Performance Characterization of ESA's Tropospheric Delay Calibration System for Advanced Radio Science Experiments

Media propagation noises are amongst the main error sources of radiometric observables for deep space missions, with fluctuations of the tropospheric excess path length representing a relevant contributor to the Doppler noise budget. Microwave radiometers currently represent the most accurate instruments for the estimation of the tropospheric delay and delay rate along a slant direction. A prototype of a tropospheric delay calibration system (TDCS), using a 14 channel Ka/V band microwave radiometer, has been developed under a European Space Agency contract and installed at the deep space ground station in Malargüe, Argentina, in February 2019. After its commissioning, the TDCS has been involved in an extensive testbed campaign by recording a total of 44 tracking passes of the Gaia spacecraft, which were used to perform an orbit determination analysis. This work presents the first statistical characterization of the end-to-end performance of the TDCS prototype in an operational scenario. The results show that using TDCS-based calibrations instead of the standard GNSS-based calibrations leads to a significant reduction of the residual Doppler noise and instability

Influence of Blending Ratio and Polymer Matrix on the Lasing Properties of Perylenediimide Dyes

Perylenediimide (PDI) dyes dispersed in polymer films have demonstrated great success as active materials in thin-film organic lasers (TFOLs). The type of matrix used to host the dye and the dye doping rate are both crucial parameters to optimize laser performance. This work reports the study of two soluble PDIs, the comercial derivative perylene orange (PDI-O) emitting at around 580 nm, and a new dye (b-PDI-A) with substituents at the 1,7 bay positions of the PDI core emitting at around 620 nm, dispersed at different doping levels (up to 8 and 50 wt %, for PDI-O and b-PDI-A, respectively) in two widely used polymers for optoelectronics, polystyrene (PS) and poly(methyl methacrylate) (PMMA). The main goal is to determine which of these two polymers, and at which dye concentration, provides the best results for their use in TFOLs. The assessment of the active materials has been carried out through the analysis of their absorption, photoluminescence, and amplified spontaneous emission (ASE) properties. Their capability to form high-quality optical waveguides has also been studied by determining gain coefficients and waveguide losses. Results have shown that for both types of PDI derivatives PS is better than PMMA at any concentration, which means larger photoluminescence efficiency, lower ASE thresholds, longer ASE operational lifetimes, larger gain, and lower propagation waveguide losses. In addition, the onset concentration at which dye aggregation becomes significant as to negatively affect the optical properties is lower in PMMA than in PS; thus, the larger the blending ratio, the larger the superiority of PS with respect to PMMA is.Financial support from Spanish Ministerio de Economía y Competitividad (MINECO) and the European FEDER funds through Grants MAT2015-66586-R and CTQ2016-77039-R (AEI/FEDER, UE) is gratefully acknowledged. R.M-M is supported by a MINECO FPI contract (no. BES-2016-077681). M.A.D-G acknowledges support from the University of Alicante and to the Spanish Ministry of Education (grant no. PR2015-00390) to perform a sabbatical stay at UCSB

The genetic epidemiology of joint shape and the development of osteoarthritis

Congruent, low-friction relative movement between the articulating elements of a synovial joint is an essential pre-requisite for sustained, efficient, function. Where disorders of joint formation or maintenance exist, mechanical overloading and osteoarthritis (OA) follow. The heritable component of OA accounts for ~ 50% of susceptible risk. Although almost 100 genetic risk loci for OA have now been identified, and the epidemiological relationship between joint development, joint shape and osteoarthritis is well established, we still have only a limited understanding of the contribution that genetic variation makes to joint shape and how this modulates OA risk. In this article, a brief overview of synovial joint development and its genetic regulation is followed by a review of current knowledge on the genetic epidemiology of established joint shape disorders and common shape variation. A summary of current genetic epidemiology of OA is also given, together with current evidence on the genetic overlap between shape variation and OA. Finally, the established genetic risk loci for both joint shape and osteoarthritis are discussed

Near-Infrared Lasing in Four-Zigzag Edged Nanographenes by 1D versus 2D Electronic π-Conjugation

The search of compounds emitting in the near-infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four-zigzag edged NGs of the [m,n]peri-acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP-Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP-Ar shows dual-ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top-layer resonators. This study paves the way towards the development of stable low-cost all-plastic NIR lasers

Concentration dependence of amplified spontaneous emission in two oligo-(p-phenylenevinylene) derivatives

Amplified spontaneous emission sASEd in optically pumped polystyrene sPSd films doped with two different oligo-sp-phenylenevinylened derivatives sOPVsd, with three s3-OPVd and five s5-OPVd monomer units is reported. It is observed that there is a maximum content of oligomer s25 wt. % for 3-OPV and 20 wt. % for 5-OPVd that can be introduced in the films, due to degradation sin 3-OPVd and ASE quenching sin 5-OPVd. Optimal concentrations swith minimum pump-intensity thresholds for the observation of ASEd of 15 wt. % and 9 wt. % are measured for the trimer and the pentamer, respectively. The concentration dependence of the ASE threshold is discussed in terms of the optical absorption spectra. Gain coefficients are obtained by analyzing the dependence of the ASE with the length of the pump stripe. The results show that films based on 5-OPV appear to be more efficient and stable than those based on 3-OP

Excited states engineering enables efficient near-infrared lasing in nanographenes

The spectral overlap between stimulated emission (SE) and absorption from dark states (i.e. charges and triplets) especially in the near-infrared (NIR), represents one of the most effective gain loss channels in organic semiconductors. Recently, bottom-up synthesis of atomically precise graphene nanostructures, or nanographenes (NGs), has opened a new route for the development of environmentally and chemically stable materials with optical gain properties. However, also in this case, the interplay between gain and absorption losses has hindered the attainment of efficient lasing action in the NIR. Here, we demonstrate that the introduction of two fluoranthene imide groups to the NG core leads to a more red-shifted emission than the precursor NG molecule (685 vs. 615 nm) and also with a larger Stokes shift (45 nm vs. 2 nm, 1026 cm-1vs. 53 cm-1, respectively). Photophysical results indicate that, besides the minimisation of ground state absorption losses, such substitution permits to suppress the detrimental excited state absorption in the NIR, which likely arises from a dark state with charge-transfer character and triplets. This has enabled NIR lasing (720 nm) from all-solution processed distributed feedback devices with one order of magnitude lower thresholds than those of previously reported NIR-emitting NGs. This study represents an advance in the field of NGs and, in general, organic semiconductor photonics, towards the development of cheap and stable NIR lasers