Experimental Performance of Fiberglass Geogrid in Asphalt Pavements

This study performed an experimental investigation of asphalt concrete with and without fiberglass geogrid reinforcement, using specimens in the laboratory and in situ. A 100kN/m fiberglass geogrid was used. The results showed that with the fiberglass geogrid reinforcement, the flexural strength of the asphalt increased by 24.82%, deformation was significantly reduced, and the elastic modulus did not improve significantly. In addition, using the Hamburg Wheel Tracker test, the fiberglass geogrid reinforced asphalt samples had a 7.41%reduced rutting depth. Finally, two segments in situ were also tested showing that the flexural strength of asphalt concrete increased by 24.27% and the structural strength of the pavement increased by 25.24%. These results show that pavement structures are significantly improved when reinforced with fiberglass geogrid

Potential Usage of Rice Husk Ash-Cement Based Soil in Subbase and Base Courses in Road Construction

This paper presents an experimental study of rice husk ash-cement-based soil for layers in roadway construction. Rice husk ash (RHA) used in this study is a by-product of rice milling. In this work, twelve proportion mixes were used in this work with varying quantities of RHA (0-30%) and Portland cement blended amounts of 4, 6, 8%. The specimens were prepared by the Proctor mould method, conditioned at room temperature, and tested in soaked and unsoaked conditions. Specified curing periods of 7, 14, 28 days were applied for all types of specimens. Some engineering tests were carried out such as proctor compaction, unconfined compressive strength, splitting tensile strength, and the stiffness of stabilized soil. Test results indicated a general decrease in the maximum dry density (MDD) and increased optimum moisture content (OMC) with an increase in RHA content. Adding cement and RHA significantly improved the geotechnical properties of stabilized soils, including compressive strength, splitting tensile strength, elastic modulus. In addition, the combination of 80% soil and 20% RHA and 6% cement can be used as the optimum proportion which satisfied the grade 3 of soils stabilized with inorganic adhesive substances, chemical agents, or reinforced soil for road construction, as indicated in the current Vietnamese standard

Potential Usage of Rice Husk Ash-Cement Based Soil in Subbase and Base Courses in Road Construction

This paper presents an experimental study of rice husk ash-cement-based soil for layers in roadway construction. Rice husk ash (RHA) used in this study is a by-product of rice milling. In this work, twelve proportion mixes were used in this work with varying quantities of RHA (0-30%) and Portland cement blended amounts of 4, 6, 8%. The specimens were prepared by the Proctor mould method, conditioned at room temperature, and tested in soaked and unsoaked conditions. Specified curing periods of 7, 14, 28 days were applied for all types of specimens. Some engineering tests were carried out such as proctor compaction, unconfined compressive strength, splitting tensile strength, and the stiffness of stabilized soil. Test results indicated a general decrease in the maximum dry density (MDD) and increased optimum moisture content (OMC) with an increase in RHA content. Adding cement and RHA significantly improved the geotechnical properties of stabilized soils, including compressive strength, splitting tensile strength, elastic modulus. In addition, the combination of 80% soil and 20% RHA and 6% cement can be used as the optimum proportion which satisfied the grade 3 of soils stabilized with inorganic adhesive substances, chemical agents, or reinforced soil for road construction, as indicated in the current Vietnamese standard

MODIFICATION OF GRAPHENE OXIDE BY CURCUMIN AND APPLICATION IN POLYURETHANE COATING

Curcumin modified graphene oxide (GO-CR) was prepared using adsorption method and polyurethane (PU) coating containing 0.3 wt% GO-CR was prepared on carbon steel. Synthesized GO-CR was characterized by fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and zeta potential measurement. Corrosion protection property of polyurethane coating containing GO-CR was evaluated and compared with blank polyurethane coating and coating containing GO by electrochemical impedance spectroscopy. The results showed that GO-CR has layer structure like GO with lower crystallinity. In GO-CR structure curcumin was attached on GO surface. The presence of curcumin on GO-CR surface provided corrosion inhibition action for PU coating and also improved the dispersion of GO in PU coating

Factors Influencing Cost Overruns in Construction Projects of International Contractors in Vietnam

A construction project is a designed product made up of labors, materials, and installations in the project positioned on the ground and may include the underground and ground section, and the section in water or on the water surface. It is a civil, industrial, transport, agricultural and rural development, infrastructure, or some other. A key phase in the life cycle of these construction projects is the implementation when building products are made directly with workers, equipment, materials, and managers. If there is a lack of management experience, information, and problem-solving solutions to tackle the risks faced by contractors, especially foreign ones, will fail in controlling the project’s cost. This study was conducted with investigations, discussions, and evaluation of the factors that lead to cost overruns in the construction projects of international contractors in Vietnam. The principal component analysis (PCA) showed that those factors that influence cost overruns these construction projects fall into five general groups, including factors related to (i) the owners, (ii) the foreign contractors, (iii) the subcontractors and suppliers, (iv) state management, and (v) the project itself. Besides, the study proposes solutions to limit cost overruns in construction projects and improve the profitability of international contractors in Vietnam

Study on synthesis of carboxymethyl cellulose from pineapple leaf waste and its potential applications as a thickener

In this study, cellulose and hemicellulose were successfully extracted from pineapple leaf waste at yields of 58.8 and 16.1% by dried weight, respectively. Carboxymethyl cellulose (CMC) was synthesised from pineapple leaf cellulose by an esterification process using sodium hydroxide (NaOH) and monochloroacetic acid (MCA) with isopropanol as the supporting medium. Preparation of CMC was investigated by varying three free factors, namely, NaOH concentration, MCA dose, and cellulose size. The carboxymethylation process was optimised to produce CMC with differing degrees of substitution (DS). The highest DS of CMC (0.86) was obtained with 15% (w/v) NaOH solution, 0.6 g of MCA/g cellulose, and 50 μm cellulose. The obtained CMC were characterised by FTIR spectroscopy, SEM images and XRD diffractions. Moreover, the thickening performance of obtained CMC was also determined. The influence of the CMC’s molecular weight and degree of substitution on the viscosity of 1% (w/v) aqueous solution was tested. The experimental results suggest that the viscosity of the solution increases with increasing molecular weight and degree of substitution of CMC

A generic assay for whole-genome amplification and deep sequencing of enterovirus A71

Enterovirus A71 (EV-A71) has emerged as the most important cause of large outbreaks of severe and sometimes fatal hand, foot and mouth disease (HFMD) across the Asia-Pacific region. EV-A71 outbreaks have been associated with (sub)genogroup switches, sometimes accompanied by recombination events. Understanding EV-A71 population dynamics is therefore essential for understanding this emerging infection, and may provide pivotal information for vaccine development. Despite the public health burden of EV-A71, relatively few EV-A71 complete-genome sequences are available for analysis and from limited geographical localities. The availability of an efficient procedure for whole-genome sequencing would stimulate effort to generate more viral sequence data. Herein, we report for the first time the development of a next-generation sequencing based protocol for whole-genome sequencing of EV-A71 directly from clinical specimens. We were able to sequence viruses of subgenogroup C4 and B5, while RNA from culture materials of diverse EV-A71 subgenogroups belonging to both genogroup B and C was successfully amplified. The nature of intra-host genetic diversity was explored in 22 clinical samples, revealing 107 positions carrying minor variants (ranging from 0 to 15 variants per sample). Our analysis of EV-A71 strains sampled in 2013 showed that they all belonged to subgenogroup B5, representing the first report of this subgenogroup in Vietnam. In conclusion, we have successfully developed a high-throughput next-generation sequencing-based assay for whole-genome sequencing of EV-A71 from clinical samples

Spatiotemporal evolution of SARS-CoV-2 Alpha and Delta variants during large nationwide outbreak of COVID-19, Vietnam, 2021

We analyzed 1,303 SARS-CoV-2 whole-genome sequences from Vietnam, and found the Alpha and Delta variants were responsible for a large nationwide outbreak of COVID-19 in 2021. The Delta variant was confined to the AY.57 lineage and caused >1.7 million infections and >32,000 deaths. Viral transmission was strongly affected by nonpharmaceutical interventions

A Multi-Center Randomized Trial to Assess the Efficacy of Gatifloxacin versus Ciprofloxacin for the Treatment of Shigellosis in Vietnamese Children

The bacterial genus Shigella is the most common cause of dysentery (diarrhea containing blood and/or mucus) and the disease is common in developing countries with limitations in sanitation. Children are most at risk of infection and frequently require hospitalization and antimicrobial therapy. The WHO currently recommends the fluoroquinolone, ciprofloxacin, for the treatment of childhood Shigella infections. In recent years there has been a sharp increase in the number of organisms that exhibit resistance to nalidixic acid (an antimicrobial related to ciprofloxacin), corresponding with reduced susceptibility to ciprofloxacin. We hypothesized that infections with Shigella strains that demonstrate resistance to nalidixic acid may prevent effective treatment with ciprofloxacin. We performed a randomized controlled trial to compare 3 day ciprofloxacin therapy with 3 days of gatifloxacin, a newer generation fluoroquinolone with greater activity than ciprofloxacin. We measured treatment failure and time to the cessation of individual disease symptoms in 249 children with dysentery treated with gatifloxacin and 245 treated with ciprofloxacin. We could identify no significant differences in treatment failure between the two groups or in time to the cessation of individual symptoms. We conclude that, in Vietnam, ciprofloxacin and gatifloxacin are similarly effective for the treatment of acute dysentery

Safety and efficacy of fluoxetine on functional outcome after acute stroke (AFFINITY): a randomised, double-blind, placebo-controlled trial

Background Trials of fluoxetine for recovery after stroke report conflicting results. The Assessment oF FluoxetINe In sTroke recoverY (AFFINITY) trial aimed to show if daily oral fluoxetine for 6 months after stroke improves functional outcome in an ethnically diverse population. Methods AFFINITY was a randomised, parallel-group, double-blind, placebo-controlled trial done in 43 hospital stroke units in Australia (n=29), New Zealand (four), and Vietnam (ten). Eligible patients were adults (aged ≥18 years) with a clinical diagnosis of acute stroke in the previous 2–15 days, brain imaging consistent with ischaemic or haemorrhagic stroke, and a persisting neurological deficit that produced a modified Rankin Scale (mRS) score of 1 or more. Patients were randomly assigned 1:1 via a web-based system using a minimisation algorithm to once daily, oral fluoxetine 20 mg capsules or matching placebo for 6 months. Patients, carers, investigators, and outcome assessors were masked to the treatment allocation. The primary outcome was functional status, measured by the mRS, at 6 months. The primary analysis was an ordinal logistic regression of the mRS at 6 months, adjusted for minimisation variables. Primary and safety analyses were done according to the patient's treatment allocation. The trial is registered with the Australian New Zealand Clinical Trials Registry, ACTRN12611000774921. Findings Between Jan 11, 2013, and June 30, 2019, 1280 patients were recruited in Australia (n=532), New Zealand (n=42), and Vietnam (n=706), of whom 642 were randomly assigned to fluoxetine and 638 were randomly assigned to placebo. Mean duration of trial treatment was 167 days (SD 48·1). At 6 months, mRS data were available in 624 (97%) patients in the fluoxetine group and 632 (99%) in the placebo group. The distribution of mRS categories was similar in the fluoxetine and placebo groups (adjusted common odds ratio 0·94, 95% CI 0·76–1·15; p=0·53). Compared with patients in the placebo group, patients in the fluoxetine group had more falls (20 [3%] vs seven [1%]; p=0·018), bone fractures (19 [3%] vs six [1%]; p=0·014), and epileptic seizures (ten [2%] vs two [<1%]; p=0·038) at 6 months. Interpretation Oral fluoxetine 20 mg daily for 6 months after acute stroke did not improve functional outcome and increased the risk of falls, bone fractures, and epileptic seizures. These results do not support the use of fluoxetine to improve functional outcome after stroke