Synthesis of as-grown superconducting MgB_2 thin films by molecular beam epitaxy in UHV conditions

As-grown superconducting MgB_2 thin films have been grown on SrTiO_3(001), MgO(001), and Al_2O_3(0001) substrates by a molecular beam epitaxy (MBE) method with novel co-evaporation conditions of low deposition rate in ultra-high vacuum. The structural and physical properties of the films were studied by RHEED, XRD, electrical resistivity measurements, and SQUID magnetometer. The RHEED patterns indicate three-dimensional growth for MgB_2. The highest T_c determined by resistivity measurement was about 36K in these samples. And a clear Meissner effect below T_c was observed using magnetic susceptibility measurement. We will discuss the influence of B buffer layer on the structural and physical properties.Comment: 9 pages with 4 figures, ISS2003 proceedin

Lamina Densa Malformation Involved in Histogenesis of Primary Localized Cutaneous Amyloidosis

Skin lesions of lichenoid amyloidosis and macular amyloidosis were immunohistochemically investigated using five monoclonal antibodies against basement membrane zone (BMZ) components. A hemidesmosomal component did not contribute to amyloid deposits, but components of the lamina densa and anchoring fibrils were associated with amyloid deposits in the uppermost dermis. Immunoelectron microscopy revealed that these BMZ components were not only aggregated in the BMZ and dermis, but were also involved in the individual amyloid islets. The lamina densa was disrupted in the interface areas just above the amyloid deposits, where cytoplasm of the basal cells directly faced the aggregate of amyloid filaments. Aggregates of some BMZ components were continuous to the amyloid islets from the lamina densa area. These findings suggest that a lamina densa malformation is involved in amyloid production in the interface of the BMZ, and support the secretion theory rather than the fibrillar body theory of amyloidogenesis in these types of primary localized cutaneous amyloidosis

The velocity distribution of nearby stars from Hipparcos data I. The significance of the moving groups

We present a three-dimensional reconstruction of the velocity distribution of nearby stars (<~ 100 pc) using a maximum likelihood density estimation technique applied to the two-dimensional tangential velocities of stars. The underlying distribution is modeled as a mixture of Gaussian components. The algorithm reconstructs the error-deconvolved distribution function, even when the individual stars have unique error and missing-data properties. We apply this technique to the tangential velocity measurements from a kinematically unbiased sample of 11,865 main sequence stars observed by the Hipparcos satellite. We explore various methods for validating the complexity of the resulting velocity distribution function, including criteria based on Bayesian model selection and how accurately our reconstruction predicts the radial velocities of a sample of stars from the Geneva-Copenhagen survey (GCS). Using this very conservative external validation test based on the GCS, we find that there is little evidence for structure in the distribution function beyond the moving groups established prior to the Hipparcos mission. This is in sharp contrast with internal tests performed here and in previous analyses, which point consistently to maximal structure in the velocity distribution. We quantify the information content of the radial velocity measurements and find that the mean amount of new information gained from a radial velocity measurement of a single star is significant. This argues for complementary radial velocity surveys to upcoming astrometric surveys

In situ epitaxial MgB2 thin films for superconducting electronics

A thin film technology compatible with multilayer device fabrication is critical for exploring the potential of the 39-K superconductor magnesium diboride for superconducting electronics. Using a Hybrid Physical-Chemical Vapor Deposition (HPCVD) process, it is shown that the high Mg vapor pressure necessary to keep the MgB$_2$ phase thermodynamically stable can be achieved for the {\it in situ} growth of MgB$_2$ thin films. The films grow epitaxially on (0001) sapphire and (0001) 4H-SiC substrates and show a bulk-like $T_c$ of 39 K, a $J_c$(4.2K) of $1.2 \times 10^7$ A/cm$^2$ in zero field, and a $H_{c2}(0)$ of 29.2 T in parallel magnetic field. The surface is smooth with a root-mean-square roughness of 2.5 nm for MgB$_2$ films on SiC. This deposition method opens tremendous opportunities for superconducting electronics using MgB$_2$

Preparation, characterization and catalytic behavior for propanepartial oxidation of Ga-promoted MoVTeO catalysts

[EN] Two sets of Ga-promoted MoVTeO catalysts were synthesized hydrothermally and heat-treated at 600 degrees C in N-2: (i) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60/0.17/x (x=0-0.12) (A-series) and (ii) materials prepared from gels with Mo/V/Te/Ga atomic ratios of 1/0.60-x/0.17/x (x=0.15 or 0.25) (B-series). In addition, a Ga-containing MoVTeO catalyst was also prepared from M1-containing MoVTeO material by impregnation with aqueous solution of gallium and heat-treated at 450 degrees C in N-2. Catalysts were characterized by means of powder XRD, TEM, Raman spectroscopy, NH3-TPD and XPS and tested in the partial oxidation of propane. The results showed that the addition of small amount of gallium significantly increase the selectivity to acrylic acid (AA) at low propane conversion. However, at high propane conversion, the selectivity to AA strongly depends on both the catalyst composition and the gallium incorporation method. The higher selectivity to acrylic acid over Ga-containing MoVTeO catalysts has been related to: (i) structural changes in the M1 phase by the incorporation of Ga3+ into the octahedral structural framework and/or (ii) incorporation of Ga3+ species on the catalyst surface thus modifying catalysts acid properties. (C) 2014 Elsevier B.V. All rights reserved.Financial support from DGICYT in Spain (Project CTQ2012-37925-C03-1 and Program Severo Ochoa SEV-2012-0267) is gratefully acknowledged. EGG acknowledges finantial support through spanish project MAT2010-19837-C06-05 and the ICTS-Microscopia Electronica in Madrid for facilities.Hernández Morejudo, S.; Massó Ramírez, A.; García-González, E.; Concepción Heydorn, P.; López Nieto, JM. (2015). Preparation, characterization and catalytic behavior for propanepartial oxidation of Ga-promoted MoVTeO catalysts. Applied Catalysis A: General. 504:51-61. https://doi.org/10.1016/j.apcata.2014.12.039S516150

Measuring the impact and distress of health problems from the individual's perspective: development of the Perceived Impact of Problem Profile (PIPP)

BACKGROUND: The aim of this study was to develop and conduct preliminary validation of the Perceived Impact of Problem Profile (PIPP). Based on the biopsychosocial model of health and functioning, the PIPP was intended as a generic research and clinical measurement tool to assess the impact and distress of health conditions from the individuals' perspective. The ICF classification system was used to guide the structure of the PIPP with subscales included to assess impact on self-care, mobility, participation, relationships and psychological well-being. While the ICF focuses on the classification of objective health and health related status, the PIPP broadens this focus to address the individuals' subjective experience of their health condition. METHODS: An item pool of 23 items assessing both impact and distress on five key domains was generated. These were administered to 169 adults with mobility impairment. Rasch analysis using RUMM2020 was conducted to assess the psychometric properties of each set of items. Preliminary construct validation of the PIPP was performed using the EQ5D. RESULTS: For both the Impact and Distress scales of the PIPP, the five subscales (Self-care, Mobility, Participation, Relationships, and Psychological Well-being) showed adequate psychometric properties, demonstrating fit to the Rasch model. All subscales showed adequate person separation reliability and no evidence of differential item functioning for sex, age, educational level or rural vs urban residence. Preliminary validity testing using the EQ5D items provided support for the subscales. CONCLUSION: This preliminary study, using a sample of adults with mobility impairment, provides support for the psychometric properties of the PIPP as a potential clinical and research measurement tool. The PIPP provides a brief, but comprehensive means to assess the key ICF components, focusing on the individuals' perspective of the impact and distress caused by their health condition. Further validation of its use across different health conditions and varying cultural settings is required

A Three-Component Gene Expression System and Its Application for Inducible Flavonoid Overproduction in Transgenic Arabidopsis thaliana

Inducible gene expression is a powerful tool to study and engineer genes whose overexpression could be detrimental for the host organisms. However, only limited systems have been adopted in plant biotechnology. We have developed an osmotically inducible system using three components of plant origin, RD29a (Responsive to Dehydration 29A) promoter, CBF3 (C-repeat Binding Factor 3) transcription factor and cpl1-2 (CTD phosphatase-like 1) mutation. The osmotic stress responsible RD29a promoter contains the CBF3 binding sites and thus RD29A-CBF3 feedforward cassette enhances induction of RD29a promoter under stress. The cpl1-2 mutation in a host repressor CPL1 promotes stress responsible RD29a promoter expression. The efficacy of this system was tested using PAP1 (Production of Anthocyanin Pigment 1) transgene, a model transcription factor that regulates the anthocyanin pathway in Arabidopsis. While transgenic plants with only one or two of three components did not reproducibly accumulate anthocyanin pigments above the control level, transgenic cpl1 plants containing homozygous RD29a-PAP1 and RD29a-CBF3 transgenes produced 30-fold higher level of total anthocyanins than control plants upon cold treatment. Growth retardation and phytochemical production of transgenic plants were minimum under normal conditions. The flavonoid profile in cold-induced transgenic plants was determined by LC/MS/MS, which resembled that of previously reported pap1-D plants but enriched for kaempferol derivatives. These results establish the functionality of the inducible three-component gene expression system in plant metabolic engineering. Furthermore, we show that PAP1 and environmental signals synergistically regulate the flavonoid pathway to produce a unique flavonoid blend that has not been produced by PAP1 overexpression or cold treatment alone

Characterization of a novel PTEN mutation in MDA-MB-453 breast carcinoma cell line

<p>Abstract</p> <p>Background</p> <p>Cowden Syndrome (CS) patients with germ line point mutations in the <it>PTEN </it>gene are at high risk for developing breast cancer. It is believed that cells harboring these mutant <it>PTEN </it>alleles are predisposed to malignant conversion. This article will characterize the biochemical and biological properties of a mutant PTEN protein found in a commonly used metastatic breast cancer cell line.</p> <p>Methods</p> <p>The expression of PTEN in human breast carcinoma cell lines was evaluated by Western blotting analysis. Cell line MDA-MB-453 was selected for further analysis. Mutation analysis of the <it>PTEN </it>gene was carried out using DNA isolated from MDA-MB-453. Site-directed mutagenesis was used to generate a PTEN E307K mutant cDNA and ectopic expressed in PC3, U87MG, MCF7 and <it>Pten</it>^-/-mouse embryo fibroblasts (MEFS). Histidine (His)-tagged PTEN fusion protein was generated in <it>Sf9 </it>baculovirus expression system. Lipid phosphatase and ubiquitination assays were carried out to characterize the biochemical properties of PTEN E307K mutant. The intracellular localization of PTEN E307K was determined by subcellular fractionation experiments. The ability of PTEN E307K to alter cell growth, migration and apoptosis was analyzed in multiple PTEN-null cell lines.</p> <p>Results</p> <p>We found a mutation in the <it>PTEN </it>gene at codon 307 in MDA-MB-453 cell line. The glutamate (E) to lysine (K) substitution rendered the mutant protein to migrate with a faster mobility on SDS-PAGE gels. Biochemically, the PTEN E307K mutant displayed similar lipid phosphatase and growth suppressing activities when compared to wild-type (WT) protein. However, the PTEN E307K mutant was present at higher levels in the membrane fraction and suppressed Akt activation to a greater extent than the WT protein. Additionally, the PTEN E307K mutant was polyubiquitinated to a greater extent by NEDD4-1 and displayed reduced nuclear localization. Finally, the PTEN E307K mutant failed to confer chemosensitivity to cisplatinum when re-expressed in <it>Pten</it>^-/-MEFS.</p> <p>Conclusions</p> <p>Mutation at codon 307 in PTEN C2 loop alters its subcellular distribution with greater membrane localization while being excluded from the cell nucleus. This mutation may predispose breast epithelial cells to malignant transformation. Also, tumor cells harboring this mutation may be less susceptible to the cytotoxic effects of chemotherapeutics.</p