92,344 research outputs found
Recommended from our members
Clarifying interoperability: The SISO CSPI PDG standard for commercial off-the-shelf simulation package interoperability reference models
Commercial-off-the-shelf simulation packages (CSPs), visual interactive modelling environments such as Arena, Anylogic, Flexsim, Simul8, Witness, etc., are important "black box" software tools that support the development, experimentation and visualization of simulation models. They are widely used in commerce, defence, health, manufacturing and logistics. There is a growing need to link together, or to interoperate, models developed in these CSPs across computer networks. The motivation for this includes data sensitivity, difficult to move resources and speed up
A comparison of CMB- and HLA-based approaches to type I interoperability reference model problems for COTS-based distributed simulation
Commercial-off-the-shelf (COTS) simulation packages (CSPs) are software used by many simulation modellers to build and experiment with models of various systems in domains such as manufacturing, health, logistics and commerce. COTS distributed simulation deals with the interoperation of CSPs and their models. Such interoperability has been classified into six interoperability reference models. As part of an on-going standardisation effort, this paper introduces the COTS Simulation Package Emulator, a proposed benchmark that can be used to investigate Type I interoperability problems in COTS distributed simulation. To demonstrate its use, two approaches to this form of interoperability are discussed, an implementation of the CMB conservative algorithm, an example of a so-called âlightâ approach, and an implementation of the HLA TAR algorithm, an example of a so-called âheavyâ approach. Results from experimentation over four federation topologies are presented and it is shown the HLA approach out performs the CMB approach in almost all cases. The paper concludes that the CSPE benchmark is a valid basis from which the most efficient approach to Type I interoperability problems for COTS distributed simulation can be discovered
L-band, 1.2 m parabolic antenna-noise temperature measurement
Extensive antenna-noise temperature measurements at 1.6 GHz (L-band) were made using a 1.2 m (4 ft. diameter) parabolic dish antenna mounted on the flying bridge of a modern 15,690-ton, commercial-container ship. Both in-harbor and at-sea radiometer measurements were made that indicated a steady background, antenna-noise temperature value slightly less than 70 degrees Kelvin (K) at elevation angles of 5 percent, and greater, at 1.6 GHz. A comparison of theoretical and measured values indicate excellent agreement within about 5K for at-sea data. These measurements are helpful to RF equipment designers of maritime, L-band shipboard terminals for operation with the two, geostationary, maritime satellites, Marisat-A and -B
Recommended from our members
COTS simulation package (CSP) interoperability - A solution to synchronous entity passing
In this paper we examine Commercial-Off-The- Shelf (COTS) Simulation Package (CSP) interoperability for one type of distributed simulation problem, namely synchronous entity passing. Synchronous entity passing is also referred to as the bounded buffer interoperability reference model. It deals with the case where for entities passed between models the receiving queue is bounded or the receiving workstation has limited capacity. This means the sending model must check the status of the receiving model before it can send entities. Correspondingly, the receiving model should update the status information dynamically when it changes. Similar to the work done on asynchronous entity passing, the High Level Architecture is chosen as the underlying standard to support reuse and interoperability. To simplify the integration of the CSP and the HLA, a middleware layer called DSManager is provided. Some new problems generated for synchronous entity passing are discussed and solutions are proposed together with a description of their implementation. Two sets of experiments are conducted to evaluate the solutions using a CSP Emulator (CSPE) which supports both standalone and distributed simulation
Using a desktop grid to support simulation modelling
Simulation is characterized by the need to run multiple sets of computationally intensive experiments. We argue that Grid computing can reduce the overall execution time of such experiments by tapping into the typically underutilized network of departmental desktop PCs, collectively known as desktop grids. Commercial-off-the-shelf simulation packages (CSPs) are used in industry to simulate models. To investigate if Grid computing can benefit simulation, this paper introduces our desktop grid, WinGrid, and discusses how this can be used to support the processing needs of CSPs. Results indicate a linear speed up and that Grid computing does indeed hold promise for simulation
Recommended from our members
Speeding-up the execution of credit risk simulations using desktop grid computing: A case study
This paper describes a case study that was
undertaken at a leading European Investment
bank in which desktop grid computing was used
to speed-up the execution of Monte Carlo credit risk simulations. The credit risk simulations were modelled using commercial-off-the-shelf simulation packages (CSPs). The CSPs did not incorporate built-in support for desktop grids, and therefore the authors implemented a middleware for desktop grid computing, called WinGrid, and interfaced it with the CSP. The performance results show that WinGrid can speed-up the execution of CSP-based Monte Carlo simulations. However, since WinGrid was installed on non-dedicated PCs, the speed-up
achieved varied according to usersâ PC usage.
Finally, the paper presents some lessons learnt from this case study. It is expected that this paper will encourage simulation practitioners and CSP vendors to experiment with desktop grid computing technologies with the objective of speeding-up simulation experimentation
Recommended from our members
Leveraging simulation practice in industry through use of desktop grid middleware
This chapter focuses on the collaborative use of computing resources to support decision making in industry. Through the use of middleware for desktop grid computing, the idle CPU cycles available on existing computing resources can be harvested and used for speeding-up the execution of applications that have ânon-trivialâ processing requirements. This chapter focuses on the desktop grid middleware BOINC and Condor, and discusses the integration of commercial simulation software together with free-to-download grid middleware so as to offer competitive advantage to organizations that opt for this technology. It is expected that the low-intervention integration approach presented in this chapter (meaning no changes to source code required) will appeal to both simulation practitioners (as simulations can be executed faster, which in turn would mean that more replications and optimization is possible in the same amount of time) and the management (as it can potentially increase the return on investment on existing resources)
Recommended from our members
Modular HLA RTI services: The GRIDS approach
The Generic Runtime Infrastructure for Distributed Simulation (GRIDS) has been developed to investigate modularity issues in distributed simulation. It could be argued that although the HLA RTI is a widespread solution to distributed simulation, it cannot include all possible services. This paper investigates an approach to extending the distributed simulation services available in the HLA RTI. One example of this is bridging support for HLA/DIS legacy integration. This paper therefore presents GRIDS, how GRIDS can be used to provide modular service support for the HLA RTI, and a case study on legacy integration to demonstrate our approach
Aircraft measurement of radio frequency noise at 121.5 MHz, 243 MHz and 406 MHz
An airborne survey measurement of terrestrial radio-frequency noise over U.S. metropolitan areas was carried out at 121.5, 243 and 406 MHz with horizontal-polarization monopole antennas. Flights were at 25,000 feet altitude. Radio-noise measurements, expressed in equivalent antenna-noise temperature, indicate a steady-background noise temperature of 572,000 K, at 121.5 MHz, during daylight over New York City. This data is helpful in compiling radio-noise temperature maps; in turn useful for designing satellite-aided, emergency-distress search and rescue communication systems
Integrating BOINC with Microsoft Excel: A case study
The convergence of conventional Grid computing with public resource computing (PRC) offers potential benefits in the enterprise setting. For this work we took the popular PRC toolkit BOINC and used it to execute a previously monolithic Microsoft Excel financial model across several commodity computers. Our experience indicates that speedup approaching linear may be realised for certain scenarios, and that this approach offers a viable route to leveraging idle desktop PCs in the enterprise
- âŠ