Synthetic Amorphous Silicon Dioxide (NM-200, NM-201, NM-202, NM-203, NM-204): Characterisation and Physico-Chemical Properties

The European Commission's Joint Research Centre (JRC) provides scientific support to European Union policy including nanotechnology. Within this context, the JRC launched, in February 2011, a repository for Representative Test Materials (RTMs), based on preparatory work started in 2008. It supports both EU and international research projects, and especially the OECD Working Party on Manufactured Nanomaterials (WPMN). The WPMN leads an exploratory testing programme "Testing a Representative set of Manufactured Nanomaterials" for the development and collection of data on characterisation, toxicological and ecotoxicological properties, as well as risk assessment and safety evaluation of nanomaterials. The purpose is to understand the applicability of the OECD Test Guidelines for the testing of nanomaterials as well as end-points relevant for such materials. The Repository responds to a need for nanosafety research purposes: availability of nanomaterial from a single production batch to enhance the comparability of results between different research laboratories and projects. The availability of representative nanomaterials to the international scientific community furthermore enhances and enables development of safe materials and products. The present report presents the physico-chemical characterisation of the synthetic amorphous silicon dioxide (SiO2, SAS) from the JRC repository: NM-200, NM-201, NM-202, NM-203 and NM-204. NM-200 was selected as principal material for the OECD test programme "Testing a representative set of manufactured nanomaterials". NM-200, NM-201 and NM-204 (precipitated SAS) are produced via the precipitation process, whereas NM-202 and NM-203 (fumed or pyrogenic SAS) are produced via a high temperature process. Each of these NMs originates from one respective batch of commercially manufactured SAS. They are nanostructured, i.e. they consist of aggregated primary particles. The SAS NMs may be used as a representative material in the measurement and testing with regard to hazard identification, risk and exposure assessment studies. The results for more than 15 endpoints are addressed in the present report, including physical-chemical properties, such as size and size distribution, crystallite size and electron microscopy images. Sample and test item preparation procedures are addressed. The results are based on studies by several European laboratories participating to the NANOGENOTOX Joint Action, as well as the JRC.JRC.I.4-Nanobioscience

Multi-walled Carbon Nanotubes, NM-400, NM-401, NM-402, NM-403: Characterisation and Physico-Chemical Properties

In 2011 the JRC launched a Repository for Representative Test Materials that supports both EU and international research projects, and especially the OECD Working Party on Manufactured Nanomaterials' (WPMN) exploratory testing programme "Testing a Representative set of Manufactured Nanomaterials" for the development and collection of data on characterisation, toxicological and ecotoxicological properties, as well as risk assessment and safety evaluation of nanomaterials. The JRC Repository responds to a need for availability of nanomaterial from a single production batch to enhance the comparability of results between different research laboratories and projects. The present report presents the physico-chemical characterisation of the multi-walled carbon nanotubes (MWCNT) from the JRC Repository: NM-400, NM-401, NM-402 and NM-403. NM-400 was selected as principal material for the OECD WPMN testing programme. They are produced by catalytic chemical vapour deposition. Each of these NMs originates from one respective batch of commercially manufactured MWCNT. They are nanostructured, i.e. they consist of more than one graphene layer stacked on each other and rolled together as concentric tubes. The MWCNT NMs may be used as a representative material in the measurement and testing with regard to hazard identification, risk and exposure assessment studies. The results are based on studies by several European laboratories participating to the NANOGENOTOX Joint Action.JRC.I.4-Nanobioscience

Titanium Dioxide, NM-100, NM-101, NM-102, NM-103, NM-104, NM-105: Characterisation and Physico-Chemical Properties

The European Commission's Joint Research Centre (JRC) provides scientific support to European Union policy including nanotechnology. Within this context, the JRC launched, in February 2011, a repository for Representative Test Materials (RTMs), based on preparatory work started in 2008. It supports both EU and international research projects, and especially the OECD Working Party on Manufactured Nanomaterials (WPMN). The WPMN leads an exploratory testing programme "Testing a Representative set of Manufactured Nanomaterials" for the development and collection of data on characterisation, toxicological and ecotoxicological properties, as well as risk assessment and safety evaluation of nanomaterials. The purpose is to understand the applicability of the OECD Test Guidelines for the testing of nanomaterials as well as end-points relevant for such materials. The Repository responds to a need for nanosafety research purposes: availability of nanomaterial from a single production batch to enhance the comparability of results between different research laboratories and projects. The availability of representative nanomaterials to the international scientific community furthermore enhances and enables development of safe materials and products. The present report presents the physico-chemical characterisation of the Titanium dioxide series from the JRC repository: NM-100, NM-101, NM-102, NM-103, NM-104 and NM-105. NM-105 was selected as principal material for the OECD test programme "Testing a representative set of manufactured nanomaterials". NM-100 is included in the series as a bulk comparator. Each of these NMs originates from one batch of commercially manufactured TiO2. The TiO2 NMs may be used as representative material in the measurement and testing with regard to hazard identification, risk and exposure assessment studies. The results for more than 15 endpoints are addressed in the present report, including physico-chemical properties, such as size and size distribution, crystallite size and electron microscopy images. Sample and test item preparation procedures are addressed. The results are based on studies by several European laboratories participating to the NANOGENOTOX Joint Action, as well as by the JRC.JRC.I.4-Nanobioscience

A systematic evaluation of Flow Field Flow Fractionation and single-particle ICP-MS to obtain the size distribution of organo-mineral iron oxyhydroxide colloids

Colloidal iron(III)oxyhydroxides (FeOx)are important reactive adsorbents in nature. This study was set up to determine the size of environmentally relevant FeOx colloids with new methods, i.e. Flow Field Flow Fractionation (FlFFF-UV-ICP-MS)and single-particle ICP-MS/MS (sp-ICP-MS)and to compare these with standard approaches, i.e. dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), microscopy (TEM), membrane filtration, centrifugation and dialysis. Seven synthetic nano- and submicron FeOx with different mineralogy and coating were prepared and two soil solutions were included. The FlFFF was optimized for Fe recovery, yielding 70–90%. The FlFFF determines particle size with high resolution in a 1 mM NH 4 HCO 3 (pH 8.3)background and can detect Fe-NOM complexes 4 HCO 3 )and it has acceptable element recoveries. </p

Effect of leaching and aging on the bioavailability of lead to the springtail Folsomia candida

Because it is unclear if leaching can account for differences in metal bioavailability observed between metal-spiked soils and historically contaminated field soils, we simultaneously assessed Pb toxicity to the springtail Folsomia candida in three transects of Pb-contaminated soils and in leached and unleached soils spiked at similar total Pb concentrations. Total Pb concentrations of 3,877 mg/kg dry weight and higher always caused significant effects on F. candida reproduction in the spiked soils. In the transects, only the soil with the highest Pb concentration of 14,436 mg/kg dry weight significantly affected reproduction. When expressed as pore-water concentrations, reproduction was never significantly affected at Pb concentrations of 0.539 mg/L, whereas reproduction was always significantly affected at Pb concentrations of 0.678 mg/L and higher, independent of the soil treatment. These results indicate that pore-water Pb concentrations can explain, at least in part, the observed differences in the toxicity data expressed as total Pb concentrations. Leaching after the spiking procedure only caused small differences in Pb toxicity and, therefore, cannot account for toxicity differences between laboratory-spiked soils and historically contaminated field soils

Selenium content of Belgian cultivated soils and its uptake by field crops and vegetables

&lt;p&gt;A series of 695 food crops were collected on 539 soils throughout Belgium. All samples were collected on commercial production fields, omitting private gardens. All crops were analyzed for their selenium (Se) concentration. The soils represent different soil types occurring in Belgium, with soil textures ranging from sand to silt loam, and including a few clay soils. They were analyzed for Se concentration, organic carbon content, cation exchange capacity and extractable sulphur (S) concentration. The Se concentrations in the soils were low (range 0.14-0.70 mg kg(-1) dw), but increasing soil Se concentrations were observed with increasing clay content. Stepwise multiple regressions were applied to determine relations between Se concentrations in crops and soil characteristics. Among field crops, wheat is the most important accumulator of selenium but the concentration remains rather low on the Belgian low Se-soils. Based on dry weight, leafy vegetables contain more Se than wheat. The soil is the most important source of Se and the element is transported with the water stream to the leaves, where it is accumulated. Vegetables rich in S, e.g. some Brassica and Allium species, have a higher capacity to accumulate Se as it can replace S in the proteins, although this accumulation is still limited at low soil Se concentrations. In loamy soils, weak correlations were found between the soil Se concentration and its concentration in wheat and potato. The uptake of Se increased with increasing pH. The Se concentrations in Belgian soils are far too low to generate a driving force on Se uptake. General climatic conditions such as temperature, air humidity and soil moisture are also important for the transfer of Se within the plant, and plant linked factors such as cultivar, growth stage and edible part are important as well, although their influence remains limited at low soil Se concentrations.&lt;/p&gt;</p

Polyphosphates and fulvates enhanve environmental stability of PO4-bearing colloidal iron oxyhydroxides

Iron oxyhydroxide nanoparticles (Fe-NPs) are natural vectors of phosphate (PO4) in the environment. Their mobility is determined by colloidal stability, which is affected by surface composition. This might be manipulated in engineered NPs for environmental or agricultural applications. Here, the stability of PO4-Fe-NPs (HFO/goethite) was determined across contrasting environmental conditions (pH, Ca concentration) and by using fulvates (FA) and polyphosphates (poly-P’s) as coatings. The PO4-Fe-NPs are unstable at Ca concentrations above 0.1 mM. Addition of FA and some poly-P’s significantly improved stability. Zeta potential explained colloidal stability across treatments; surface charge was calculated with surface complexation models and explained for phytic acid (PA) and hexametaphosphate (HMP) by a partial (1–4 of the 6 PO4 units) adsorption to the surface, while the remaining PO4 units stayed in solution. This study suggests that Ca concentration mainly affects the mobility of natural or engineered PO4-Fe-NPs and that HMP is a promising agent for increasing colloidal stability.status: publishe

Brominated flame retardants in Belgian home-produced eggs: levels and contamination sources

&lt;p&gt;The extent and the sources of contamination with brominated flame retardants (BFRs), such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD), in home-produced eggs from free-foraging chicken of Belgian private owners were investigated. Various factors, such as seasonal variability, exposure of chickens through diet (kitchen waste) and soil, and elimination of BFRs through eggs and faeces were assessed. PBDEs were more important than HBCD in terms of concentrations and detection frequency. Concentrations of PBDEs and HBCD in Belgian home-produced eggs were relatively low and comparable with reported levels from other European countries and the US. The concentrations of PBDEs (sum of 13 congeners, including BDE 209) ranged between not detected and 32 ng/g lipid weight (lw), with medians of 3.0 and &amp;lt;2.0 ng/g lw for the autumn 2006 and spring 2007 campaigns, respectively. When present, BDE 209 was the major PBDE congener (45% of sum PBDEs). When BDE 209 was not detected, the PBDE profile was composed of PentaBDE (BDE 99 and BDE 47), with, in some cases, higher contribution of OctaBDE (BDE 183 and BDE 153). HBCD was also detected (&amp;lt;0.4 and 2.9 ng/g lw for the autumn 2006 and spring 2007 campaigns, respectively), but at lower detection frequency. The highest HBCD value was 62 ng/g lw. The similarity between profiles and seasonal variations in the concentrations of BFRs in soil and eggs indicate that soil is an important source, but not the sole source, for eggs laid by free-foraging chicken. The contamination of eggs with PBDEs and HBCD appears to be of low concern for public health and the contribution of eggs to the total daily intake of PBDEs appears to be limited (10% for chicken owners and 5% for the average Belgian consumer)&lt;/p&gt;</p

Transfer of soil contaminants to home-produced eggs and preventive measures to reduce contamination

&lt;p&gt;Uptake studies have shown that chickens foraging on soils contaminated with environmental pollutants accumulate these compounds into their eggs. Home-produced eggs thereby show higher contamination levels than commercially produced eggs. It was the aim of this study to identify the major source of two environmental pollutants in home-produced eggs, i.e. dioxins and lead, to formulate preventive measures to reduce the contamination levels of such eggs, and to assess the feasibility of the formulated measures in terms of the perception and behavior of private egg producers towards such measures. The major source of dioxins and lead in eggs, i.e. the soil, was identified by transfer calculations of the pollutants from the feed and soil towards eggs. Preventive measures to reduce soil intake or geophagy and hence egg contamination levels, were formulated and their feasibility evaluated through interviews with private chicken owners. The results show that a paved surface inside the henhouse, an indoor feeding place and providing a sufficient surface area per chicken were considered the most appropriate in terms of feasibility and willingness to apply the measures by the private chicken owners. To enhance the effect of the measures, a combination of measures supported and promoted at policy level is considered as a good strategy to reduce contamination levels in home-produced eggs.&lt;/p&gt;</p