35,309 research outputs found
Heat transfer in rotating serpentine passages with trips normal to the flow
Experiments were conducted to determine the effects of buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. The experiments were conducted with a large scale, multipass, heat transfer model with both radially inward and outward flow. Trip strips on the leading and trailing surfaces of the radial coolant passages were used to produce the rough walls. An analysis of the governing flow equations showed that four parameters influence the heat transfer in rotating passages: coolant-to-wall temperature ratio, Rossby number, Reynolds number, and radius-to-passage hydraulic diameter ratio. The first three of these four parameters were varied over ranges which are typical of advanced gas turbine engine operating conditions. Results were correlated and compared to previous results from stationary and rotating similar models with trip strips. The heat transfer coefficients on surfaces, where the heat increased with rotation and buoyancy, varied by as much as a factor of four. Maximum values of the heat transfer coefficients with high rotation were only slightly above the highest levels obtained with the smooth wall model. The heat transfer coefficients on surfaces, where the heat transfer decreased with rotation, varied by as much as a factor of three due to rotation and buoyancy. It was concluded that both Coriolis and buoyancy effects must be considered in turbine blade cooling designs with trip strips and that the effects of rotation were markedly different depending upon the flow direction
Heat transfer in rotating serpentine passages with trips skewed to the flow
Experiments were conducted to determine the effects of buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. The experiments were conducted with a large scale, multi-pass, heat transfer model with both radially inward and outward flow. Trip strips, skewed at 45 deg to the flow direction, were machined on the leading and trailing surfaces of the radial coolant passages. An analysis of the governing flow equations showed that four parameters influence the heat transfer in rotating passages: coolant-to-wall temperature, rotation number, Reynolds number, and radius-to-passage hydraulic diameter ratio. The first three of these four parameters were varied over ranges which are typical of advanced gas turbine engine operating conditions. Results were correlated and compared to previous results from similar stationary and rotating models with smooth walls and with trip strips normal to the flow direction. The heat transfer coefficients on surfaces, where the heat transfer decreased with rotation and buoyancy, decreased to as low as 40 percent of the value without rotation. However, the maximum values of the heat transfer coefficients with high rotation were only slightly above the highest levels previously obtained with the smooth wall models. It was concluded that (1) both Coriolis and buoyancy effects must be considered in turbine blade cooling designs with trip strips, (2) the effects of rotation are markedly different depending upon the flow direction, and (3) the heat transfer with skewed trip strips is less sensitive to buoyancy than the heat transfer in models with either smooth or normal trips. Therefore, skewed trip strips rather than normal trip strips are recommended and geometry-specific tests are required for accurate design information
Heat transfer in rotating serpentine passages with selected model orientation for smooth or skewed trip walls
Experiments were conducted to determine the effects of model orientation as well as buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. Turbine blades have internal coolant passage surfaces at the leading and trailing edges of the airfoil with surfaces at angles which are as large as +/- 50 to 60 degrees to the axis of rotation. Most of the previously-presented, multiple-passage, rotating heat transfer experiments have focused on radial passages aligned with the axis of rotation. Results from serpentine passages with orientations 0 and 45 degrees to the axis of rotation which simulate the coolant passages for the mid chord and trailing edge regions of the rotating airfoil are compared. The experiments were conducted with rotation in both directions to simulate serpentine coolant passages with the rearward flow of coolant or with the forward flow of coolant. The experiments were conducted for passages with smooth surfaces and with 45 degree trips adjacent to airfoil surfaces for the radial portion of the serpentine passages. At a typical flow condition, the heat transfer on the leading surfaces for flow outward in the first passage with smooth walls was twice as much for the model at 45 degrees compared to the model at 0 degrees. However, the differences for the other passages and with trips were less. In addition, the effects of buoyancy and Coriolis forces on heat transfer in the rotating passage were decreased with the model at 45 degrees, compared to the results at 0 degrees. The heat transfer in the turn regions and immediately downstream of the turns in the second passage with flow inward and in the third passage with flow outward was also a function of model orientation with differences as large as 40 to 50 percent occurring between the model orientations with forward flow and rearward flow of coolant
Defining and identifying communities in networks
The investigation of community structures in networks is an important issue
in many domains and disciplines. This problem is relevant for social tasks
(objective analysis of relationships on the web), biological inquiries
(functional studies in metabolic, cellular or protein networks) or
technological problems (optimization of large infrastructures). Several types
of algorithm exist for revealing the community structure in networks, but a
general and quantitative definition of community is still lacking, leading to
an intrinsic difficulty in the interpretation of the results of the algorithms
without any additional non-topological information. In this paper we face this
problem by introducing two quantitative definitions of community and by showing
how they are implemented in practice in the existing algorithms. In this way
the algorithms for the identification of the community structure become fully
self-contained. Furthermore, we propose a new local algorithm to detect
communities which outperforms the existing algorithms with respect to the
computational cost, keeping the same level of reliability. The new algorithm is
tested on artificial and real-world graphs. In particular we show the
application of the new algorithm to a network of scientific collaborations,
which, for its size, can not be attacked with the usual methods. This new class
of local algorithms could open the way to applications to large-scale
technological and biological applications.Comment: Revtex, final form, 14 pages, 6 figure
Laminar-flow flight experiments
The flight testing conducted over the past 10 years in the NASA laminar-flow control (LFC) will be reviewed. The LFC program was directed towards the most challenging technology application, the high supersonic speed transport. To place these recent experiences in perspective, earlier important flight tests will first be reviewed to recall the lessons learned at that time
Interferometric Observations of V838 Monocerotis
We have used long-baseline near-IR interferometry to resolve the peculiar
eruptive variable V838 Mon and to provide the first direct measurement of its
angular size. Assuming a uniform disk model for the emission we derive an
apparent angular diameter at the time of observations (November-December 2004)
of milli-arcseconds. For a nominal distance of kpc,
this implies a linear radius of . However, the data are
somewhat better fit by elliptical disk or binary component models, and we
suggest that the emission may be strongly affected by ejecta from the outburst.Comment: 12 pages, 1 two-part encapsulated postscript figure. Accepted by
ApJL. Added a table of observation
Visual phosphene perception modulated by subthreshold crossmodal sensory stimulation (vol 27, pg 4178, 2007)
Studies of concentration and temperature dependencies of precipitation kinetics in iron-copper alloys using kinetic monte carlo and stochastic statistical simulations
The earlier-developed ab initio model and the kinetic Monte Carlo method
(KMCM) are used to simulate precipitation in a number of iron-copper alloys
with different copper concentrations x and temperatures T. The same simulations
are also made using the improved version of the earlier-suggested stochastic
statistical method (SSM). The results obtained enable us to make a number of
general conclusions about the dependencies of the decomposition kinetics in
Fe-Cu alloys on x and T. We also show that the SSM describes the precipitation
kinetics in a fair agreement with the KMCM, and employing the SSM in
conjunction with the KMCM enables us to extend the KMC simulations to the
longer evolution times. The results of simulations seem to agree with available
experimental data for Fe-Cu alloys within statistical errors of simulations and
the scatter of experimental results. Comparison of results of simulations to
experiments for some multicomponent Fe-Cu-based alloys enables us to make
certain conclusions about the influence of alloying elements in these alloys on
the precipitation kinetics at different stages of evolution.Comment: 18 pages, 17 postscript figures, LaTe
Electromagnetic Dipole Strength in Transitional Nuclei
Electromagnetic dipole absorption cross-sections of transitional nuclei with
large-amplitude shape fluctuations are calculated in a microscopic way by
introducing the concept of Instantaneous Shape Sampling. The concept bases on
the slow shape dynamics as compared to the fast dipole vibrations. The
elctromagnetic dipole strength is calculated by means of RPA for the
instantaneous shapes, the probability of which is obtained by means of IBA.
Very good agreement with the experimental absorption cross sections near the
nucleon emission threshold is obtained.Comment: 4 pages, 4 figure
Strain-driven elastic and orbital-ordering effects on thickness-dependent properties of manganite thin films
We report on the structural and magnetic characterization of (110) and (001)
La2/3Ca1/3MnO3 (LCMO) epitaxial thin films simultaneously grown on (110) and
(001)SrTiO3 substrates, with thicknesses t varying between 8 nm and 150 nm. It
is found that while the in-plane interplanar distances of the (001) films are
strongly clamped to those of the substrate and the films remain strained up to
well above t=100 nm, the (110) films relax much earlier. Accurate determination
of the in-plane and out-of-plane interplanar distances has allowed concluding
that in all cases the unit cell volume of the manganite reduces gradually when
increasing thickness, approaching the bulk value. It is observed that the
magnetic properties (Curie temperature and saturation magnetization) of the
(110) films are significantly improved compared to those of (001) films. These
observations, combined with 55Mn-nuclear magnetic resonance data and X-ray
photoemission spectroscopy, signal that the depression of the magnetic
properties of the more strained (001)LCMO films is not caused by an elastic
deformation of the perovskite lattice but rather due to the electronic and
chemical phase separation caused by the substrate-induced strain. On the
contrary, the thickness dependence of the magnetic properties of the less
strained (110)LCMO films are simply described by the elastic deformation of the
manganite lattice. We will argue that the different behavior of (001) and
(110)LCMO films is a consequence of the dissimilar electronic structure of
these interfaces.Comment: 16 pages, 15 figure
- …