203 research outputs found

    La imagen apagada

    Get PDF
    El proyecto pictórico La imagen apagada, parte de mi interés por cuestionar el cuadro como artefacto de representación, mediante la exploración y el retorcimiento de la cualidad de una supuesta función descriptiva/representativa que se le atribuye históricamente. A través de la descontextualización de fotogramas fílmicos y de fotografías, genero vinculos narrativos entre las distintas pinturas, produciendo otro tipo muy diferente de narratividad entre estas, valiéndome de sus diferencias, que pasa a depender de sus cualidades formales, figurales y espaciale

    Propiedades mecánicas de la mezcla asfáltica modificada con adición de caucho y con polímeros

    Get PDF
    La presente investigación se realizó con el objetivo de determinar las propiedades mecánicas de las mezclas asfálticas con adición de caucho y polímeros, con el fin de avanzar en esta tecnología que se ha consolidado a nivel internacional desde hace muchos años, brindando soluciones a los problemas enfrentados por las empresas de asfalto en las carreteras actuales del Perú. Todos los datos obtenidos son bibliográficos, se analizan mezclas modificadas con adición de caucho y polímeros para conocer sus propiedades mecánicas que mejoran la mezcla asfáltica, luego se comparan diferentes ensayos, actualmente con caucho reciclado de llantas de la misma manera también se analizan ensayos con polímeros SBS, en el que se evalúan las propiedades mecánicas y/o comportamiento de las dos mezclas. Los resultados obtenidos muestran mejoras significativas en las propiedades mecánicas y el rendimiento de las mezclas de asfalto modificado con caucho y polímero, además, son económicamente más rentables a largo plazo ya que las llantas viejas se reciclan porque no hay necesidad de un mantenimiento temprano

    Self-limited autoimmune disease related to transient donor B cell activation in mice neonatally injected with semi-allogeneic F1 cells

    Get PDF
    BALB/c mice injected at birth with 108 semi-allogeneic (C57BL/6 x BALB.IgHb)F1 spleen cells develop a lupus-like syndrome in which autoantibodles bear exclusively the donor allotype. We have analyzed the evolution of donor B cell chimerism and the autoimmune manifestations during the first year of life in these mice. Anti-DNA, -histone, and -cardiolipln IgG antibodies as well as circulating immune complexes appeared in the second week of life, reached the highest values around the sixth week, and then progressively dropped to normal values after the sixth month in most mice. The kinetics of the evolution of the autoimmune manifestations, as well as the kinetics of serum donor Ig allotype, were parallel to the kinetics of donor B cell chimerism, which was particularly prominent in the spleens in early weeks of life, and progressively decreased after remission of the autoimmune syndrome. Membrane-proliferative glomerulonephritls, which was followed as the more representative histological abnormality in this model, was particularly evident after 10 weeks of life, but disappeared by the end of the follow-up. Interestingly, when mice with a self-limited disease were re-injected with 108 F1 spleen cells i.v., a flare in the serologlcal manifestations was observed. In these re-injected mice a predominance of anti-DNA, lgG1 antibodies bearing exclusively the donor allotype was also observed, as in the early weeks of life. These results emphasize the central role of donor B cell chimerism in the development and in the self-limitation of the autoimmune disease in parental mice neonatally injected with F1 cells and Indicate that the capacity to react with F1 cells, to generate a renewed burst of symptoms, persists in these mice after the disappearance of autoimmune finding

    Electrochemical vs. chemical promotion in the H2 production catalytic reactions

    Get PDF
    The addition of electronic promoters chemically (chemical promotion) or electrochemically (electrochemical promotion or EPOC) induces very significant and similar effects on catalytic hydrogen production reactions such as CH4 and CH3OH conversion reactions, water-gas shift or ammonia decomposition. Both kinds of promotional phenomena follow the same general mechanism but the usefulness of the latter is highlighted. In this paper, the most important and recent contributions of the electrochemical promotion in different hydrogen production reactions are reviewed and compared to those based on conventional chemical promotion methods, mostly focusing on alkali promoters. The functional similarities and operational differences between both promotion ways are pointed out, and their impact on the hydrogen production technology is discussed. By this way the possibility of in-situ controlling the promoter coverage on the catalyst under working conditions and the in-situ catalyst regeneration from carbon deposition, among other novel contributions, lead EPOC to new opportunities for both: development of tailored effective catalysts and operation of hydrogen catalytic processes.La adición de promotores electrónicos químicamente (promoción química) o electroquímicamente (promoción electroquímica o EPOC) induce efectos muy significativos y similares en las reacciones catalíticas de producción de hidrógeno , como las reacciones de conversión de CH 4 y CH 3 OH, el desplazamiento agua-gas o la descomposición del amoníaco .. Ambos tipos de fenómenos promocionales siguen el mismo mecanismo general pero se destaca la utilidad del último. En este trabajo se revisan las contribuciones más importantes y recientes de la promoción electroquímica en diferentes reacciones de producción de hidrógeno y se comparan con aquellas basadas en métodos de promoción química convencionales, centrándose principalmente en promotores alcalinos. Se señalan las similitudes funcionales y las diferencias operativas entre ambas formas de promoción y se discute su impacto en la tecnología de producción de hidrógeno. De esta manera, la posibilidad de controlar in situ la cobertura del promotor sobre el catalizador en condiciones de trabajo y la regeneración in situ del catalizador a partir de la deposición de carbono ., entre otras contribuciones novedosas, llevan a EPOC a nuevas oportunidades para ambos: desarrollo de catalizadores efectivos personalizados y operación de procesos catalíticos de hidrógeno

    Simulation of the gasification of animal wastes in a dual gasifier using Aspen Plus®

    Get PDF
    The gasification of an animal waste biomass (manure) in a dual gasifier was studied using the software Aspen Plus®. For this purpose, a model based on a Gibbs free energy reactor was considered. Effects of the gasification temperature, the gasifying/biomass ratio and the use of steam and CO2 as the gasifying agents on the composition and the low heating value (LHV) of the produced syngas were evaluated. In this sense, the H2/CO ratio and the LHV were the parameters calculated to stablish the best operating conditions for the production of either hydrocarbons via Fischer-Tropsch or energy. Furthermore, the CO2 net emissions generated by the gasification process were also important in the selection of the best operating conditions from an environmental point of view. The obtained results showed that for both gasifying agents the H2 and CO production was favoured at high temperatures whereas the production of CH4 and CO2 was favoured at low ones. On the other hand, the H2 production was higher when steam was used as the gasifying agent and the formation of CO was enhanced when CO2 was considered as gasification agent. An increase of the gasifying agent/biomass ratio had a negatively influence on the production of CH4, leading to a decrease of the LHV. Therefore, steam as the gasifying agent and high temperatures favoured the obtaining of a syngas suitable for the Fischer-Tropsch process whereas CO2 and low gasification temperatures enhanced a syngas with a high LHV which could be used for energy production. Finally, the net CO2 emissions were estimated to be lower when CO2 was again used as the gasifying agent.Se estudió la gasificación de una biomasa de desecho animal (estiércol) en un gasificador dual utilizando el software Aspen Plus®. Para ello se consideró un modelo basado en un reactor de energía libre de Gibbs. Se evaluaron los efectos de la temperatura de gasificación, la relación gasificación/biomasa y el uso de vapor y CO 2 como agentes gasificantes sobre la composición y el poder calorífico bajo (LHV) del gas de síntesis producido. En este sentido, la relación H 2 /CO y el LHV fueron los parámetros calculados para establecer las mejores condiciones de operación para la producción de hidrocarburos ya sea vía Fischer-Tropsch o energía. Además, el CO2Las emisiones netas generadas por el proceso de gasificación también fueron importantes en la selección de las mejores condiciones de operación desde el punto de vista ambiental. Los resultados obtenidos mostraron que para ambos agentes gasificantes la producción de H 2 y CO se vio favorecida a temperaturas altas mientras que la producción de CH 4 y CO 2 se vio favorecida a temperaturas bajas. Por otro lado, la producción de H 2 fue mayor cuando se utilizó vapor como agente gasificante y la formación de CO aumentó cuando se consideró CO 2 como agente gasificante. Un aumento de la relación gasificante/biomasa influyó negativamente en la producción de CH 4, lo que lleva a una disminución de la LHV. Por lo tanto, el vapor como agente gasificante y las altas temperaturas favorecieron la obtención de un gas de síntesis adecuado para el proceso Fischer-Tropsch, mientras que el CO 2 y las bajas temperaturas de gasificación mejoraron un gas de síntesis con un alto LHV que podría utilizarse para la producción de energía. Finalmente, se estimó que las emisiones netas de CO 2 serían menores cuando se usara nuevamente CO 2 como agente gasificante

    Hydroxyethyl cellulose/alumina-based aerogels as lightweight insulating materials with high mechanical strength

    Get PDF
    Alumina aerogels reinforced with hydroxyethyl cellulose (HEC) have been successfully synthesised using an environmentally friendly freeze-drying method. Alumina aerogels are materials with interesting properties, such as low density, high-temperature stability, high porosity and high surface area, which can be used in several industrial applications. It is necessary to add one or more supporting materials, such as carbon nanofibres and a fibrous second phase such as cellulose, to the matrix to reinforce the mechanical properties of the aerogels. In this study, the influence of the HEC-to-aluminium tri-sec-butoxide (ASB) solution mass ratio on the morphological, mechanical and thermal properties of the synthesised aerogels and its impact on the thermal insulation properties of the resulting materials were evaluated. The apparent density of the hydroxyethyl cellulose-reinforced alumina-based aerogels increased with the amount of HEC. Thus, compact structures with a small pore size were obtained when increasing HEC/ASB solution mass ratio. The incorporation of HEC into the ASB matrix led to an increase in the mechanical properties in terms of the Young’s modulus. Thermal stability of samples varied as a consequence of the HEC addition. Thus, the second decomposition stage shifted to lower temperatures with HEC incorporation. In addition, all synthesised aerogels showed low thermal conductivities. The remarkable physical characteristics of the hydroxyethyl cellulose-reinforced alumina-based aerogels prepared herein and the successful synthesis suitable for scale-up make them a good candidate for construction applications

    Experimental investigation of a thermal storage system using phase change materials

    Get PDF
    A home-made heat exchanger (HE), used in the evaluation of the performance of different phase change materials (PCMs), was designed, mounted and operated. The HE unit was used as a heat thermal storage system for recovering the residual energy coming from a hydrogen cycle, which could be in turn used in building air-conditioning facilities. Four PCMs (Rubitherm® RT28, Rubitherm® RT48, Rubitherm® RT55 and Mikrocaps PCM35; the latter supplied as a slurry of microcapsules) was selected for their suitable thermal properties. Water was used as the heat transfer fluid (HTF) while the PCM was tightly stored inside the shell. Among all the studied PCMs, Rubitherm® RT48 presented the best thermal performance since it accumulated the maximum amount of energy. The influence of the HTF flow rate on the thermal performance of the shell and tube HE was also evaluated. Low HTF flow rates led to high values of heat transferred. Finally, different operation modes (watertight and countercurrent PCM flow) were compared by using Mikrocaps PCM35. PCM countercurrent flow system showed to be the best experimental set-up configuration system for energy transfer, reaching values of heat accumulation about 71% higher than that shown by the watertight mode.Se diseñó, montó y operó un intercambiador de calor casero (HE), utilizado en la evaluación del desempeño de diferentes materiales de cambio de fase (PCM). La unidad HE se utilizó como sistema de almacenamiento térmico de calor para recuperar la energía residual procedente de un ciclo de hidrógeno, que a su vez podría utilizarse en la construcción de instalaciones de aire acondicionado. Se seleccionaron cuatro PCM (Rubitherm® RT28, Rubitherm® RT48, Rubitherm® RT55 y Mikrocaps PCM35; este último suministrado como una suspensión de microcápsulas) por sus propiedades térmicas adecuadas. Se usó agua como fluido de transferencia de calor (HTF) mientras que el PCM se almacenó herméticamente dentro de la carcasa. Entre todos los PCM estudiados, Rubitherm® RT48 presentó el mejor desempeño térmico ya que acumuló la máxima cantidad de energía. También se evaluó la influencia del caudal de HTF en el rendimiento térmico de la carcasa y el tubo HE. Las bajas tasas de flujo de HTF condujeron a altos valores de transferencia de calor. Finalmente, se compararon diferentes modos de operación (flujo PCM estanco y contracorriente) utilizando Mikrocaps PCM35. El sistema de flujo a contracorriente PCM demostró ser el mejor sistema de configuración experimental para la transferencia de energía, alcanzando valores de acumulación de calor un 71% superiores a los mostrados por el modo estanco

    CO2 Hydrogenation to Methanol at Atmospheric Pressure: Influence of the Preparation Method of Pd/ZnO Catalysts

    Get PDF
    The aim of the work described here was to evaluate the catalytic performance of palladium catalysts supported on zinc oxide (Pd/ZnO) in the hydrogenation of CO2 to obtain methanol at atmospheric pressure. The influence of the reduction temperature, calcination conditions, metal loading and Pd precursor on the catalytic performance was studied.El objetivo del trabajo aquí descrito fue evaluar el desempeño catalítico de catalizadores de paladio soportados sobre óxido de zinc (Pd/ZnO) en la hidrogenación de CO 2 para obtener metanol a presión atmosférica. Se estudió la influencia de la temperatura de reducción, las condiciones de calcinación, la carga de metal y el precursor de Pd sobre el rendimiento catalítico

    Electrochemical promotion and characterization of PdZn alloy catalysts with K and Na ionic conductors for pure gaseous CO2 hydrogenation

    Get PDF
    A PdZn alloy has been used for the first time as a catalytic electrochemical film for CO2 hydrogenation. Three different electrochemical systems were prepared to study the influence of the Pd/Zn ratio and the presence of potassium and sodium ions. These catalysts were characterized by XRD, SEM and cyclic voltammetry and then tested in the hydrogenation of CO2 at three different H2/CO2 feed ratios (3, 9 and 39) and three temperatures (300, 320 and 340 °C) with electrochemical promotion by Na+ and K+ ions. CH3OH and CO were the only two products detected. During the electrochemical promotion, a low quantity of ions increases the formation rate of CH3OH and a high quantity leads to the poisoning of the PdZn active sites. The catalysts which have palladium and the palladium-zinc alloy in their structure show an electrophilic behavior in the CO formation and when only the alloy is formed in the catalyst, the CO has the same behavior found for the methanol. Apparent Faradaic efficiency values above 1000 were obtained under the different conditions tested.Se ha utilizado por primera vez una aleación de PdZn como película electroquímica catalítica para la hidrogenación de CO2. Se prepararon tres sistemas electroquímicos diferentes para estudiar la influencia de la relación Pd/Zn y la presencia de iones de potasio y sodio. Estos catalizadores fueron caracterizados por XRD, SEM y voltamperometría cíclica y luego probados en la hidrogenación de CO 2 a tres relaciones de alimentación H 2 /CO 2 diferentes (3, 9 y 39) y tres temperaturas (300, 320 y 340 °C) con promoción electroquímica por iones Na + y K + . Canal 3OH y CO fueron los dos únicos productos detectados. Durante la promoción electroquímica, una cantidad baja de iones aumenta la tasa de formación de CH 3 OH y una cantidad alta conduce al envenenamiento de los sitios activos de PdZn. Los catalizadores que tienen paladio y la aleación de paladio-zinc en su estructura muestran un comportamiento electrofílico en la formación de CO y cuando solo se forma la aleación en el catalizador, el CO tiene el mismo comportamiento encontrado para el metanol. Se obtuvieron valores aparentes de eficiencia Faradaica por encima de 1000 bajo las diferentes condiciones ensayadas
    corecore