How gravity and size affect the acceleration statistics of bubbles in turbulence

We report the results of the first systematic Lagrangian experimental investigation in a previously unexplored regime of very light (air bubbles in water) and large (D/¿ 1) particles in turbulence. Using a traversing camera setup and particle tracking, we study the Lagrangian acceleration statistics of ~3 mm diameter (D) bubbles in a water tunnel with nearly homogeneous and isotropic turbulence generated by an active grid. The Reynolds number (Re¿) is varied from 145 to 230, resulting in size ratios, D/¿, in the range of 7.3–12.5, where ¿ is the Kolmogorov length scale. The experiments reveal that gravity increases the acceleration variance and reduces the intermittency of the probability density function (PDF) in the vertical direction. Once the gravity offset has been subtracted, the variances of both the horizontal and vertical acceleration components are about 5 ± 2 times larger than those measured in the same flow for fluid tracers. Moreover, for these light particles, the experimental acceleration PDF shows a substantial reduction of intermittency at growing size ratios, in contrast with neutrally buoyant or heavy particles. All these results closely match numerical simulations of finite-sized bubbles with the Faxén corrections

Technical design report for the upgrade of the ALICE inner tracking system

ALICE (A Large Ion Collider Experiment) is studying the physics of strongly interacting matter, and in particular the properties of the Quark-Gluon Plasma (QGP), using proton-proton, proton-nucleus and nucleus-nucleus collisions at the CERN LHC (Large Hadron Collider). The ALICE Collaboration is preparing a major upgrade of the experimental apparatus, planned for installation in the second long LHC shutdown in the years 2018-2019. A key element of the ALICE upgrade is the construction of a new, ultra-light, high-resolution Inner Tracking System (ITS) based on monolithic CMOS pixel detectors. The primary focus of the ITS upgrade is on improving the performance for detection of heavy-flavour hadrons, and of thermal photons and low-mass di-electrons emitted by the QGP. With respect to the current detector, the new Inner Tracking System will significantly enhance the determination of the distance of closest approach to the primary vertex, the tracking efficiency at low transverse momenta, and the read-out rate capabilities. This will be obtained by seven concentric detector layers based on a 50 \uce\ubcm thick CMOS pixel sensor with a pixel pitch of about 30\uc3\u9730 \uce\ubcm2. This document, submitted to the LHCC (LHC experiments Committee) in September 2013, presents the design goals, a summary of the R&D activities, with focus on the technical implementation of the main detector components, and the projected detector and physics performance. \uc2\ua9 2014 CERN on behalf of The ALICE Collaboration

Technical Design Report for the Upgrade of the ALICE Inner Tracking System

Technical Design Report for the Upgrade of the ALICE Inner Tracking Syste

Technical design report for the upgrade of the ALICE inner tracking system

ALICE (A Large Ion Collider Experiment) is studying the physics of strongly interacting matter, and in particular the properties of the Quark-Gluon Plasma (QGP), using proton-proton, proton-nucleus and nucleus-nucleus collisions at the CERN LHC (Large Hadron Collider). The ALICE Collaboration is preparing a major upgrade of the experimental apparatus, planned for installation in the second long LHC shutdown in the years 2018-2019. A key element of the ALICE upgrade is the construction of a new, ultra-light, high-resolution Inner Tracking System (ITS) based on monolithic CMOS pixel detectors. The primary focus of the ITS upgrade is on improving the performance for detection of heavy-flavour hadrons, and of thermal photons and low-mass di-electrons emitted by the QGP. With respect to the current detector, the new Inner Tracking System will significantly enhance the determination of the distance of closest approach to the primary vertex, the tracking efficiency at low transverse momenta, and the read-out rate capabilities. This will be obtained by seven concentric detector layers based on a 50 μm thick CMOS pixel sensor with a pixel pitch of about 30×30 μm2. This document, submitted to the LHCC (LHC experiments Committee) in September 2013, presents the design goals, a summary of the R&D activities, with focus on the technical implementation of the main detector components, and the projected detector and physics performance