Avoiding core's DUE & SDC via acoustic wave detectors and tailored error containment and recovery

The trend of downsizing transistors and operating voltage scaling has made the processor chip more sensitive against radiation phenomena making soft errors an important challenge. New reliability techniques for handling soft errors in the logic and memories that allow meeting the desired failures-in-time (FIT) target are key to keep harnessing the benefits of Moore's law. The failure to scale the soft error rate caused by particle strikes, may soon limit the total number of cores that one may have running at the same time. This paper proposes a light-weight and scalable architecture to eliminate silent data corruption errors (SDC) and detected unrecoverable errors (DUE) of a core. The architecture uses acoustic wave detectors for error detection. We propose to recover by confining the errors in the cache hierarchy, allowing us to deal with the relatively long detection latencies. Our results show that the proposed mechanism protects the whole core (logic, latches and memory arrays) incurring performance overhead as low as 0.60%. © 2014 IEEE.Peer ReviewedPostprint (author's final draft

Penelope: The NBTI-aware processor

Transistors consist of lower number of atoms with every technology generation. Such atoms may be displaced due to the stress caused by high temperature, frequency and current, leading to failures. NBTI (negative bias temperature instability) is one of the most important sources of failure affecting transistors. NBTI degrades PMOS transistors whenever the voltage at the gate is negative (logic inputPeer ReviewedPostprint (published version

Near-optimal loop tiling by means of cache miss equations and genetic algorithms

The effectiveness of the memory hierarchy is critical for the performance of current processors. The performance of the memory hierarchy can be improved by means of program transformations such as loop tiling, which is a code transformation targeted to reduce capacity misses. This paper presents a novel systematic approach to perform near-optimal loop tiling based on an accurate data locality analysis (cache miss equations) and a powerful technique to search the solution space that is based on a genetic algorithm. The results show that this approach can remove practically all capacity misses for all considered benchmarks. The reduction of replacement misses results in a decrease of the miss ratio that can be as significant as a factor of 7 for the matrix multiply kernel.Peer ReviewedPostprint (published version

High-Performance low-vcc in-order core

Power density grows in new technology nodes, thus requiring Vcc to scale especially in mobile platforms where energy is critical. This paper presents a novel approach to decrease Vcc while keeping operating frequency high. Our mechanism is referred to as immediate read after write (IRAW) avoidance. We propose an implementation of the mechanism for an Intel® SilverthorneTM in-order core. Furthermore, we show that our mechanism can be adapted dynamically to provide the highest performance and lowest energy-delay product (EDP) at each Vcc level. Results show that IRAW avoidance increases operating frequency by 57% at 500mV and 99% at 400mV with negligible area and power overhead (below 1%), which translates into large speedups (48% at 500mV and 90% at 400mV) and EDP reductions (0.61 EDP at 500mV and 0.33 at 400mV).Peer ReviewedPostprint (published version

Empowering a helper cluster through data-width aware instruction selection policies

Narrow values that can be represented by less number of bits than the full machine width occur very frequently in programs. On the other hand, clustering mechanisms enable cost- and performance-effective scaling of processor back-end features. Those attributes can be combined synergistically to design special clusters operating on narrow values (a.k.a. helper cluster), potentially providing performance benefits. We complement a 32-bit monolithic processor with a low-complexity 8-bit helper cluster. Then, in our main focus, we propose various ideas to select suitable instructions to execute in the data-width based clusters. We add data-width information as another instruction steering decision metric and introduce new data-width based selection algorithms which also consider dependency, inter-cluster communication and load imbalance. Utilizing those techniques, the performance of a wide range of workloads are substantially increased; helper cluster achieves an average speedup of 11% for a wide range of 412 apps. When focusing on integer applications, the speedup can be as high as 22% on averagePeer ReviewedPostprint (published version

Fuse: A technique to anticipate failures due to degradation in ALUs

This paper proposes the fuse, a technique to anticipate failures due to degradation in any ALU (arithmetic logic unit), and particularly in an adder. The fuse consists of a replica of the weakest transistor in the adder and the circuitry required to measure its degradation. By mimicking the behavior of the replicated transistor the fuse anticipates the failure short before the first failure in the adder appears, and hence, data corruption and program crashes can be avoided. Our results show that the fuse anticipates the failure in more than 99.9% of the cases after 96.6% of the lifetime, even for pessimistic random within-die variations.Peer ReviewedPostprint (published version

Variable-based multi-module data caches for clustered VLIW processors

Memory structures consume an important fraction of the total processor energy. One solution to reduce the energy consumed by cache memories consists of reducing their supply voltage and/or increase their threshold voltage at an expense in access time. We propose to divide the L1 data cache into two cache modules for a clustered VLIW processor consisting of two clusters. Such division is done on a variable basis so that the address of a datum determines its location. Each cache module is assigned to a cluster and can be set up as a fast power-hungry module or as a slow power-aware module. We also present compiler techniques in order to distribute variables between the two cache modules and generate code accordingly. We have explored several cache configurations using the Mediabench suite and we have observed that the best distributed cache organization outperforms traditional cache organizations by 19%-31% in energy-delay and by 11%-29% in energy-delay. In addition, we also explore a reconfigurable distributed cache, where the cache can be reconfigured on a context switch. This reconfigurable scheme further outperforms the best previous distributed organization by 3%-4%.Peer ReviewedPostprint (published version

Refueling: Preventing wire degradation due to electromigration

Electromigration is a major source of wire and via failure. Refueling undoes EM for bidirectional wires and power/ground grids-some of a chip's most vulnerable wires. Refueling exploits EM's self-healing effect by balancing the amount of current flowing in both directions of a wire. It can significantly extend a wire's lifetime while reducing the chip area devoted to wires.Peer ReviewedPostprint (published version

Reducing soft errors through operand width aware policies

Soft errors are an important challenge in contemporary microprocessors. Particle hits on the components of a processor are expected to create an increasing number of transient errors with each new microprocessor generation. In this paper, we propose simple mechanisms that effectively reduce the vulnerability to soft errors in a processor. Our designs are generally motivated by the fact that many of the produced and consumed values in the processors are narrow and their upper order bits are meaningless. Soft errors caused by any particle strike to these higher order bits can be avoided by simply identifying these narrow values. Alternatively, soft errors can be detected or corrected on the narrow values by replicating the vulnerable portion of the value inside the storage space provided for the upper order bits of these operands. As a faster but less fault tolerant alternative to ECC and parity, we offer a variety of schemes that make use of narrow values and analyze their efficiency in reducing soft error vulnerability of different data-holding components of a processor. On average, techniques that make use of the narrowness of the values can provide 49 percent error detection, 45 percent error correction, or 27 percent error avoidance coverage for single bit upsets in the first level data cache across all Spec2K. In other structures such as the immediate field of the issue queue, an average error detection rate of 64 percent is achieved.Peer ReviewedPostprint (published version

Impact of parameter variations on circuits and microarchitecture

Parameter variations, which are increasing along with advances in process technologies, affect both timing and power. Variability must be considered at both the circuit and microarchitectural design levels to keep pace with performance scaling and to keep power consumption within reasonable limits. This article presents an overview of the main sources of variability and surveys variation-tolerant circuit and microarchitectural approaches.Peer ReviewedPostprint (published version