays demonstrated that ARID3B specifically interacts with A/T-rich elements in the KSHV origin of lytic replication (oriLyt), and this was dependent on lytic cycle reactivation. Therefore, we have identified a novel cellular protein whose expression is enhanced by KSHV RTA with the ability to inhibit KSHV reactivation
Boundary Interactions of Rough non-Gaussian Surfaces
Surface topography is important as it influences contact load-carrying capacity and operational efficiency through generated friction, as well as wear. As a result, a plethora of machining processes and surface finishing techniques have been developed. These processes yield topographies, which are often non-Gaussian, with roughness parameters that alter hierarchically according to their interaction heights. They are also subject to change through processes of rapid initial running-in wear as well as any subsequent gradual wear and embedding. The stochastic nature of the topography makes for complexity of contact mechanics of rough surfaces, which was first addressed by the pioneering work of Greenwood and Williamson, which among other issues is commemorated by this contribution. It is shown that their seminal contribution, based on idealised Gaussian topography and mean representation of asperity geometry should be extended for practical applications where surfaces are often non-Gaussian, requiring the inclusion of surface-specific data which also evolve through process of wear. The paper highlights a process dealing with practical engineering surfaces from laboratory-based testing using a sliding tribometer to accelerated fired engine testing for high performance applications of cross-hatched honed cylinder liners. Such an approach has not hitherto been reported in literature
Modelling Ultrasonic Inspection of Rough Defects
Ultrasonic signals are affected by the nature of the defects under investigation. One defect property known to alter signal amplitudes and pulse shapes is surface roughness. No exact theory is available to describe the interaction of ultrasonic waves with rough defects but approximate theories are of great value, over various regimes of validity [1,2]. We have combined one such approximation. Kirchhoff theory [1,2], with many aspects of a real inspection system, to provide a model for simulating the ultrasonic inspection of randomly rough defects. The model is currently acoustic, such that mode conversion effects cannot be predicted. This paper presents some details of the model, together with sample results. These include a comparison with experimental measurements from rough surfaces, showing favourable agreement
Utilising proteomic approaches to understand oncogenic human herpesviruses
The γ‑herpesviruses Epstein-Barr virus and Kaposi's sarcoma‑associated herpesvirus are successful pathogens, each infecting a large proportion of the human population. These viruses persist for the life of the host and may each contribute to a number of malignancies, for which there are currently no cures. Large‑scale proteomic-based approaches provide an excellent means of increasing the collective understanding of the proteomes of these complex viruses and elucidating their numerous interactions within the infected host cell. These large‑scale studies are important for the identification of the intricacies of viral infection and the development of novel therapeutics against these two important pathogens
Surface Characterisation Based Tool Wear Monitoring in Peripheral milling
The progress of surface metrology in the last decade has led to improved 3D characterisation of surfaces which offers the possibility of monitoring manufacturing operations to give highly detailed information regarding the machine tool condition. This paper presents a case study where areal surface characterisation is used to monitor tool wear in peripheral milling. Due to the fact that tool wear has a direct effect on the machined workpiece surface, the machined surface topography contains much information concerning the machining conditions including the tool wear state. Through analysing the often subtle changes in the surface topography the tool wear state can be highlighted. This paper utilises areal surface characterization, areal auto-correlation function (AACF) and pattern analysis to illustrate the effect of tool wear on the workpiece surface. The result shows that: (1) tool wear, previously difficult to detect will influence almost all of the areal surface parameters; (2) the pattern features of AACF spectrum can reflect the subtle surface texture variation with increasing tool wear. The authors consider that, combined analysis of the surface roughness and its AACF spectrum are a good choice for monitoring the tool wear state especially with the latest developments in on-machine surface metrology
Quantitative test of the barrier nucleosome model for statistical positioning of nucleosomes up- and downstream of transcription start sites
The positions of nucleosomes in eukaryotic genomes determine which parts of
the DNA sequence are readily accessible for regulatory proteins and which are
not. Genome-wide maps of nucleosome positions have revealed a salient pattern
around transcription start sites, involving a nucleosome-free region (NFR)
flanked by a pronounced periodic pattern in the average nucleosome density.
While the periodic pattern clearly reflects well-positioned nucleosomes, the
positioning mechanism is less clear. A recent experimental study by Mavrich et
al. argued that the pattern observed in S. cerevisiae is qualitatively
consistent with a `barrier nucleosome model', in which the oscillatory pattern
is created by the statistical positioning mechanism of Kornberg and Stryer. On
the other hand, there is clear evidence for intrinsic sequence preferences of
nucleosomes, and it is unclear to what extent these sequence preferences affect
the observed pattern. To test the barrier nucleosome model, we quantitatively
analyze yeast nucleosome positioning data both up- and downstream from NFRs.
Our analysis is based on the Tonks model of statistical physics which
quantifies the interplay between the excluded-volume interaction of nucleosomes
and their positional entropy. We find that although the typical patterns on the
two sides of the NFR are different, they are both quantitatively described by
the same physical model, with the same parameters, but different boundary
conditions. The inferred boundary conditions suggest that the first nucleosome
downstream from the NFR (the +1 nucleosome) is typically directly positioned
while the first nucleosome upstream is statistically positioned via a
nucleosome-repelling DNA region. These boundary conditions, which can be
locally encoded into the genome sequence, significantly shape the statistical
distribution of nucleosomes over a range of up to ~1000 bp to each side.Comment: includes supporting materia
Explaining lifelong loyalty: The role of identity fusion and self-shaping group events
Pledging lifelong loyalty to an ingroup can have far-reaching behavioural effects, ranging from ordinary acts of ingroup kindness to extraordinary acts of self-sacrifice. What motivates this important form of group commitment? Here, we propose one especially potent answer to this question–the experience of a visceral sense of oneness with a group (i.e., identity fusion). In a sample of British football fans, a population in which high levels of lifelong loyalty are thought to be common, we first examined the hypothesised relationship between fusion and perceptions of lifelong loyalty to one’s club. We further explored the hypothesis that fusion and lifelong loyalty are not merely a reflection of past time investment in a group, but also reflect a deeper, memory-based process of feeling personally shaped by key group events, both euphoric and dysphoric. We found broad support for these hypotheses. Results suggest that feeling personally self-shaped by club events (e.g., crucial wins and losses), rather than time invested in the club, leads to greater identity fusion to one’s club. In turn, fusion engenders a sense of lifelong club loyalty. We discuss our findings in relation to the growing literature on the experiential origins of intense social cohesion
Extremely high He isotope ratios in MORB-source mantle from the proto-Iceland plume
The high <sup>3</sup>He/<sup>4</sup>He ratio of volcanic rocks thought to be derived from mantle plumes is taken as evidence for the existence of a mantle reservoir that has remained largely undegassed since the Earth's accretion. The helium isotope composition of this reservoir places constraints on the origin of volatiles within the Earth and on the evolution and structure of the Earth's mantle. Here we show that olivine phenocrysts in picritic basalts presumably derived from the proto-Iceland plume at Baffin Island, Canada, have the highest magmatic <sup>3</sup>He/<sup>4</sup>He ratios yet recorded. A strong correlation between <sup>3</sup>He/<sup>4</sup>He and <sup>87</sup>Sr/<sup>86</sup>Sr, <sup>143</sup>Nd/<sup>144</sup>Nd and trace element ratios demonstrate that the <sup>3</sup>He-rich end-member is present in basalts that are derived from large-volume melts of depleted upper-mantle rocks. This reservoir is consistent with the recharging of depleted upper-mantle rocks by small volumes of primordial volatile-rich lower-mantle material at a thermal boundary layer between convectively isolated reservoirs. The highest <sup>3</sup>He/<sup>4</sup>He basalts from Hawaii and Iceland plot on the observed mixing trend. This indicates that a <sup>3</sup>He-recharged depleted mantle (HRDM) reservoir may be the principal source of high <sup>3</sup>He/<sup>4</sup>He in mantle plumes, and may explain why the helium concentration of the 'plume' component in ocean island basalts is lower than that predicted for a two-layer, steady-state model of mantle structure
Adverse reactions to metal debris occur with all types of hip replacement not just metal-on-metal hips: a retrospective observational study of 3340 revisions for adverse reactions to metal debris from the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man.
BACKGROUND: Adverse reactions to metal debris (ARMD) have resulted in the high short-term failure rates observed with metal-on-metal hip replacements. ARMD has recently been reported in non-metal-on-metal total hip replacements (non-MoM THRs) in a number of small cohort studies. However the true magnitude of this complication in non-MoM THRs remains unknown. We used a nationwide database to determine the risk of ARMD revision in all non-MoM THRs, and compared patient and surgical factors associated with ARMD revision between non-MoM and MoM hips. METHODS: We performed a retrospective observational study using data from the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man. All primary hip replacements undergoing revision surgery for ARMD were included (n = 3,340). ARMD revision risk in non-MoM THRs was compared between different commonly implanted bearing surfaces and femoral head sizes (Chi-squared test). Differences in patient and surgical factors between non-MoM hips and MoM hips revised for ARMD were also analysed (Chi-squared test and unpaired t-test). RESULTS: Of all ARMD revisions, 7.5% (n = 249) had non-MoM bearing surfaces. The relative risk of ARMD revision was 2.35 times (95% CI 1.76-3.11) higher in ceramic-on-ceramic bearings compared with hard-on-soft bearings (0.055 vs. 0.024%; p < 0.001), and 2.80 times (95% CI 1.74-4.36) higher in 36 mm metal-on-polyethylene bearings compared to 28 mm and 32 mm metal-on-polyethylene bearings (0.058 vs. 0.021%; p < 0.001). ARMD revisions were performed earlier in non-MoM hips compared to MoM hips (mean 3.6-years vs. 5.6-years; p < 0.0001). Non-MoM hips had more abnormal findings at revision (63.1 vs. 35.7%; p < 0.001), and more intra-operative adverse events (6.4 vs. 1.6%; p < 0.001) compared to MoM hips. CONCLUSIONS: Although the overall risk of ARMD revision surgery in non-MoM THRs appears low, this risk is increasing, and is significantly higher in ceramic-on-ceramic THRs and 36 mm metal-on-polyethylene THRs. ARMD may therefore represent a significant clinical problem in non-MoM THRs
- …