Geological notes and local details for 1:10000 sheets TQ01NW, NE, SW and SE: Pulborough and Storrington: part of 1:50000 Sheet 317 (Chichester)

This report describes the geology of 1:10 000 geological sheets TQ 01 NW, NE SW and SE, which cover the country around Pulborough and Storrington, in Sussex. The area falls within the 1:50 000 Chichester (317) Geological Sheet. It was first surveyed on the 'one-inch' scale by H.W. Bristow and F. Drew as part of Old Series One-inch Geological Sheet 9, published in 1864. The descriptive memoir covering this and adjacent sheets was compiled by W. Topley and published in 1875. The area was resurveyed on the 'six-inch scale by Clement Reid in 1890 and G.W. Lamplugh in 1899-1900~and formed part of the New Series 'One-inch' Geological Sheet 317, published in 1902. A descriptive memoir by Clement Reid appeared in 1903

Assessment of surface currents measured with high-frequency phased-array radars in two regions of complex circulation

Surface velocity data from two WERA high frequency (HF) ocean radar systems, deployed as part of the Australian Integrated Marine Observing System (IMOS), are compared with near surface currents obtained from drifters and ADCPs (acoustic Doppler current profiler). We evaluate data from two contrasting locations in the first detailed evaluation of the IMOS HF radar surface velocities. HF radar measurements are generally robust but demand quality-control procedures to eliminate obvious errors and outliers that appear temporarily or systematically in the data. A number of different quality control procedures and filters are applied and assessed including Taylor diagrams, Hampel and Savitzky-Golay filters. In addition the need for and effect of averaging are discussed. The radar measurements of surface current agreed better with the near-surface drifter currents than with the subsurface ADCP currents. Nonetheless the ADCP comparisons are consistent with those previously reported in other regions. The value of the Taylor Diagram for comparing different surface current data sets and processing approaches is demonstrated. Noise levels in the radar current spectra are used to estimate the error in the measurements and in some cases, these errors were found to approach the precision of the radar estimates. Our results give guidance on the most useful temporal sampling resolution. In particular we show that, at these sites and these operating frequencies, using 10-minute sampling without further averaging does not provide additional information because the higher frequencies are dominated by noise. Averaging the radials over 30-minutes may be sufficient for many applications

Assessment of surface currents measured with high-frequency phased-array radars in two regions of complex circulation

Surface velocity data from two WERA high frequency (HF) ocean radar systems, deployed as part of the Australian Integrated Marine Observing System (IMOS), are compared with near surface currents obtained from drifters and ADCPs (acoustic Doppler current profiler). We evaluate data from two contrasting locations in the first detailed evaluation of the IMOS HF radar surface velocities. HF radar measurements are generally robust but demand quality-control procedures to eliminate obvious errors and outliers that appear temporarily or systematically in the data. A number of different quality control procedures and filters are applied and assessed including Taylor diagrams, Hampel and Savitzky-Golay filters. In addition the need for and effect of averaging are discussed. The radar measurements of surface current agreed better with the near-surface drifter currents than with the subsurface ADCP currents. Nonetheless the ADCP comparisons are consistent with those previously reported in other regions. The value of the Taylor Diagram for comparing different surface current data sets and processing approaches is demonstrated. Noise levels in the radar current spectra are used to estimate the error in the measurements and in some cases, these errors were found to approach the precision of the radar estimates. Our results give guidance on the most useful temporal sampling resolution. In particular we show that, at these sites and these operating frequencies, using 10-minute sampling without further averaging does not provide additional information because the higher frequencies are dominated by noise. Averaging the radials over 30-minutes may be sufficient for many applications

The Kuiper Belt and Other Debris Disks

We discuss the current knowledge of the Solar system, focusing on bodies in the outer regions, on the information they provide concerning Solar system formation, and on the possible relationships that may exist between our system and the debris disks of other stars. Beyond the domains of the Terrestrial and giant planets, the comets in the Kuiper belt and the Oort cloud preserve some of our most pristine materials. The Kuiper belt, in particular, is a collisional dust source and a scientific bridge to the dusty "debris disks" observed around many nearby main-sequence stars. Study of the Solar system provides a level of detail that we cannot discern in the distant disks while observations of the disks may help to set the Solar system in proper context.Comment: 50 pages, 25 Figures. To appear in conference proceedings book "Astrophysics in the Next Decade

A measurement of the tau mass and the first CPT test with tau leptons

We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV using tau pairs from Z0 decays. To test CPT invariance we compare the masses of the positively and negatively charged tau leptons. The relative mass difference is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.

Measurement of the Michel Parameters in Leptonic Tau Decays

The Michel parameters of the leptonic tau decays are measured using the OPAL detector at LEP. The Michel parameters are extracted from the energy spectra of the charged decay leptons and from their energy-energy correlations. A new method involving a global likelihood fit of Monte Carlo generated events with complete detector simulation and background treatment has been applied to the data recorded at center-of-mass energies close to sqrt(s) = M(Z) corresponding to an integrated luminosity of 155 pb-1 during the years 1990 to 1995. If e-mu universality is assumed and inferring the tau polarization from neutral current data, the measured Michel parameters are extracted. Limits on non-standard coupling constants and on the masses of new gauge bosons are obtained. The results are in agreement with the V-A prediction of the Standard Model.Comment: 32 pages, LaTeX, 9 eps figures included, submitted to the European Physical Journal

A Measurement of the Product Branching Ratio f(b->Lambda_b).BR(Lambda_b->Lambda X) in Z0 Decays

The product branching ratio, f(b->Lambda_b).BR(Lambda_b->Lambda X), where Lambda_b denotes any weakly-decaying b-baryon, has been measured using the OPAL detector at LEP. Lambda_b are selected by the presence of energetic Lambda particles in bottom events tagged by the presence of displaced secondary vertices. A fit to the momenta of the Lambda particles separates signal from B meson and fragmentation backgrounds. The measured product branching ratio is f(b->Lambda_b).BR(Lambda_b->Lambda X) = (2.67+-0.38(stat)+0.67-0.60(sys))% Combined with a previous OPAL measurement, one obtains f(b->Lambda_b).BR(Lambda_b->Lambda X) = (3.50+-0.32(stat)+-0.35(sys))%.Comment: 16 pages, LaTeX, 3 eps figs included, submitted to the European Physical Journal

WW Production Cross Section and W Branching Fractions in e+e- Collisions at 189 GeV

From a data sample of 183 pb^-1 recorded at a center-of-mass energy of roots = 189 GeV with the OPAL detector at LEP, 3068 W-pair candidate events are selected. Assuming Standard Model W boson decay branching fractions, the W-pair production cross section is measured to be sigmaWW = 16.30 +- 0.34(stat.) +- 0.18(syst.) pb. When combined with previous OPAL measurements, the W boson branching fraction to hadrons is determined to be 68.32 +- 0.61(stat.) +- 0.28(syst.) % assuming lepton universality. These results are consistent with Standard Model expectations.Comment: 22 pages, 5 figures, submitted to Phys. Lett.

First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters

'To live and die [for] Dixie': Irish civilians and the Confederate States of America

Around 20,000 Irishmen served in the Confederate army in the Civil War. As a result, they left behind, in various Southern towns and cities, large numbers of friends, family, and community leaders. As with native-born Confederates, Irish civilian support was crucial to Irish participation in the Confederate military effort. Also, Irish civilians served in various supporting roles: in factories and hospitals, on railroads and diplomatic missions, and as boosters for the cause. They also, however, suffered in bombardments, sieges, and the blockade. Usually poorer than their native neighbours, they could not afford to become 'refugees' and move away from the centres of conflict. This essay, based on research from manuscript collections, contemporary newspapers, British Consular records, and Federal military records, will examine the role of Irish civilians in the Confederacy, and assess the role this activity had on their integration into Southern communities. It will also look at Irish civilians in the defeat of the Confederacy, particularly when they came under Union occupation. Initial research shows that Irish civilians were not as upset as other whites in the South about Union victory. They welcomed a return to normalcy, and often 'collaborated' with Union authorities. Also, Irish desertion rates in the Confederate army were particularly high, and I will attempt to gauge whether Irish civilians played a role in this. All of the research in this paper will thus be put in the context of the Drew Gilpin Faust/Gary Gallagher debate on the influence of the Confederate homefront on military performance. By studying the Irish civilian experience one can assess how strong the Confederate national experiment was. Was it a nation without a nationalism