Stress corrosion cracking of titanium alloys at ambient temperature in aqueous solutions Yearly summary report, Jul. 1967 - Jun. 1968

Stress corrosion cracking tests of titanium alloys at ambient temperature in aqueous solution

1969: Abilene Christian College Bible Lectures - Full Text

GOD’S ETERNAL PURPOSE Being the Abilene Christian College Annual Bible Lectures 1969 Published by ABILENE CHRISTIAN COLLEGE BOOK STORE ACC Station Abilene, Texas 7960

US Fish and Wildlife Service 1979 wetland classification: A review

In 1979 the US Fish and Wildlife Service published and adopted a classification of wetlands and deepwater habitats of the United States. The system was designed for use in a national inventory of wetlands. It was intended to be ecologically based, to furnish the mapping units needed for the inventory, and to provide national consistency in terminology and definition. We review the performance of the classification after 13 years of use. The definition of wetland is based on national lists of hydric soils and plants that occur in wetlands. Our experience suggests that wetland classifications must facilitate mapping and inventory because these data gathering functions are essential to management and preservation of the wetland resource, but the definitions and taxa must have ecological basis. The most serious problem faced in construction of the classification was lack of data for many of the diverse wetland types. Review of the performance of the classification suggests that, for the most part, it was successful in accomplishing its objectives, but that problem areas should be corrected and modification could strengthen its utility. The classification, at least in concept, could be applied outside the United States. Experience gained in use of the classification can furnish guidance as to pitfalls to be avoided in the wetland classification process

Use of a reciprocal transplant study to measure the rate of plant community change in a tidal marsh along a salinity gradient

The relationship between environmental factors and the spatial distribution of maintained and actively used burrows of the grapsid crab Helograpsus haswellianus was studied at three saltmarsh sites in southeast Queensland, Australia. The sites had been modified by runnelling for mosquito-control, a method that transports low-amplitude tides to areas of saltmarsh. The study investigated the relationship between burrow density, burrow aperture size, and runnelling, as well as the effect of flooding or non-flooding tides and distance from a tidal source. Responses differed at the three sites. The most consistent pattern across all sites was that active burrows were most numerous between 30 and 50 m from the saltmarsh / mangrove interface at the landward side of the tidal source. At particular sites, there were significant relationships between burrow aperture size, tidal period, and the presence of runnels. Generally, few small burrows occurred low on the shore, while larger burrows were distributed across the shore to 50 m. At naturally dry sites, more burrows occurred within 5 m of the runnel, whereas at naturally wet sites, fewer burrows were found close to the runnel. As runnels transport low-amplitude tides, moisture conditions required for burrowing may very between flooding and non-flooding tides. Overall, the influence of tides on the density of crab burrows and their aperture sizes was of more importance than the presence of runnels alone

Early Vegetation Development on an Exposed Reservoir: Implications for Dam Removal

The 4-year drawdown of Horsetooth Reservoir, Colorado, for dam maintenance, provides a case study analog of vegetation response on sediment that might be exposed from removal of a tall dam. Early vegetation recovery on the exposed reservoir bottom was a combination of (1) vegetation colonization on bare, moist substrates typical of riparian zones and reservoir sediment of shallow dams and (2) a shift in moisture status from mesic to the xeric conditions associated with the pre-impoundment upland position of most of the drawdown zone. Plant communities changed rapidly during the first four years of exposure, but were still substantially different from the background upland plant community. Predictions from the recruitment box model about the locations of Populus deltoides subsp. monilifera (plains cottonwood) seedlings relative to the water surface were qualitatively confirmed with respect to optimum locations. However, the extreme vertical range of water surface elevations produced cottonwood seed regeneration well outside the predicted limits of drawdown rate and height above late summer stage. The establishment and survival of cottonwood at high elevations and the differences between the upland plant community and the community that had developed after four years of exposure suggest that vegetation recovery following tall dam removal will follow a trajectory very different from a simple reversal of the response to dam construction, involving not only long time scales of establishment and growth of upland vegetation, but also possibly decades of persistence of legacy vegetation established during the reservoir to upland transition

Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium

Microstructural evolution and interfacial reactions during active metal vacuum brazing of Ti (grade-2) and stainless steel (SS 304L) using a Ag-based alloy containing Cu, Ti, and Al was investigated. A Ni-depleted solid solution layer and a discontinuous layer of (Ni,Fe)2TiAl intermetallic compound formed on the SS surface and adjacent to the SS-braze alloy interface, respectively. Three parallel contiguous layers of intermetallic compounds, CuTi, AgTi, and (Ag,Cu)Ti2, formed at the Ti-braze alloy interface. The diffusion path for the reaction at this interface was established. Transmission electron microscopy revealed formation of nanocrystals of Ag-Cu alloy of size ranging between 20 and 30 nm in the unreacted braze alloy layer. The interdiffusion zone of β-Ti(Ag,Cu) solid solution, formed on the Ti side of the joint, showed eutectoid decomposition to lamellar colonies of α-Ti and internally twinned (Cu,Ag)Ti2 inter- metallic phase, with an orientation relationship between the two. Bend tests indicated that the failure in the joints occurred by formation and propagation of the crack mostly along the Ti- braze alloy interface, through the (Ag,Cu)Ti2 phase layer

Grain refinement of magnesium alloys: a review of recent research, theoretical developments and their application

This paper builds on the ‘‘Grain Refinement of Mg Alloys’’ published in 2005 and reviews the grain refinement research onMg alloys that has been undertaken since then with an emphasis on the theoretical and analytical methods that have been developed. Consideration of recent research results and current theoretical knowledge has highlighted two important factors that affect an alloy’s as-cast grain size. The first factor applies to commercial Mg-Al alloys where it is concluded that impurity and minor elements such as Fe and Mn have a substantially negative impact on grain size because, in combination with Al, intermetallic phases can be formed that tend to poison the more potent native or deliberately added nucleant particles present in the melt. This factor appears to explain the contradictory experimental outcomes reported in the literature and suggests that the search for a more potent and reliable grain refining technology may need to take a different approach. The second factor applies to all alloys and is related to the role of constitutional supercooling which, on the one hand, promotes grain nucleation and, on the other hand, forms a nucleation-free zone preventing further nucleation within this zone, consequently limiting the grain refinement achievable, particularly in low solute-containing alloys. Strategies to reduce the negative impact of these two factors are discussed. Further, the Interdependence model has been shown to apply to a broad range of casting methods from slow cooling gravity die casting to fast cooling high pressure die casting and dynamic methods such as ultrasonic treatment