Lattice effects and current reversal in superconducting ratchets

Competition between the vortex lattice and a lattice of asymmetric artificial defects is shown to play a crucial role in ratchet experiments in superconducting films. We present a novel and collective mechanism for current reversal based on a reconfiguration of the vortex lattice. In contrast to previous models of vortex current reversal, the mechanism is based on the global response of the vortex lattice to external forces.Comment: 12 pages, 7 figure

Identificación y descripción de procesos reales en la universidad EAFIT bajo la perspectiva de sistemas dinámicos

Este trabajo está enfocado hacia el estudio de los sistemas dinámicos en la universidad EAFIT, a partir de visitas realizadas a los laboratorios de la universidad, haciendo una breve descripción de máquinas y procesos bajo la teoría de los sistemas dinámicos, teniendo en cuenta las características más importantes de un sistema dinámico como lo son: entrada, salidas, posibles perturbaciones. Dejando así un importante apoyo para quienes después se puedan interesar tanto en describir como llegar a un posible control de algunos de los procesos, dada la necesidad en la universidad por personas interesadas en este tipo de estudios, pues en las visitas realizadas a dichos laboratorios se pudo observar la falta de interés tanto de los estudiantes como de la misma universidad para realizar un mejor estudio de los procesos, viendo así como muchos de los procesos no son desarrollados de la mejor manera. Hecha la descripción de los procesos, se procederá a un estudio mucho más detallado de dos de estos procesos reales empezando con la modelación y simulación del mismo, bajo la teoría de los sistemas lineales usando como herramienta de simulación MATLAB SIMULINK

Spectropolarimetric multi line analysis of stellar magnetic fields

In this paper we study the feasibility of inferring the magnetic field from polarized multi-line spectra using two methods: The pseudo line approach and The PCA-ZDI approach. We use multi-line techniques, meaning that all the lines of a stellar spectrum contribute to obtain a polarization signature. The use of multiple lines dramatically increases the signal to noise ratio of these polarizations signatures. Using one technique, the pseudo-line approach, we construct the pseudo-line as the mean profile of all the individual lines. The other technique, the PCA-ZDI approach proposed recently by Semel et al. (2006) for the detection of polarized signals, combines Principle Components Analysis (PCA) and the Zeeman Do ppler Imaging technique (ZDI). This new method has a main advantage: the polarized signature is extracted using cross correlations between the stellar spectra nd functions containing the polarization properties of each line. These functions are the principal components of a database of synthetic spectra. The synthesis of the spectra of the database are obtained using the radiative transfer equations in LTE. The profiles built with the PCA-ZDI technique are denominated Multi-Zeeman-Signatures. The construction of the pseudo line as well as the Multi-Zeeman-Signatures is a powerful tool in the study of stellar and solar magnetic fields. The information of the physical parameters that governs the line formation is contained in the final polarized profiles. In particular, using inversion codes, we have shown that the magnetic field vector can be properly inferred with both approaches despite the magnetic field regime.Comment: Accepted for publication in Astronomy and Astrophysic

Energy Storage Systems for Electric Vehicles: Performance Comparison based on a Simple Equivalent Circuit and Experimental Tests

The decision to select the most suitable type of energy storage system for an electric vehicle is always difficult, since many conditionings must be taken into account. Sometimes, this study can be made by means of complex mathematical models which represent the behavior of a battery, ultracapacitor or some other devices. However, these models are usually too dependent on parameters that are not easily available, which usually results in nonrealistic results. Besides, the more accurate the model, the more specific it needs to be, which becomes an issue when comparing systems of different nature. This paper proposes a practical methodology to compare different energy storage technologies. This is done by means of a linear approach of an equivalent circuit based on laboratory tests. Via these tests, the internal resistance and the self-discharge rate are evaluated, making it possible to compare different energy storage systems regardless their technology. Rather simple testing equipment is sufficient to give a comparative idea of the differences between each system, concerning issues such as efficiency, heating and self-discharge, when operating under a certain scenario. The proposed methodology is applied to four energy storage systems of different nature for the sake of illustration

Ammonia Borane Dehydrogenation Promoted by a Pincer-Square-Planar Rhodium(I) Monohydride: A Stepwise Hydrogen Transfer from the Substrate to the Catalyst

The pincer d8-monohydride complex RhH{xant(PiPr2)2} (xant(PiPr2)2 = 9, 9-dimethyl-4, 5-bis(diisopropylphosphino)xanthene) promotes the release of 1 equiv of hydrogen from H3BNH3 and H3BNHMe2 with TOF50% values of 3150 and 1725 h–1, to afford [BH2NH2]n and [BH2NMe2]2 and the tandem ammonia borane dehydrogenation–cyclohexene hydrogenation. DFT calculations on the ammonia borane dehydrogenation suggest that the process takes place by means of cis-¿2-PP-species, through four stages including: (i) Shimoi-type coordination of ammonia borane, (ii) homolytic addition of the coordinated H–B bond to afford a five-coordinate dihydride-boryl-rhodium(III) intermediate, (iii) reductive intramolecular proton transfer from the NH3 group to one of the hydride ligands, and (iv) release of H2 from the resulting square-planar hydride dihydrogen rhodium(I) intermediate

Crossed-ratchet effects and domain wall geometrical pinning

The motion of a domain wall in a two dimensional medium is studied taking into account the internal elastic degrees of freedom of the wall and geometrical pinning produced both by holes and sample boundaries. This study is used to analyze the geometrical conditions needed for optimizing crossed ratchet effects in periodic rectangular arrays of asymmetric holes, recently observed experimentally in patterned ferromagnetic films. Geometrical calculations and numerical simulations have been used to obtain the anisotropic critical fields for depinning flat and kinked walls in rectangular arrays of triangles. The aim is to show with a generic elastic model for interfaces how to build a rectifier able to display crossed ratchet effects or effective potential landscapes for controlling the motion of interfaces or invasion fronts.Comment: 13 pages, 18 figure

The role of temperature in the magnetic irreversibility of type-I Pb superconductors

Evidence of how temperature takes part in the magnetic irreversibility in the intermediate state of a cylinder and various disks of pure type-I superconducting lead is presented. Isothermal measurements of first magnetization curves and magnetic hysteresis cycles are analyzed in a reduced representation that defines an equilibrium state for flux penetration in all the samples and reveals that flux expulsion depends on temperature in the disks but not in the cylinder. The magnetic field at which irreversibility sets in along the descending branch of the hysteresis cycle and the remnant magnetization at zero field are found to decrease with temperature in the disks. The contributions to irreversibility of the geometrical barrier and the energy minima associated to stress defects that act as pinning centers on normal-superconductor interfaces are discussed. The differences observed among the disks are ascribed to the diverse nature of the stress defects in each sample. The pinning barriers are suggested to decrease with the magnetic field to account for these results