Investigation of Changes in Mechanical Properties and Microstructures of Mild Steel Joint by Oxy-Hydrogen Welding

In this paper, in order to see weldability behaviour of mild steels joint by the oxy-hydrogen welding technique, an investigation of changes in mechanical properties and microstructures of mild steel is carried out. The specimens with 1.5 mm thickness and 125 mm length are welded by using both the oxyhydrogen and oxy-acetylene gases. Microstructural analysis is carried out on the cross sectional area of the welding zone in order to compare the changes in weld metals and the heat affected zones in terms of the welding gases. Experimental results of the tensile strength and microhardness obtained with mechanical tests show that samples welded with oxy-acetylene exhibited 10% higher yield strength than that of the samples welded with oxy-hydrogen. However, the oxy-hydrogen welding technique can be used as an alternative to the oxy-acetylene welding, since it has advantageous of being clean and economic.С целью выяснения качества сварного шва на малоуглеродистой стали, полученного водород-кислородной сваркой, проведено исследование изменений механических свойств и микроструктуры данного типа стали. Образцы толщиной 1,5 мм и длиной 125 мм сваривались как водород-кислородной, так и ацетиленокислородной сваркой. Был проведён микроструктурный анализ поперечного сечения зоны сварки с целью сравнения изменений в металле шва и зоне термического влияния в зависимости от сварочного газа. Экспериментальные результаты по пределу прочности при растяжении и микротвёрдости, полученные при механических испытаниях, показали, что образцы, сваренные ацетиленокислородной сваркой, имеют прочность при растяжении на 10% выше, чем водород-кислородной. Однако водород-кислородная сварка может быть использована как альтернатива ацетиленокислородной сварке, так как она имеет преимущества по чистоте и экономичности.З метою з’ясування якости зварюваного шва на маловуглецевій сталі, виробленого водневокисневим зварюванням, виконано дослідження змін механічних властивостей і мікроструктури даного типу сталі. Зразки товщиною у 1,5 мм та довжиною у 125 мм зварювалися як водневокисневим, так і ацетиленокисневим зварюванням. Виконано мікроструктурну аналізу поперечного перерізу зони зварювання з метою порівняння змін у металі шва та зоні термічного впливу в залежності від зварювального газу. Експериментальні результати стосовно границі міцности при розтягу та мікротвердости, одержані під час механічних випробувань, показали, що зразки, зварені ацетиленокисневим зварюванням, мають міцність при розтягу, на 10% вищу, ніж зварені водневокисневою газовою сумішшю. Однак водневокисневе зварювання може бути використано як альтернатива ацетиленокисневому зварюванню завдяки його перевазі за чистотою та економічністю

Biological Evaluation and Phytochemical Profiling of Some Lichen Species

Lichens are a symbiotic relationship between a fungus and a photosynthetic partner. Chemical characterization and bioactive potentials (antiproliferative, antioxidant, and antibacterial) of five lichen species (Evernia prunastri, Platismatia glauca, Pseudevernia furfuracea, Ramalina fastigiata, and Ramalina farinacea) were assessed. Five lichen metabolites (usnic acid, atranorin, stictic acid, evernic acid, and fumarprotocetraric acid) were analyzed by HPLC-DAD. E. prunastri was noteworthy evernic acid source. Antiproliferative activity was evaluated using human breast adenocarcinoma (MCF-7) and human hepatocellular carcinoma (HepG2/C3A) cell lines. The strongest activity was observed for P. glauca against HepG2/C3A, while the only lichen species that induced cytotoxicity against MCF-7 cell line was P. furfuracea. The highest antioxidant activity was also obtained with P. furfuracea. E. prunastri and R. farinaceae had the highest phenolic and flavonoid contents, respectively. Antibacterial activities of the extracts were determined against ten pathogenic bacteria. The most effective antibacterial agent was methanol extract of R. fastigiata. Our findings have revealed the pharmaceutical potentials of tested lichen species

The development of a stakeholder-based scale for measuring corporate social responsibility in the banking industry.

ABSTRACT: Research on corporate social responsibility (CSR) has notably increased in recent years and many scales for measuring CSR image have been developed in academic literature. Due to the contextual character recognized in the implementation of CSR strategies, in this paper a new scale based on stakeholder theory is developed to evaluate customers’ perception regarding the CSR performance of their banking service providers. The proposal of reliable measurement tools for evaluating customers’ perception is especially relevant for companies because of their significant role in influencing the design and implementation of corporate strategies. Results demonstrate the reliability and validity of this new scale in two different samples. In the banking industry, CSR includes corporate responsibilities toward customers, shareholders, employees, society, and all legal and ethical requirements of banking institutions. Nevertheless, different kinds of banking institutions have specific CSR images, which reveal different strategic approaches to CSR

Salicylic acid functionalized silica-coated magnetite nanoparticles for solid phase extraction and preconcentration of some heavy metal ions from various real samples

A method for the preconcentration of trace heavy metal ions in environmental samples has been reported. The presented method is based on the sorption of Cu(II), Cd(II), Ni(II) and Cr(III) ions with salicylic acid as respective chelate on silica-coated magnetite nanoparticles. Prepared adsorbent was characterized by XRD, SEM, BET and FT-IR measurements. The metals content of the sorbed complexes are eluted using 4.0 mL of 1.0 mol L-1 nitric acid. The influences of the analytical parameters including pH, amount of solid phase and condition of eluting solution, the effects of matrix ions on the retention of the analytes were examined. The accuracy and precision of suggested method were tested by analyzing of certified reference materials. The detection limits (3Sb/m, N = 8) for Cu(II), Cd(II), Ni(II) and Cr(III) ions are 0.22, 0.11, 0.27 and 0.15 μg L-1, respectively, and the maximum preconcentration factor is 200. The method was successfully applied to the evaluation of these trace and toxic metals in various waters, foods and other samples

Prevalence of hip dislocation among children with cerebral palsy in regions with and without a surveillance programme: a cross sectional study in Sweden and Norway

<p>Abstract</p> <p>Background</p> <p>Hip dislocation is a serious complication among children with cerebral palsy (CP). The aim of this study was to compare the prevalence of hip dislocation among children with CP in an area providing regular care with an area providing hip surveillance services.</p> <p>Methods</p> <p>This is a cross-sectional study in seven Norwegian counties providing regular care and one Swedish healthcare region where a hip surveillance programme was introduced in 1994. Data were provided by the Norwegian Cerebral Palsy Register and the CP Register in Southern Sweden. Children born 1996 - 2003 with moderate to severe CP, defined as Gross Motor Classification System (GMFCS) levels III - V, were included. In all, 119 Norwegian and 136 Swedish children fulfilled the criteria. In Norway, data on hip operations and radiographs of the hips were collected from medical records, while these data are collected routinely in the Swedish register. The hip migration percentage was measured on the recent radiographs. Hip dislocation was defined as a migration percent of 100%.</p> <p>Results</p> <p>The proportion of children at GMFCS levels III - V was 34% in the Norwegian and 38% in the Swedish population. In the Norwegian population, hip dislocation was diagnosed in 18 children (15.1%; CI: 9.8 - 22.6) compared with only one child (0.7%; 95% CI: 0.01 - 4.0) in Southern Sweden (p = < 0.001). Hip surgery was performed in 53 (44.5%) of the Norwegian children and in 43 (32%) of the Swedish children (p = 0.03). The total number of hip operations was 65 in Norway and 63 in Sweden. Norwegian children were first operated at a mean age of 7.6 years (SD: 2.9) compared with 5.7 years (SD: 2.3) in Sweden (p = 0.001).</p> <p>Conclusions</p> <p>The surveillance programme reduced the number of hip dislocations and the proportion of children undergoing hip surgery was lower. However, with the surveillance programme the first operation was performed at a younger age. Our results strongly support the effectiveness of a specifically designed follow-up programme for the prevention of hip dislocation in children with CP.</p

Aberrant methylation of the Adenomatous Polyposis Coli (APC) gene promoter is associated with the inflammatory breast cancer phenotype

Aberrant methylation of the adenomatous polyposis coli (APC) gene promoter occurs in about 40% of breast tumours and has been correlated with reduced APC protein levels. To what extent epigenetic alterations of the APC gene may differ according to specific breast cancer phenotypes, remains to be elucidated. Our aim was to explore the role of APC methylation in the inflammatory breast cancer (IBC) phenotype. The status of APC gene promoter hypermethylation was investigated in DNA from normal breast tissues, IBC and non-IBC by both conventional and real-time quantitative methylation-specific PCR (MSP). APC methylation levels were compared with APC mRNA and protein levels. Hypermethylation of the APC gene promoter was present in 71% of IBC samples (n=21) and 43% of non-IBC samples (n=30) by conventional MSP (P=0.047). The APC gene also showed an increased frequency of high methylation levels in IBC (in 74% of cases, n=19) vs non-IBC (in 46% of cases, n=35) using a qMSP assay (P=0.048). We observed no significant association between APC methylation levels by qMSP and APC mRNA or protein expression levels. In conclusion, for the first time, we report the association of aberrant methylation of the APC gene promoter with the IBC phenotype, which might be of biological and clinical importance

Systematic evaluation of genome-wide methylated DNA enrichment using a CpG island array

<p>Abstract</p> <p>Background</p> <p>Recent progress in high-throughput technologies has greatly contributed to the development of DNA methylation profiling. Although there are several reports that describe methylome detection of whole genome bisulfite sequencing, the high cost and heavy demand on bioinformatics analysis prevents its extensive application. Thus, current strategies for the study of mammalian DNA methylomes is still based primarily on genome-wide methylated DNA enrichment combined with DNA microarray detection or sequencing. Methylated DNA enrichment is a key step in a microarray based genome-wide methylation profiling study, and even for future high-throughput sequencing based methylome analysis.</p> <p>Results</p> <p>In order to evaluate the sensitivity and accuracy of methylated DNA enrichment, we investigated and optimized a number of important parameters to improve the performance of several enrichment assays, including differential methylation hybridization (DMH), microarray-based methylation assessment of single samples (MMASS), and methylated DNA immunoprecipitation (MeDIP). With advantages and disadvantages unique to each approach, we found that assays based on methylation-sensitive enzyme digestion and those based on immunoprecipitation detected different methylated DNA fragments, indicating that they are complementary in their relative ability to detect methylation differences.</p> <p>Conclusions</p> <p>Our study provides the first comprehensive evaluation for widely used methodologies for methylated DNA enrichment, and could be helpful for developing a cost effective approach for DNA methylation profiling.</p