1,872 research outputs found
Finite element analysis using NASTRAN applied to helicopter transmission vibration/noise reduction
A finite element NASTRAN model of the complete forward rotor transmission housing for the Boeing Vertol CH-47 helicopter was developed and applied to reduce transmission vibration/noise at its source. In addition to a description of the model, a technique for vibration/noise prediction and reduction is outlined. Also included are the dynamic response as predicted by NASTRAN, test data, the use of strain energy methods to optimize the housing for minimum vibration/noise, and determination of design modifications which will be manufactured and tested. The techniques presented are not restricted to helicopters but are applicable to any power transmission system. The transmission housing model developed can be used further to evaluate static and dynamic stresses, thermal distortions, deflections and load paths, fail-safety/vulnerability, and composite materials
Preliminary investigations into human fall verification in static images using the NAO humanoid robot
Non-overlapping dual camera fall detection using the NAO humanoid robot
With an aging population and a greater desire for independence, the dangers of falling incidents in the elderly have become particularly pronounced. In light of this, several technologies have been developed with the aim of preventing or monitoring falls. Failing to strike the balance between several factors including reliability, complexity and invasion of privacy has seen prohibitive in the uptake of these systems. Some systems rely on cameras being mounted in all rooms of a user's home while others require being worn 24 hours a day. This paper explores a system using a humanoid NAO robot with dual vertically mounted cameras to perform the task of fall detection
Did a change in Nature journalsâ editorial policy for life sciences research improve reporting?
Kneeling ability after total knee replacement
Kneeling ability is consistently the poorest patient-rated outcome after total knee replacement (TKR), with 60â80% of patients reporting difficulty kneeling or an inability to kneel.
Difficulty kneeling impacts on many activities and areas of life, including activities of daily living, self-care, leisure and social activities, religious activities, employment and getting up after a fall. Given the wide range of activities that involve kneeling, and the expectation that this will be improved with surgery, problems kneeling after TKR are a source of dissatisfaction and disappointment for many patients.
Research has found that there is no association between range of motion and self-reported kneeling ability. More research is needed to understand if and how surgical factors contribute to difficulty kneeling after TKR.
Discrepancies between patientsâ self-reported ability to kneel and observed ability suggests that patients can kneel but elect not to. Reasons for this are multifactorial, including knee pain/discomfort, numbness, fear of harming the prosthesis, co-morbidities and recommendations from health professionals. There is currently no evidence that there is any clinical reason why patients should not kneel on their replaced knee, and reasons for not kneeling could be addressed through education and rehabilitation.
There has been little research to evaluate the provision of healthcare services and interventions for patients who find kneeling problematic after TKR. Increased clinical awareness of this poor outcome and research to inform the provision of services is needed to improtzve patient care and allow patients to return to this important activity
Developing Effective Intelligent Assistance for the Powered Wheelchair User
This research is working towards developing a pre-production prototype system which can provide a low-cost real-time adjustable and adaptable driving assistance system for powered wheelchair users. Currently we are seeking to obtain information from user joystick input and their driving quality to identify symptoms and make adjustments to the driving assistance system
Use of extended and prepared reference objects in experimental Fourier transform X-ray holography
The use of one or more gold nanoballs as reference objects for Fourier
Transform holography (FTH) is analysed using experimental soft X-ray
diffraction from objects consisting of separated clusters of these balls. The
holograms are deconvoluted against ball reference objects to invert to images,
in combination with a Wiener filter to control noise. A resolution of ~30nm,
smaller than one ball, is obtained even if a large cluster of balls is used as
the reference, giving the best resolution yet obtained by X-ray FTH. Methods of
dealing with missing data due to a beamstop are discussed. Practical prepared
objects which satisfy the FTH condition are suggested, and methods of forming
them described.Comment: 7 pages, 2 figures, submitted to Applied Physics Letter
Thermal and Structural Analysis of Helicopter Transmission Housings Using NASTRAN
The application of NASTRAN to improve the design of helicopter transmission housings is described. A finite element model of the complete forward rotor transmission housing for the Boeing Vertol CH-47C helicopter was used to study thermal distortion and stress, stress and deflection due to static and dynamic loads, load paths, and design optimization by the control of structural energy distribution. The analytical results are correlated with test data and used to reduce weight and to improve strength, service life, failsafety, and reliability. The techniques presented, although applied herein to helicopter transmissions, are sufficiently general to be applicable to any power transmission system
- âŠ