210 research outputs found

    Modelling and monitoring of Aquifer Thermal Energy Storage : impacts of soil heterogeneity, thermal interference and bioremediation

    Get PDF
    Modelling and monitoring of Aquifer Thermal Energy Storage Impacts of heterogeneity, thermal interference and bioremediation Wijbrand Sommer PhD thesis, Wageningen University, Wageningen, NL (2015) ISBN 978-94-6257-294-2 Abstract Aquifer thermal energy storage (ATES) is applied world-wide to provide heating and cooling to buildings. Application of ATES, instead of traditional heating and cooling installations, reduces primary energy consumption and related CO2 emissions. Intensified use of the subsurface for thermal applications requires more accurate methods to measure and predict the development of thermal plumes in the subsurface related to thermal interference between systems and address issues concerning subsurface urban planning and wide spread presence of contaminants in urban groundwater systems. In this thesis, subsurface heat transport in ATES and the associated influence on storage performance for thermal energy was assessed. Detailed monitoring of subsurface temperature development around the wells of an existing system was achieved by a unique application of Distributed Temperature Sensing (DTS) using glass fibre optical cables. The measurements reveal unequal distribution of flow rate over different parts of the well screen and preferential flow due to aquifer heterogeneity. Heat transport modelling shows that heterogeneity causes preferential flow paths that can affect thermal interference between systems, mainly depending on well-to-well distance and hydrogeological conditions. At present, design rules are applied in such way that all negative interference is avoided. However, this limits the number of ATES systems that can be realized in a specific area, especially as these systems generally use only 60% of their permitted capacity. To optimize the use of available aquifer volume, the amount of thermal interference that is acceptable from an economical and environmental perspective was studied for different zonation patterns and well-to-well distances. Selecting the hydrogeological conditions of Amsterdam, the Netherlands, as a case study, this method shows that it is cost-effective to allow a limited amount of thermal interference, such that 30–40% more energy can be provided than compared to the case in which all negative thermal interference is avoided. Because many urbanized areas deal with contaminated soil and groundwater, ambitions to increase the number of ATES systems are confronted with the presence of groundwater contaminants. This is of concern, because groundwater movement induced by the ATES system can result in increased mobility and spreading of these contaminants. However, the combination between ATES and soil and groundwater remediation could be a promising integrated technique, both for improving groundwater quality and development of ATES. Opportunities to use ATES as a continuous biostimulation tool for enhanced reductive dechlorination (ERD) have been explored with a reactive transport model.</p

    A low power photoemission source for electrons on liquid helium

    Full text link
    Electrons on the surface of liquid helium are a widely studied system that may also provide a promising method to implement a quantum computer. One experimental challenge in these studies is to generate electrons on the helium surface in a reliable manner without heating the cryo-system. An electron source relying on photoemission from a zinc film has been previously described using a high power continuous light source that heated the low temperature system. This work has been reproduced more compactly by using a low power pulsed lamp that avoids any heating. About 5e3 electrons are collected on 1 cm^2 of helium surface for every pulse of light. A time-resolved experiment suggests that electrons are either emitted over or tunnel through the 1eV barrier formed by the thin superfluid helium film on the zinc surface. No evidence of trapping or bubble formation is seen.Comment: 9 pages, 3 figures, submitted to J. Low Temp. Phy

    Magnetic trapping of ultracold neutrons

    Full text link
    Three-dimensional magnetic confinement of neutrons is reported. Neutrons are loaded into an Ioffe-type superconducting magnetic trap through inelastic scattering of cold neutrons with 4He. Scattered neutrons with sufficiently low energy and in the appropriate spin state are confined by the magnetic field until they decay. The electron resulting from neutron decay produces scintillations in the liquid helium bath that results in a pulse of extreme ultraviolet light. This light is frequency downconverted to the visible and detected. Results are presented in which 500 +/- 155 neutrons are magnetically trapped in each loading cycle, consistent with theoretical predictions. The lifetime of the observed signal, 660 s +290/-170 s, is consistent with the neutron beta-decay lifetime.Comment: 17 pages, 18 figures, accepted for publication in Physical Review

    Heavy quarkonium: progress, puzzles, and opportunities

    Get PDF
    A golden age for heavy quarkonium physics dawned a decade ago, initiated by the confluence of exciting advances in quantum chromodynamics (QCD) and an explosion of related experimental activity. The early years of this period were chronicled in the Quarkonium Working Group (QWG) CERN Yellow Report (YR) in 2004, which presented a comprehensive review of the status of the field at that time and provided specific recommendations for further progress. However, the broad spectrum of subsequent breakthroughs, surprises, and continuing puzzles could only be partially anticipated. Since the release of the YR, the BESII program concluded only to give birth to BESIII; the BB-factories and CLEO-c flourished; quarkonium production and polarization measurements at HERA and the Tevatron matured; and heavy-ion collisions at RHIC have opened a window on the deconfinement regime. All these experiments leave legacies of quality, precision, and unsolved mysteries for quarkonium physics, and therefore beg for continuing investigations. The plethora of newly-found quarkonium-like states unleashed a flood of theoretical investigations into new forms of matter such as quark-gluon hybrids, mesonic molecules, and tetraquarks. Measurements of the spectroscopy, decays, production, and in-medium behavior of c\bar{c}, b\bar{b}, and b\bar{c} bound states have been shown to validate some theoretical approaches to QCD and highlight lack of quantitative success for others. The intriguing details of quarkonium suppression in heavy-ion collisions that have emerged from RHIC have elevated the importance of separating hot- and cold-nuclear-matter effects in quark-gluon plasma studies. This review systematically addresses all these matters and concludes by prioritizing directions for ongoing and future efforts.Comment: 182 pages, 112 figures. Editors: N. Brambilla, S. Eidelman, B. K. Heltsley, R. Vogt. Section Coordinators: G. T. Bodwin, E. Eichten, A. D. Frawley, A. B. Meyer, R. E. Mitchell, V. Papadimitriou, P. Petreczky, A. A. Petrov, P. Robbe, A. Vair

    Measurement of the tau lepton lifetime

    Get PDF

    Limit on Bs0B^0_s oscillation using a jet charge method

    Get PDF
    A lower limit is set on the B_{s}^{0} meson oscillation parameter \Delta m_{s} using data collected from 1991 to 1994 by the ALEPH detector. Events with a high transverse momentum lepton and a reconstructed secondary vertex are used. The high transverse momentum leptons are produced mainly by b hadron decays, and the sign of the lepton indicates the particle/antiparticle final state in decays of neutral B mesons. The initial state is determined by a jet charge technique using both sides of the event. A maximum likelihood method is used to set a lower limit of \, \Delta m_{s}. The 95\% confidence level lower limit on \Delta m_s ranges between 5.2 and 6.5(\hbar/c^{2})~ps^{-1} when the fraction of b quarks from Z^0 decays that form B_{s}^{0} mesons is varied from 8\% to 16\%. Assuming that the B_{s}^{0} fraction is 12\%, the lower limit would be \Delta m_{s} 6.1(\hbar/c^{2})~ps^{-1} at 95\% confidence level. For x_s = \Delta m_s \, \tau_{B_s}, this limit also gives x_s 8.8 using the B_{s}^{0} lifetime of \tau_{B_s} = 1.55 \pm 0.11~ps and shifting the central value of \tau_{B_s} down by 1\sigma

    Measurement of the Bs0^0_s lifetime and production rate with Dsl+^-_s l^+ combinations in Z decays

    Get PDF
    The lifetime of the \bs meson is measured in approximately 3 million hadronic Z decays accumulated using the ALEPH detector at LEP from 1991 to 1994. Seven different \ds decay modes were reconstructed and combined with an opposite sign lepton as evidence of semileptonic \bs decays. Two hundred and eight \dsl candidates satisfy selection criteria designed to ensure precise proper time reconstruction and yield a measured \bs lifetime of \mbox{\result .} Using a larger, less constrained sample of events, the product branching ratio is measured to be \mbox{\pbrresult

    Measurement of the tau lepton lifetime

    Get PDF

    Measurement of the tau lepton lifetime

    No full text
    corecore