Effect of high hydrostatic pressure and temperature on volatile off-flavors formation in milk

The aroma of milk has been often defined as bland and pleasant, yet characteristic. Conventional thermal processing of milk can certainly extend shelf life, but inevitably changes its flavor. High pressure processing has been suggested as an alternative for milk pasteurization with improved fresh flavor retention. The objective of this project was to study off-flavor volatile formation in milk subjected to high hydrostatic pressure combined with moderate heating. Two sensitive and accurate new techniques were developed for the analysis of off-flavor compounds. Solid-phase microextraction/gas chromatography with flame ionization detection was used for the analysis of aldehydes, ketones, and dimethyl sulfide. Solid-phase microextraction/gas chromatography with pulsed flame photometric detection was used for the selective analysis of trace sulfur compounds. Milk subjected to different treatment combinations of pressure, temperature and time showed that aldehydes formation is promoted during high pressure processing, while that of methyl ketones and sulfur compounds is inhibited. It was also observed that at the same temperature, off-flavor formation under high hydrostatic pressure differed from that observed under atmospheric pressure. The formation of aldehydes under high pressure followed first order reactions with rate constants increasing with temperature and pressure. Methyl ketones and most sulfur compounds concentrations showed no increase for all treatment combinations. Added food antioxidants significantly inhibited the formation of aldehydes in high pressure treated milk. This suggested that the aldehyde formation pathway under high pressure is not different from that observed under atmospheric conditions. The results obtained in this research work gave new insights on the flavor formation under high hydrostatic pressure, while offering the possibility of designing high pressure processes for milk with extended shelf life and improved flavor

Quantification of Trace Volatile Sulfur Compounds in Milk by Solid-Phase Microextraction and Gas Chromatography–Pulsed Flame Photometric Detection

Volatile sulfur compounds have been reported to be responsible for the sulfurous off-flavors generated during the thermal processing of milk; however, their analysis has been a challenge due to their high reactivity, high volatility, and low sensory threshold. In this study, reactive thiols were stabilized and the volatile sulfur compounds in milk were extracted by headspace solidphase microextraction, and analyzed by gas chromatography and pulsed-flame photometric detection. Calibration curves for 7 sulfur-containing compounds were constructed in milk by the standard addition technique. Raw, pasteurized, and UHT milk samples with various fat contents were analyzed. Compared with raw and pasteurized samples, UHT milk contained substantially higher concentrations of hydrogen sulfide, methanethiol, carbon disulfide, dimethyl trisulfide, and dimethyl sulfoxide. The high odor activity values calculated for methanethiol and dimethyl trisulfide suggested that these 2 compounds, in addition to dimethyl sulfide reported in a previous study, could be the most important contributors to the sulfurous note in UHT milkKeywords: volatile sulfur, milk off-flavor, solid-phase microextraction, pulsed-flame photometric detectionOriginally published in Journal of Dairy Science (http://www.journalofdairyscience.org/) and copyrighted by the American Dairy Science Association

Quantitative determination of thermally derived off-flavor compounds in milk using solid-phase microextraction and gas chromatography

Many volatile compounds generated during the thermal processing of milk have been associated with cooked, stale, and sulfurous notes in milk and are considered as off-flavor by most consumers. A headspace solid-phase microextraction (HS-SPME)/gas chromatographic technique for the quantitative analysis of thermally derived off-flavor compounds was developed in this study. The extraction temperature, time, and sample amount were optimized using a randomized 23 central composite rotatable design with 2 central replicates and 2 replicates in each factorial point along with response surface methodology. Calibration curves were constructed in milk using the standard addition technique, and then used to quantify 20 off-flavor compounds in raw, pasteurized, and UHT milk samples with various fat contents. The concentrations of these volatiles in raw and pasteurized milk samples were not significantly different. However, dimethyl sulfide, 2-hexanone, 2-heptanone, 2-nonanone, 2-undecanone, 2-methylpropanal, 3-methylbutanal, heptanal, and decanal were found at higher concentrations in UHT milk as compared with raw and pasteurized milk samples. In addition, the concentration of methyl ketones was greater in UHT milk with higher fat content. The calculated odor activity values suggested that 2,3-butanedione, 2-heptanone, 2-nonanone, 2-methylpropanal, 3-methylbutanal, nonanal, decanal, and dimethyl sulfide could be important contributors to the off-flavor of UHT milk. The HS-SPME technique developed in this study is accurate and relatively simple, and can be used for the quantification of thermally derived off-flavor compounds in milk.First published in Journal of Dairy Science (http://www.journalofdairyscience.org/). Copyrighted by the American Dairy Science Association.Keywords: milk, off-flavor, solid-phase microextraction, quantificatio

Evaluation of bread quality and volatile compounds of breads made by sourdoughs fermented by sediments of pulque (xaxtle) as starter culture

Sourdough is an important modern fermentation method of cereal flour and water. The fermentation process is carried out by lactic acid bacteria (LAB) and yeasts which confer specific flavor characteristics to the bread. The main aim of this research was to investigate the bread quality and volatile compounds of breads made by sourdoughs inoculated with sediments of pulque (xaxtle) used it as starter culture. Fifty five volatile compounds were found in the bread made with sourdoughs inoculated with xaxtle from three different regions of Mexico. Using gas chromatography-mass spectrometry, compounds as 3-hydroxy-2-butanone; 3-methyl-1-butanol; 2-methyl, 1-butanol; dimethyl disulfide; furfural, nonanal, phenyl ethyl alcohol and butanoic acid were presented in the flavor profile of the breads and having a positive response to sensory analysis made by evaluators. The xaxtle of Nanacamilpa (XN) and the xaxtle of Villa Alta (XV) were the best breads getting 8.3±0.03, 8.8±0.02, 6.2±0.08 and 8.2±0.01 scores in a scale from 0 to 10 in color, smell, texture and flavor attributes respectively which are positive attributes in favor of the quality bread. As a result of fermentation sourdough with LAB and yeasts from the xaxtle during 24 hours (30° C), the bread made with the sourdough inoculated with xaxtle of Milpa Alta (XM) showed the major acid flavor therefore its sample was less acceptable getting 8.1±0.01, 7.8±0.02, 5.3±0.01 and 7.9±0.01 in the same attributes evaluated. The xaxtle of Nanacamilpa, Tlaxcala (XN) run better than the others as starter fermentation culture for sourdoughs

Ion-exchanged geopolymer for photocatalytic degradation of a volatile organic compound

In thepresentworkitisshownhowgeopolymerscanbeusedtocontrolindoorandoutdoorair pollution byphotolysisof2-ButanoneasaVolatileOrganicCompound(VOC).Anionexchange procedurewasfollowedtoincorporateTiO2 into ageopolymer(IEG),anddifferent2-Butanone concentrations wereusedinabatchreactorunderdryandhumidconditions.Variationon 2-Butanone concentrationwasfollowedbygaschromatography.ALangmuir Hinshelwood modelwas used todeterminethedisappearancerateofreactantattheinitialstageofthereaction.Gasca-Tirado, J.; Manzano-Ramirez, A.; Vazquez-Landaverde, PA.; Herrera-Diaz, EI.; Rodriguez-Ugarte, ME.; Rubio-Avalos, JC.; Amigó Borrás, V.... (2014). Ion-exchanged geopolymer for photocatalytic degradation of a volatile organic compound. Materials Letters. 134:222-224. doi:10.1016/j.matlet.2014.07.090S22222413

The abundant marine bacterium Pelagibacter simultaneously catabolizes dimethylsulfoniopropionate to the gases dimethyl sulfide and methanethiol

Marine phytoplankton produce ~109 tons of dimethylsulfoniopropionate (DMSP) per year1,2, an estimated 10% of which is catabolized by bacteria through the DMSP cleavage pathway to the climatically active gas dimethyl sulfide (DMS)3,4. SAR11 Alphaproteobacteria (order Pelagibacterales), the most abundant chemoorganotrophic bacteria in the oceans, have been shown to assimilate DMSP into biomass, thereby supplying this cell’s unusual requirement for reduced sulfur5,6. Here we report that Pelagibacter HTCC1062 produces the gas methanethiol (MeSH) and that simultaneously a second DMSP catabolic pathway, mediated by a cupin-like DMSP lyase, DddK, shunts as much as 59% of DMSP uptake to DMS production. We propose a model in which the allocation of DMSP between these pathways is kinetically controlled to release increasing amounts of DMS as the supply of DMSP exceeds cellular sulfur demands for biosynthesis

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

The original version of this article unfortunately contained a mistake

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat