Numerical modeling of spalling brittle fracture along the (0001) plane in HCP-single crystals under shock loading

Numerical modeling of spalling brittle fracture along the (0001) plane in a zinc single crystal under shock loading by an aluminum projectile was performed in the work. Numerical modeling was carried out by the finite element method in a three-dimensional statement. The mathematical model allows to take into account the anisotropy of bulk compressibility in a single crystal of zinc, auxeticity, anisotropy of the propagation velocities of elastic longitudinal and volume waves. Stresses are determined on the basis of a comparison of velocity profiles of the rear surfaces of targets from zinc single crystal in mutually perpendicular directions when it is destroyed along the (0001) plane in natural experiments and numerical simulation

Modelling of the deformation of highly porous metals and alloys under dynamic loading

The study represents the analysis of numerical simulation of the failure of aluminum targets made of highly porous or solid 2024 alloy under dynamic loading. The calculations employed the finite elements method in three-dimensional formulation with the use of proprietary programs. The article presents the results of the numerical simulation of Taylor’s test for the projectile made of highly porous aluminum 2024 alloy at the velocities of 75 to 175 m/s. These results are in a good agreement with the results of the experiments. The peculiarities of the destruction of highly porous aluminum targets are shown

Numerical simulation of the fractures of anisotropic materials characterized by the high degree of anisotropy of elongation at break

The failure criteria of anisotropic materials, the criteria being expressed via deformations, are rarely applied in practice, and are usually used for low-ductility materials. Another situation involves the simulation of failures in materials with the high anisotropy of mechanical properties and that suffer elastic-brittle fracture. For such materials the failure criteria are formulated using ultimate strains and strain tensor invariants. For simulating the fractures of materials that are characterized by the anisotropy of strength properties, the failure criteria are applied with the critical values of stresses and strains, as well as their intensities. Using the value of cumulative plastic strain as a failure criterion does reflect the anisotropy of elastic and plastic properties of a material, but it does not reflect that of the strength properties. The application of this method allows accounting the total plastic strain induced by tension and compression in the conditions of the wave strain of targets during their impact loading

Atmospheric aerosols at the Pierre Auger Observatory and environmental implications

The Pierre Auger Observatory detects the highest energy cosmic rays. Calorimetric measurements of extensive air showers induced by cosmic rays are performed with a fluorescence detector. Thus, one of the main challenges is the atmospheric monitoring, especially for aerosols in suspension in the atmosphere. Several methods are described which have been developed to measure the aerosol optical depth profile and aerosol phase function, using lasers and other light sources as recorded by the fluorescence detector. The origin of atmospheric aerosols traveling through the Auger site is also presented, highlighting the effect of surrounding areas to atmospheric properties. In the aim to extend the Pierre Auger Observatory to an atmospheric research platform, a discussion about a collaborative project is presented.Comment: Regular Article, 16 pages, 12 figure

South African EUCAARI measurements: seasonal variation of trace gases and aerosol optical properties

In this paper we introduce new in situ observations of atmospheric aerosols, especially chemical composition, physical and optical properties, on the eastern brink of the heavily polluted Highveld area in South Africa. During the observation period between 11 February 2009 and 31 January 2011, the mean particle number concentration (size range 10–840 nm) was 6310 cm−3 and the estimated volume of sub-10 μm particles 9.3 μm3 m−3. The aerosol absorption and scattering coefficients at 637 nm were 8.3Mm−1 and 49.5Mm−1, respectively. The mean single-scattering albedo at 637 nm was 0.84 and the A° ngstro¨m exponent of scattering was 1.5 over the wavelength range 450–635 nm. The mean O3, SO2, NOx and H2S-concentrations were 37.1, 11.5, 15.1 and 3.2 ppb, respectively. The observed range of concentrations was large and attributed to the seasonal variation of sources and regional meteorological effects, especially the anticyclonic re-circulation and strong winter-time inversions. In a global context, the levels of gases and particulates were typical for continental sites with strong anthropogenic influence, but clearly lower than the most polluted areas of southeastern Asia. Of all pollutants observed at the site, ozone is the most likely to have adverse environmental effects, as the concentrations were high also during the growing season. The measurements presented here will help to close existing gaps in the ground-based global atmosphere observation system, since very little long-term data of this nature is available for southern Africa.JRC.H.7-Climate Risk Managemen

The effect of meteorological conditions and atmospheric composition in the occurrence and development of new particle formation (NPF) events in Europe

Although new particle formation (NPF) events have been studied extensively for some decades, the mechanisms that drive their occurrence and development are yet to be fully elucidated. Laboratory studies have done much to elucidate the molecular processes involved in nucleation, but this knowledge has yet to be conclusively linked to NPF events in the atmosphere. There is great difficulty in successful application of the results from laboratory studies to real atmospheric conditions due to the diversity of atmospheric conditions and observations found, as NPF events occur almost everywhere in the world without always following a clearly defined trend of frequency, seasonality, atmospheric conditions, or event development. The present study seeks common features in nucleation events by applying a binned linear regression over an extensive dataset from 16 sites of various types (combined dataset of 85 years from rural and urban backgrounds as well as roadside sites) in Europe. At most sites, a clear positive relation with the frequency of NPF events is found between the solar radiation intensity (up to R-2 = 0.98), temperature (up to R-2 = 0.98), and atmospheric pressure (up to R-2 = 0.97), while relative humidity (RH) presents a negative relation (up to R-2 = 0.95) with NPF event frequency, though exceptions were found among the sites for all the variables studied. Wind speed presents a less consistent relationship, which appears to be heavily affected by local conditions. While some meteorological variables (such as the solar radiation intensity and RH) appear to have a crucial effect on the occurrence and characteristics of NPF events, especially at rural sites, it appears that their role becomes less marked at higher average values. The analysis of chemical composition data presents interesting results. Concentrations of almost all chemical compounds studied (apart from O-3) and the condensation sink (CS) have a negative relationship with NPF event frequency, though areas with higher average concentrations of SO2 had higher NPF event frequency. Particulate organic carbon (OC), volatile organic compounds (VOCs), and particulate-phase sulfate consistently had a positive relation with the growth rate of the newly formed particles. As with some meteorological variables, it appears that at increased concentrations of pollutants or the CS, their influence upon NPF frequency is reduced.Peer reviewe

A phenomenology of new particle formation (NPF) at 13 European sites

New particle formation (NPF) events occur almost everywhere in the world and can play an important role as a particle source. The frequency and characteristics of NPF events vary spatially, and this variability is yet to be fully understood. In the present study, long-term particle size distribution datasets (minimum of 3 years) from 13 sites of various land uses and climates from across Europe were studied, and NPF events, deriving from secondary formation and not traffic-related nucleation, were extracted and analysed. The frequency of NPF events was consistently found to be higher at rural background sites, while the growth and formation rates of newly formed particles were higher at roadsides (though in many cases differences between the sites were small), underlining the importance of the abundance of condensable compounds of anthropogenic origin found there. The growth rate was higher in summer at all rural background sites studied. The urban background sites presented the highest uncertainty due to greater variability compared to the other two types of site. The origin of incoming air masses and the specific conditions associated with them greatly affect the characteristics of NPF events. In general, cleaner air masses present higher probability for NPF events, while the more polluted ones show higher growth rates. However, different patterns of NPF events were found, even at sites in close proximity (<ĝ€¯200ĝ€¯km), due to the different local conditions at each site. Region-wide events were also studied and were found to be associated with the same conditions as local events, although some variability was found which was associated with the different seasonality of the events at two neighbouring sites. NPF events were responsible for an increase in the number concentration of ultrafine particles of more than 400ĝ€¯% at rural background sites on the day of their occurrence. The degree of enhancement was less at urban sites due to the increased contribution of other sources within the urban environment. It is evident that, while some variables (such as solar radiation intensity, relative humidity, or the concentrations of specific pollutants) appear to have a similar influence on NPF events across all sites, it is impossible to predict the characteristics of NPF events at a site using just these variables, due to the crucial role of local conditions. © Author(s) 2021

A phenomenology of new particle formation (NPF) at 13 European sites

New particle formation (NPF) events occur almost everywhere in the world and can play an important role as a particle source. The frequency and characteristics of NPF events vary spatially, and this variability is yet to be fully understood. In the present study, long-term particle size distribution datasets (minimum of 3 years) from 13 sites of various land uses and climates from across Europe were studied, and NPF events, deriving from secondary formation and not traffic-related nucleation, were extracted and analysed. The frequency of NPF events was consistently found to be higher at rural background sites, while the growth and formation rates of newly formed particles were higher at roadsides (though in many cases differences between the sites were small), underlining the importance of the abundance of condensable compounds of anthropogenic origin found there. The growth rate was higher in summer at all rural background sites studied. The urban background sites presented the highest uncertainty due to greater variability compared to the other two types of site. The origin of incoming air masses and the specific conditions associated with them greatly affect the characteristics of NPF events. In general, cleaner air masses present higher probability for NPF events, while the more polluted ones show higher growth rates. However, different patterns of NPF events were found, even at sites in close proximity (< 200 km), due to the different local conditions at each site. Region-wide events were also studied and were found to be associated with the same conditions as local events, although some variability was found which was associated with the different seasonality of the events at two neighbouring sites. NPF events were responsible for an increase in the number concentration of ultrafine particles of more than 400% at rural background sites on the day of their occurrence. The degree of enhancement was less at urban sites due to the increased contribution of other sources within the urban environment. It is evident that, while some variables (such as solar radiation intensity, relative humidity, or the concentrations of specific pollutants) appear to have a similar influence on NPF events across all sites, it is impossible to predict the characteristics of NPF events at a site using just these variables, due to the crucial role of local conditions.Peer reviewe

Neural Correlates of the Difference between Working Memory Speed and Simple Sensorimotor Speed: An fMRI Study

The difference between the speed of simple cognitive processes and the speed of complex cognitive processes has various psychological correlates. However, the neural correlates of this difference have not yet been investigated. In this study, we focused on working memory (WM) for typical complex cognitive processes. Functional magnetic resonance imaging data were acquired during the performance of an N-back task, which is a measure of WM for typical complex cognitive processes. In our N-back task, task speed and memory load were varied to identify the neural correlates responsible for the difference between the speed of simple cognitive processes (estimated from the 0-back task) and the speed of WM. Our findings showed that this difference was characterized by the increased activation in the right dorsolateral prefrontal cortex (DLPFC) and the increased functional interaction between the right DLPFC and right superior parietal lobe. Furthermore, the local gray matter volume of the right DLPFC was correlated with participants' accuracy during fast WM tasks, which in turn correlated with a psychometric measure of participants' intelligence. Our findings indicate that the right DLPFC and its related network are responsible for the execution of the fast cognitive processes involved in WM. Identified neural bases may underlie the psychometric differences between the speed with which subjects perform simple cognitive tasks and the speed with which subjects perform more complex cognitive tasks, and explain the previous traditional psychological findings