Evaluation of gamma irradiation effect and Pseudomonas flourescens against Penicillium expansum

Antagonistic effect of Pseudomonas fluorescens and influence of gamma irradiation on the development of Penicillium expansum, the causal agent of postharvest disease on apple fruit was studied. P. fluorescens was originally isolated from rhizosphere of the apple trees. Suspension of P. fluorescens and P. expansum were mixed in test tubes in proportions of 1:5, 2:5, 3:5 and 4:5 (V/V). The inhibitory effect depended on the proportion of the bacterium to the fungus in the mixture. The best inhibition was observed after 48 h at the ratio of 3:5. Gamma irradiation above 3 KGy completelyinhibited mycelial growth, while the highest dose around 600 Gy mostly killed P. expansum spores. Our experiment demonstrates that the combination of gamma irradiation and P. fluorescens was more effective in reducing P. expansum growth, than either treatment alone and that the integration of irradiation and antagonist treatments can be more effective. The results of this study show that improved control by irradiation at labeled dose in combination with antagonist could allow direct incorporation of the biocontrol agent. Thus, the combination of the P. fluorescens with gamma irradiation showed an impressive effect on increasing applied range of irradiation for postharvest control by decreasing of dose rate.Key words: Antagonist treatment, gamma irradiation, Penicillium expansum, Pseudomonas fluorescens, postharvest disease

Pion mass dependence of the Kl3K_{l3} semileptonic scalar form factor within finite volume

We calculate the scalar semileptonic kaon decay in finite volume at the momentum transfer $t_{m} = (m_{K} - m_{\pi})^2$, using chiral perturbation theory. At first we obtain the hadronic matrix element to be calculated in finite volume. We then evaluate the finite size effects for two volumes with $L = 1.83 fm$ and $L= 2.73 fm$ and find that the difference between the finite volume corrections of the two volumes are larger than the difference as quoted in \cite{Boyle2007a}. It appears then that the pion masses used for the scalar form factor in ChPT are large which result in large finite volume corrections. If appropriate values for pion mass are used, we believe that the finite size effects estimated in this paper can be useful for Lattice data to extrapolate at large lattice size.Comment: 19 pages, 5 figures, accepted for publication in EPJ

Normal parameter reduction algorithm in soft set based on hybrid binary particle swarm and biogeography optimizer

© 2019, Springer-Verlag London Ltd., part of Springer Nature. Existing classification techniques that are proposed previously for eliminating data inconsistency could not achieve an efficient parameter reduction in soft set theory, which effects on the obtained decisions. Meanwhile, the computational cost made during combination generation process of soft sets could cause machine infinite state, which is known as nondeterministic polynomial time. The contributions of this study are mainly focused on minimizing choices costs through adjusting the original classifications by decision partition order and enhancing the probability of searching domain space using a developed Markov chain model. Furthermore, this study introduces an efficient soft set reduction-based binary particle swarm optimized by biogeography-based optimizer (SSR-BPSO-BBO) algorithm that generates an accurate decision for optimal and sub-optimal choices. The results show that the decision partition order technique is performing better in parameter reduction up to 50%, while other algorithms could not obtain high reduction rates in some scenarios. In terms of accuracy, the proposed SSR-BPSO-BBO algorithm outperforms the other optimization algorithms in achieving high accuracy percentage of a given soft dataset. On the other hand, the proposed Markov chain model could significantly represent the robustness of our parameter reduction technique in obtaining the optimal decision and minimizing the search domain.Published versio

Feature Selection via Chaotic Antlion Optimization

Selecting a subset of relevant properties from a large set of features that describe a dataset is a challenging machine learning task. In biology, for instance, the advances in the available technologies enable the generation of a very large number of biomarkers that describe the data. Choosing the more informative markers along with performing a high-accuracy classification over the data can be a daunting task, particularly if the data are high dimensional. An often adopted approach is to formulate the feature selection problem as a biobjective optimization problem, with the aim of maximizing the performance of the data analysis model (the quality of the data training fitting) while minimizing the number of features used.This work was partially supported by the IPROCOM Marie Curie initial training network, funded through the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/ under REA grants agreement No. 316555, and by the Romanian National Authority for Scientific Research, CNDIUEFISCDI, project number PN-II-PT-PCCA-2011-3.2- 0917. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

Forecasting Government Bond Spreads with Heuristic Models:Evidence from the Eurozone Periphery

This study investigates the predictability of European long-term government bond spreads through the application of heuristic and metaheuristic support vector regression (SVR) hybrid structures. Genetic, krill herd and sine–cosine algorithms are applied to the parameterization process of the SVR and locally weighted SVR (LSVR) methods. The inputs of the SVR models are selected from a large pool of linear and non-linear individual predictors. The statistical performance of the main models is evaluated against a random walk, an Autoregressive Moving Average, the best individual prediction model and the traditional SVR and LSVR structures. All models are applied to forecast daily and weekly government bond spreads of Greece, Ireland, Italy, Portugal and Spain over the sample period 2000–2017. The results show that the sine–cosine LSVR is outperforming its counterparts in terms of statistical accuracy, while metaheuristic approaches seem to benefit the parameterization process more than the heuristic ones

Evolutionary Computation, Optimization and Learning Algorithms for Data Science

A large number of engineering, science and computational problems have yet to be solved in a computationally efficient way. One of the emerging challenges is how evolving technologies grow towards autonomy and intelligent decision making. This leads to collection of large amounts of data from various sensing and measurement technologies, e.g., cameras, smart phones, health sensors, smart electricity meters, and environment sensors. Hence, it is imperative to develop efficient algorithms for generation, analysis, classification, and illustration of data. Meanwhile, data is structured purposefully through different representations, such as large-scale networks and graphs. We focus on data science as a crucial area, specifically focusing on a curse of dimensionality (CoD) which is due to the large amount of generated/sensed/collected data. This motivates researchers to think about optimization and to apply nature-inspired algorithms, such as evolutionary algorithms (EAs) to solve optimization problems. Although these algorithms look un-deterministic, they are robust enough to reach an optimal solution. Researchers do not adopt evolutionary algorithms unless they face a problem which is suffering from placement in local optimal solution, rather than global optimal solution. In this chapter, we first develop a clear and formal definition of the CoD problem, next we focus on feature extraction techniques and categories, then we provide a general overview of meta-heuristic algorithms, its terminology, and desirable properties of evolutionary algorithms

Diminishing benefits of urban living for children and adolescents’ growth and development

Optimal growth and development in childhood and adolescence is crucial for lifelong health and well-being1–6. Here we used data from 2,325 population-based studies, with measurements of height and weight from 71 million participants, to report the height and body-mass index (BMI) of children and adolescents aged 5–19 years on the basis of rural and urban place of residence in 200 countries and territories from 1990 to 2020. In 1990, children and adolescents residing in cities were taller than their rural counterparts in all but a few high-income countries. By 2020, the urban height advantage became smaller in most countries, and in many high-income western countries it reversed into a small urban-based disadvantage. The exception was for boys in most countries in sub-Saharan Africa and in some countries in Oceania, south Asia and the region of central Asia, Middle East and north Africa. In these countries, successive cohorts of boys from rural places either did not gain height or possibly became shorter, and hence fell further behind their urban peers. The difference between the age-standardized mean BMI of children in urban and rural areas was <1.1 kg m–2 in the vast majority of countries. Within this small range, BMI increased slightly more in cities than in rural areas, except in south Asia, sub-Saharan Africa and some countries in central and eastern Europe. Our results show that in much of the world, the growth and developmental advantages of living in cities have diminished in the twenty-first century, whereas in much of sub-Saharan Africa they have amplified

Cotton in the new millennium: advances, economics, perceptions and problems

Cotton is the most significant natural fibre and has been a preferred choice of the textile industry and consumers since the industrial revolution began. The share of man-made fibres, both regenerated and synthetic fibres, has grown considerably in recent times but cotton production has also been on the rise and accounts for about half of the fibres used for apparel and textile goods. To cotton’s advantage, the premium attached to the presence of cotton fibre and the general positive consumer perception is well established, however, compared to commodity man-made fibres and high performance fibres, cotton has limitations in terms of its mechanical properties but can help to overcome moisture management issues that arise with performance apparel during active wear. This issue of Textile Progress aims to: i. Report on advances in cotton cultivation and processing as well as improvements to conventional cotton cultivation and ginning. The processing of cotton in the textile industry from fibre to finished fabric, cotton and its blends, and their applications in technical textiles are also covered. ii. Explore the economic impact of cotton in different parts of the world including an overview of global cotton trade. iii. Examine the environmental perception of cotton fibre and efforts in organic and genetically-modified (GM) cotton production. The topic of naturally-coloured cotton, post-consumer waste is covered and the environmental impacts of cotton cultivation and processing are discussed. Hazardous effects of cultivation, such as the extensive use of pesticides, insecticides and irrigation with fresh water, and consequences of the use of GM cotton and cotton fibres in general on the climate are summarised and the effects of cotton processing on workers are addressed. The potential hazards during cotton cultivation, processing and use are also included. iv. Examine how the properties of cotton textiles can be enhanced, for example, by improving wrinkle recovery and reducing the flammability of cotton fibre

Repositioning of the global epicentre of non-optimal cholesterol

High blood cholesterol is typically considered a feature of wealthy western countries1,2. However, dietary and behavioural determinants of blood cholesterol are changing rapidly throughout the world3 and countries are using lipid-lowering medications at varying rates. These changes can have distinct effects on the levels of high-density lipoprotein (HDL) cholesterol and non-HDL cholesterol, which have different effects on human health4,5. However, the trends of HDL and non-HDL cholesterol levels over time have not been previously reported in a global analysis. Here we pooled 1,127 population-based studies that measured blood lipids in 102.6 million individuals aged 18 years and older to estimate trends from 1980 to 2018 in mean total, non-HDL and HDL cholesterol levels for 200 countries. Globally, there was little change in total or non-HDL cholesterol from 1980 to 2018. This was a net effect of increases in low- and middle-income countries, especially in east and southeast Asia, and decreases in high-income western countries, especially those in northwestern Europe, and in central and eastern Europe. As a result, countries with the highest level of non-HDL cholesterol—which is a marker of cardiovascular risk—changed from those in western Europe such as Belgium, Finland, Greenland, Iceland, Norway, Sweden, Switzerland and Malta in 1980 to those in Asia and the Pacific, such as Tokelau, Malaysia, The Philippines and Thailand. In 2017, high non-HDL cholesterol was responsible for an estimated 3.9 million (95% credible interval 3.7 million–4.2 million) worldwide deaths, half of which occurred in east, southeast and south Asia. The global repositioning of lipid-related risk, with non-optimal cholesterol shifting from a distinct feature of high-income countries in northwestern Europe, north America and Australasia to one that affects countries in east and southeast Asia and Oceania should motivate the use of population-based policies and personal interventions to improve nutrition and enhance access to treatment throughout the world