A minimal mathematical model of nonphotochemical quenching of chlorophyll fluorescence

Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.Peer reviewedPreprin

Integrated genomic surveillance enables tracing of person-to-person SARS-CoV-2 transmission chains during community transmission and reveals extensive onward transmission of travel-imported infections, Germany, June to July 2021

Genomic surveillance; Next generation sequencing; Contact tracingVigilancia genómica; Secuenciación de última generación; Rastreo de contactosVigilància genòmica; Seqüenciació de nova generació; Seguiment de contactesBackgroundTracking person-to-person SARS-CoV-2 transmission in the population is important to understand the epidemiology of community transmission and may contribute to the containment of SARS-CoV-2. Neither contact tracing nor genomic surveillance alone, however, are typically sufficient to achieve this objective.AimWe demonstrate the successful application of the integrated genomic surveillance (IGS) system of the German city of Düsseldorf for tracing SARS-CoV-2 transmission chains in the population as well as detecting and investigating travel-associated SARS-CoV-2 infection clusters.MethodsGenomic surveillance, phylogenetic analysis, and structured case interviews were integrated to elucidate two genetically defined clusters of SARS-CoV-2 isolates detected by IGS in Düsseldorf in July 2021.ResultsCluster 1 (n = 67 Düsseldorf cases) and Cluster 2 (n = 36) were detected in a surveillance dataset of 518 high-quality SARS-CoV-2 genomes from Düsseldorf (53% of total cases, sampled mid-June to July 2021). Cluster 1 could be traced back to a complex pattern of transmission in nightlife venues following a putative importation by a SARS-CoV-2-infected return traveller (IP) in late June; 28 SARS-CoV-2 cases could be epidemiologically directly linked to IP. Supported by viral genome data from Spain, Cluster 2 was shown to represent multiple independent introduction events of a viral strain circulating in Catalonia and other European countries, followed by diffuse community transmission in Düsseldorf.ConclusionIGS enabled high-resolution tracing of SARS-CoV-2 transmission in an internationally connected city during community transmission and provided infection chain-level evidence of the downstream propagation of travel-imported SARS-CoV-2 cases.This work was supported by the Ministry for Work, Health and Social Affairs of the State of North Rhine-Westphalia (“24.04.01 Gen. u. IKA” and CPS-1-1A); the Jürgen Manchot Foundation; the German Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung; award numbers 031L0184B and 01KX2021); the German Research Foundation (award 428994620)

The RNA workbench: Best practices for RNA and high-throughput sequencing bioinformatics in Galaxy

RNA-based regulation has become a major research topic in molecular biology. The analysis of epigenetic and expression data is therefore incomplete if RNA-based regulation is not taken into account. Thus, it is increasingly important but not yet standard to combine RNA-centric data and analysis tools with other types of experimental data such as RNA-seq or ChIP-seq. Here, we present the RNA workbench, a comprehensive set of analysis tools and consolidated workflows that enable the researcher to combine these two worlds. Based on the Galaxy framework the workbench guarantees simple access, easy extension, flexible adaption to personal and security needs, and sophisticated analyses that are independent of command-line knowledge. Currently, it includes more than 50 bioinformatics tools that are dedicated to different research areas of RNA biology including RNA structure analysis, RNA alignment, RNA annotation, RNA-protein interaction, ribosome profiling, RNA-seq analysis and RNA target prediction. The workbench is developed and maintained by experts in RNA bioinformatics and the Galaxy framework. Together with the growing community evolving around this workbench, we are committed to keep the workbench up-to-date for future standards and needs, providing researchers with a reliable and robust framework for RNA data analysis

Integrated genomic surveillance enables tracing of person-to-person SARS-CoV-2 transmission chains during community transmission and reveals extensive onward transmission of travel-imported infections, Germany, June to July 2021

BackgroundTracking person-to-person SARS-CoV-2 transmission in the population is important to understand the epidemiology of community transmission and may contribute to the containment of SARS-CoV-2. Neither contact tracing nor genomic surveillance alone, however, are typically sufficient to achieve this objective.AimWe demonstrate the successful application of the integrated genomic surveillance (IGS) system of the German city of Düsseldorf for tracing SARS-CoV-2 transmission chains in the population as well as detecting and investigating travel-associated SARS-CoV-2 infection clusters.MethodsGenomic surveillance, phylogenetic analysis, and structured case interviews were integrated to elucidate two genetically defined clusters of SARS-CoV-2 isolates detected by IGS in Düsseldorf in July 2021.ResultsCluster 1 (n = 67 Düsseldorf cases) and Cluster 2 (n = 36) were detected in a surveillance dataset of 518 high-quality SARS-CoV-2 genomes from Düsseldorf (53% of total cases, sampled mid-June to July 2021). Cluster 1 could be traced back to a complex pattern of transmission in nightlife venues following a putative importation by a SARS-CoV-2-infected return traveller (IP) in late June; 28 SARS-CoV-2 cases could be epidemiologically directly linked to IP. Supported by viral genome data from Spain, Cluster 2 was shown to represent multiple independent introduction events of a viral strain circulating in Catalonia and other European countries, followed by diffuse community transmission in Düsseldorf.ConclusionIGS enabled high-resolution tracing of SARS-CoV-2 transmission in an internationally connected city during community transmission and provided infection chain-level evidence of the downstream propagation of travel-imported SARS-CoV-2 cases

Geographical and temporal distribution of SARS-CoV-2 clades in the WHO European Region, January to June 2020

We show the distribution of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) genetic clades over time and between countries and outline potential genomic surveillance objectives. We applied three genomic nomenclature systems to all sequence data from the World Health Organization European Region available until 10 July 2020. We highlight the importance of real-time sequencing and data dissemination in a pandemic situation, compare the nomenclatures and lay a foundation for future European genomic surveillance of SARS-CoV-2

Community-Driven Data Analysis Training for Biology

The primary problem with the explosion of biomedical datasets is not the data, not computational resources, and not the required storage space, but the general lack of trained and skilled researchers to manipulate and analyze these data. Eliminating this problem requires development of comprehensive educational resources. Here we present a community-driven framework that enables modern, interactive teaching of data analytics in life sciences and facilitates the development of training materials. The key feature of our system is that it is not a static but a continuously improved collection of tutorials. By coupling tutorials with a web-based analysis framework, biomedical researchers can learn by performing computation themselves through a web browser without the need to install software or search for example datasets. Our ultimate goal is to expand the breadth of training materials to include fundamental statistical and data science topics and to precipitate a complete re-engineering of undergraduate and graduate curricula in life sciences. This project is accessible at https://training.galaxyproject.org. We developed an infrastructure that facilitates data analysis training in life sciences. It is an interactive learning platform tuned for current types of data and research problems. Importantly, it provides a means for community-wide content creation and maintenance and, finally, enables trainers and trainees to use the tutorials in a variety of situations, such as those where reliable Internet access is unavailable

Porphyrine de cobalt dans surfaces métalliques - propriété d’adsorption et de template

Cette thèse est une étude théorique sur la interface de porphyrine de cobalt avec des surfaces métalliques avec le code VASP DFT. Le cadre DFT nécessaire a été introduit dans le chapitre 1. La structure de la jBardeen, une programme ecrit en Java, pour la simulation de la STM est expliqué dans le chapitre 2 et le code source est jointe en annexe. Une étude de l'adsorption de CoTPP sur les surfaces métalliques a été entrepris dans le chapitre 3. Différents paramètres de calcul ont été évalués: Le site d'adsorption et de la géométrie à la fois la molécule et la surface ont été étudiés par rapport à la xc-fonctionnel et correction de la dispersion utilisée. Une adsorption site le plus stable est identifié. Par conséquent, ce site plus stable a été étudiée pour sa structure électronique. Calculés images STM avec le code jBardeen ont été comparés avec une experimentation de CoTPP Cu sur une surface (111) avec une couverture sous monocouche. Dans le chapitre 4, un adatome Fe a été présenté à la CoTPP sur Ag système (111). Trois sites de liaison symétrique différentes pour l'atome Fe ont été identifiés sur le macrocycle, marqué les , bi-, brd- et bru-positions. Un moment magnétique pouvait être attestée qui a été principalement situé sur l'atome Fe. Voies possibles entre les quatre, symétriquement équivalentes, sites bi- ont été étudiées avec des méthodes différentes. Simples calculs dans le vacuum et calculs de la “Nudged Elastic Band” (NEB) de l'ensemble du système a révélé une hauteur de barrière légèrement au-dessus de 0,2 eV allant de position bi à la posititon brd. Une analyse de vibration a montré que la commutation de l'atome Fe est susceptible, lorsqu'il est perturbé hors d'équilibre dans les positions brd et bru.This thesis is a theoretical study on the cobalt porphyrin - coinage metal surface interface with the DFT code VASP. The necessary DFT framework has been introduced in chapter 1. The structure of the Java program jBardeen for STM simulation is explained in chapter 2 and the source code is attached as Appendix. A study of the adsorption of CoTPP on coinage metal surfaces has been undertaken in chapter 3. Different parameters of the calculation have been evaluated: the adsorption site and the geometry of both the molecule and surface have been investigated with respect to the xc-functional and dispersion correction used. A most stable adsorption site -bridge down- is identified. Consequently, this most stable site was investigated for its electronic structure. Calculated STM images with the jBardeen code were compared with an experiment of CoTPP on a Cu(111) surface with sub monolayer coverage. In chapter 4 an Fe adatom was introduced to the CoTPP on Ag(111) system. Three symmetrically different binding sites for the Fe atom were identified on the macrocycle, labelled the bi-, brd- and bru-positions for bisector, bridge down and bridge up respectively. A magnetic moment could be evidenced which was mainly located on the Fe atom. Possible pathways between the four symmetrically equivalent bisector sites were investigated with different methods. Single point calculations in vacuum and Nudged Elastic Band (NEB) of the whole system revealed a barrier height of slightly above 0.2 eV going from bi- to the brd-position. A vibrational analysis showed that switching of the Fe atom is likely, when perturbed out of equilibrium in the brd- and bru- positions

Porphyrine de cobalt dans surfaces métalliques - propriété d’adsorption et de template

Cette thèse est une étude théorique sur la interface de porphyrine de cobalt avec des surfaces métalliques avec le code VASP DFT. Le cadre DFT nécessaire a été introduit dans le chapitre 1. La structure de la jBardeen, une programme ecrit en Java, pour la simulation de la STM est expliqué dans le chapitre 2 et le code source est jointe en annexe. Une étude de l'adsorption de CoTPP sur les surfaces métalliques a été entrepris dans le chapitre 3. Différents paramètres de calcul ont été évalués: Le site d'adsorption et de la géométrie à la fois la molécule et la surface ont été étudiés par rapport à la xc-fonctionnel et correction de la dispersion utilisée. Une adsorption site le plus stable est identifié. Par conséquent, ce site plus stable a été étudiée pour sa structure électronique. Calculés images STM avec le code jBardeen ont été comparés avec une experimentation de CoTPP Cu sur une surface (111) avec une couverture sous monocouche. Dans le chapitre 4, un adatome Fe a été présenté à la CoTPP sur Ag système (111). Trois sites de liaison symétrique différentes pour l'atome Fe ont été identifiés sur le macrocycle, marqué les , bi-, brd- et bru-positions. Un moment magnétique pouvait être attestée qui a été principalement situé sur l'atome Fe. Voies possibles entre les quatre, symétriquement équivalentes, sites bi- ont été étudiées avec des méthodes différentes. Simples calculs dans le vacuum et calculs de la “Nudged Elastic Band” (NEB) de l'ensemble du système a révélé une hauteur de barrière légèrement au-dessus de 0,2 eV allant de position bi à la posititon brd. Une analyse de vibration a montré que la commutation de l'atome Fe est susceptible, lorsqu'il est perturbé hors d'équilibre dans les positions brd et bru.This thesis is a theoretical study on the cobalt porphyrin - coinage metal surface interface with the DFT code VASP. The necessary DFT framework has been introduced in chapter 1. The structure of the Java program jBardeen for STM simulation is explained in chapter 2 and the source code is attached as Appendix. A study of the adsorption of CoTPP on coinage metal surfaces has been undertaken in chapter 3. Different parameters of the calculation have been evaluated: the adsorption site and the geometry of both the molecule and surface have been investigated with respect to the xc-functional and dispersion correction used. A most stable adsorption site -bridge down- is identified. Consequently, this most stable site was investigated for its electronic structure. Calculated STM images with the jBardeen code were compared with an experiment of CoTPP on a Cu(111) surface with sub monolayer coverage. In chapter 4 an Fe adatom was introduced to the CoTPP on Ag(111) system. Three symmetrically different binding sites for the Fe atom were identified on the macrocycle, labelled the bi-, brd- and bru-positions for bisector, bridge down and bridge up respectively. A magnetic moment could be evidenced which was mainly located on the Fe atom. Possible pathways between the four symmetrically equivalent bisector sites were investigated with different methods. Single point calculations in vacuum and Nudged Elastic Band (NEB) of the whole system revealed a barrier height of slightly above 0.2 eV going from bi- to the brd-position. A vibrational analysis showed that switching of the Fe atom is likely, when perturbed out of equilibrium in the brd- and bru- positions

Training material for exome sequencing

Exome sequencing means that all protein-coding genes in a genome are sequenced. In Humans, there are ~180,000 exons that makes up 1% of the human genome which contain ~30 million base pairs. Mutations in the exome have usually a higher impact and more severe consequences, than in the remaining 99% of the genome. With exome sequencing, one can identify genetic variation that is responsible for both Mendelian and common diseases without the high costs associated with whole-genome sequencing. Indeed, exome sequencing is the most efficient way to identify the genetic variants in all of an individual's genes. Exome sequencing is cheaper also than whole-genome sequencing. For training on exome sequencing data analysis, the Galaxy community proposes two tutorials (https://github.com/bgruening/training-material/tree/master/Exome-Seq). Here, you can find the needed datasets for these tutorials

Scrutinizing individual CoTPP molecule adsorbed on coinage metal surfaces from the interplay of STM experiment and theory

International audienceThe cobalt tetraphenyl porphyrin (CoTPP) molecule and its adsorption on clean Cu and Ag surfaces are comparatively analyzed within the Density Functional Theory (DFT) framework. Different sets of exchange-correlation functionals — the Local Density Approximation (LDA) and the Gradient Generalized Approximation (along with the PBE functional and the semi-empirical Grimme's corrections of dispersion) — are compared. Two prominent structural adsorption properties are disclosed in all sets of calculations: an asymmetric saddle deformation of CoTPP with an enhanced tilting of the upwards bent pyrroles and a single adsorption site where the Co center occupies a bridge position and one molecular axis (along the direction of the lowered pair of opposite pyrroles) is aligned with the dense-packed View the MathML sourc