A model for the influence of pressure on the bulk modulus and the influence of temperature on the solidification pressure for liquid lubricants

Two pressure chambers, for compression experiments with liquids from zero to 2.2 GPa pressure, are described. The experimentally measured compressions are then compared to theoretical values given by an isothermal model of equation of state recently introduced for solids. The model describes the pressure and bulk modulus as a function of compression for different types of lubricants with a very high accuracy up to the pressure limit of the high pressure chamber used (2.2 GPa). In addition the influence of temperature on static solidification pressure was found to be a simple function of the thermal expansion of the fluid

A Comment on "Brans-Dicke Cosmology with a scalar field potential"

We show that a recent letter claiming to present exact cosmological solutions in Brans-Dicke theory actually uses a flawed set of equations as the starting point for their analysis. The results presented in the letter are therefore not valid.Comment: 2 pages, no figures. To appear in Europhysics Letter

LISACode : A scientific simulator of LISA

A new LISA simulator (LISACode) is presented. Its ambition is to achieve a new degree of sophistication allowing to map, as closely as possible, the impact of the different sub-systems on the measurements. LISACode is not a detailed simulator at the engineering level but rather a tool whose purpose is to bridge the gap between the basic principles of LISA and a future, sophisticated end-to-end simulator. This is achieved by introducing, in a realistic manner, most of the ingredients that will influence LISA's sensitivity as well as the application of TDI combinations. Many user-defined parameters allow the code to study different configurations of LISA thus helping to finalize the definition of the detector. Another important use of LISACode is in generating time series for data analysis developments

A tunable, dual mode field-effect or single electron transistor

A dual mode device behaving either as a field-effect transistor or a single electron transistor (SET) has been fabricated using silicon-on-insulator metal oxide semiconductor technology. Depending on the back gate polarisation, an electron island is accumulated under the front gate of the device (SET regime), or a field-effect transistor is obtained by pinching off a bottom channel with a negative front gate voltage. The gradual transition between these two cases is observed. This dual function uses both vertical and horizontal tunable potential gradients in non-overlapped silicon-on-insulator channel

Coherent Transport in Photonic Lattices: A Survey of Recent Analytic Results

The analytic specifications of photonic lattices with fractional revival (FR) and perfect state transfer (PST) are reviewed. The approach to their design which is based on orthogonal polynomials is highlighted. A compendium of analytic models with PST is offered. New results on their FR properties are included. The nearest-neighbour approximation is adopted in most of the review; one analytic example with next-to-nearest neighbour interactions is also presented

High Pressure Thermoelasticity of Body-centered Cubic Tantalum

We have investigated the thermoelasticity of body-centered cubic (bcc) tantalum from first principles by using the linearized augmented plane wave (LAPW) and mixed--basis pseudopotential methods for pressures up to 400 GPa and temperatures up to 10000 K. Electronic excitation contributions to the free energy were included from the band structures, and phonon contributions were included using the particle-in-a-cell (PIC) model. The computed elastic constants agree well with available ultrasonic and diamond anvil cell data at low pressures, and shock data at high pressures. The shear modulus $c_{44}$ and the anisotropy change behavior with increasing pressure around 150 GPa because of an electronic topological transition. We find that the main contribution of temperature to the elastic constants is from the thermal expansivity. The PIC model in conjunction with fast self-consistent techniques is shown to be a tractable approach to studying thermoelasticity.Comment: To be appear in Physical Review

Thermal Equation of State of Tantalum

We have investigated the thermal equation of state of tantalum from first principles using the Linearized Augmented Plane Wave (LAPW) and pseudopotential methods for pressures up to 300 GPa and temperatures up to 10000 K. The equation of state at zero temperature was computed using LAPW. For finite temperatures, mixed basis pseudopotential computations were performed for 54 atom supercells. The vibrational contributions were obtained by computing the partition function using the particle in a cell model, and the the finite temperature electronic free energy was obtained from the LAPW band structures. We discuss the behavior of thermal equation of state parameters such as the Gr\"uneisen parameter $\gamma$, $q$, the thermal expansivity $\alpha$, the Anderson-Gr\"uneisen parameter $\delta_T$ as functions of pressure and temperature. The calculated Hugoniot shows excellent agreement with shock-wave experiments. An electronic topological transition was found at approximately 200 GPa

Effect of nanostructuration on compressibility of cubic BN

Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron X-ray powder diffraction. A data fit to the Vinet equation of state yields the values of the bulk modulus B0 of 375(4) GPa with its first pressure derivative B0' of 2.3(3). The nanometer grain size (\sim20 nm) results in decrease of the bulk modulus by ~9%

Smooth tensionful higher-codimensional brane worlds with bulk and brane form fields

Completely regular tensionful codimension-n brane world solutions are discussed, where the core of the brane is chosen to be a thin codimension-(n-1) shell in an infinite volume flat bulk, and an Einstein-Hilbert term localized on the brane is included (Dvali-Gabadadze-Porrati models). In order to support such localized sources we enrich the vacuum structure of the brane by the inclusion of localized form fields. We find that phenomenological constraints on the size of the internal core seem to impose an upper bound to the brane tension. Finite transverse-volume smooth solutions are also discussed.Comment: 1+14 pages, 2 figures; section 2.3 improved, typos corrected and references added. Published versio