Synthesis of Y1BaCu3O(x) superconducting powders by intermediate phase reactions

A procedure for synthesizing Y1Ba2Cu3O(x) by solid state reactions was developed. The method is based on the use of barium compounds, previously synthesized, as intermediate phases for the process. The reaction kinetics of this procedure were established between 860 C and 920 C. The crystal structure and the presence of second phases were studied by means of XRD. The sintering behavior and ceramic parameters were also determined. The orthorhombic type-I structure was obtained on the synthesized bodies after a cooling cycle in an air atmosphere. Superconducting transition took place at 91 K. Sintering densities higher than 95 percent D sub th were attained at temperatures below 940 C

Surfactant effects in monodisperse magnetite nanoparticles of controlled size

Monodisperse magnetite Fe3O4 nanoparticles of controlled size within 6 and 20 nm in diameter were synthesized by thermal decomposition of an iron organic precursor in an organic medium. Particles were coated with oleic acid. For all samples studied, saturation magnetization Ms reaches the expected value for bulk magnetite, in contrast to results in small particle systems for which Ms is usually much smaller due to surface spin disorder. The coercive field for the 6 nm particles is also similar to that of bulk magnetite. Both results suggest that the oleic acid molecules covalently bonded to the nanoparticle surface yield a strong reduction in the surface spin disorder. However, although the saturated state may be similar, the approach to saturation is different and, in particular, the high-field differential susceptibility is one order of magnitude larger than in bulk materials. The relevance of these results in biomedical applications is discussed.Comment: 3 pages, 3 figures. Presented at JEMS 2006 (San Sebastian, Spain). Submitted to JMM

Aggregation state and magnetic properties of magnetite nanoparticles controlled by an optimized silica coating

The control of magnetic interactions is becoming essential to expand/improve the applicability of magnetic nanoparticles (NPs). Here, we show that an optimized microemulsion method can be used to obtain homogenous silica coatings on even single magnetic nuclei of highly crystalline Fe3-xO4 NPs (7 and 16nm) derived from a high-temperature method. We show that the thickness of this coating is controlled almost at will allowing much higher average separation among particles as compared to the oleic acid coating present on pristine NPs. Magnetic susceptibility studies show that the thickness of the silica coating allows the control of magnetic interactions. Specifically, as this effect is better displayed for the smallest particles, we show that dipole-dipole interparticle interactions can be tuned progressively for the 7 nm NPs, from almost non-interacting to strongly interacting particles at room temperature. The quantitative analysis of the magnetic properties unambiguously suggests that dipolar interactions significantly broaden the effective distribution of energy barriers by spreading the distribution of activation magnetic volumes. Published by AIP Publishing

Magnetic Nanoparticles for Power Absorption: optimizing size, shape and magnetic properties

We present a study on the magnetic properties of naked and silica-coated Fe3O4 nanoparticles with sizes between 5 and 110 nm. Their efficiency as heating agents was assessed through specific power absorption (SPA) measurements as a function of particle size and shape. The results show a strong dependence of the SPA with the particle size, with a maximum around 30 nm, as expected for a Neel relaxation mechanism in single-domain particles. The SiO2 shell thickness was found to play an important role in the SPA mechanism by hindering the heat outflow, thus decreasing the heating efficiency. It is concluded that a compromise between good heating efficiency and surface functionality for biomedical purposes can be attained by making the SiO2 functional coating as thin as possible.Comment: 15 pages, 7 figures, 2 table

Synthesis and characterization of core-shell structure silica-coated Fe29.5Ni70.5 nanoparticles

In view of potential applications of magnetic particles in biomedicine and electromagnetic devices, we made use of the classical Stober method base-catalysed hydrolysis and condensation of tetraethoxysilane (TEOS) to encapsulate FeNi nanoparticles within a silica shell. An original stirring system under high power ultrasounds made possible to disperse the otherwise agglomerated particles. Sonication guaranteed particles to remain dispersed during the Stober synthesis and also improved the efficiency of the method. The coated particles are characterized by electron microscopy (TEM) and spectroscopy (EDX) showing a core-shell structure with a uniform layer of silica. Silica-coating does not affect the core magnetic properties. Indeed, all samples are ferromagnetic at 77 K and room temperature and the Curie point remains unchanged. Only the coercive force shows an unexpected non-monotonous dependence on silica layer thickness.Comment: Regular paper submited to international peer-reveiwed journa

Investigation of a Mesoporous Silicon Based Ferromagnetic Nanocomposite

A semiconductor/metal nanocomposite is composed of a porosified silicon wafer and embedded ferromagnetic nanostructures. The obtained hybrid system possesses the electronic properties of silicon together with the magnetic properties of the incorporated ferromagnetic metal. On the one hand, a transition metal is electrochemically deposited from a metal salt solution into the nanostructured silicon skeleton, on the other hand magnetic particles of a few nanometres in size, fabricated in solution, are incorporated by immersion. The electrochemically deposited nanostructures can be tuned in size, shape and their spatial distribution by the process parameters, and thus specimens with desired ferromagnetic properties can be fabricated. Using magnetite nanoparticles for infiltration into porous silicon is of interest not only because of the magnetic properties of the composite material due to the possible modification of the ferromagnetic/superparamagnetic transition but also because of the biocompatibility of the system caused by the low toxicity of both materials. Thus, it is a promising candidate for biomedical applications as drug delivery or biomedical targeting

Horizontal low gradient magnetophoresis behaviour of iron oxide nanoclusters at the different steps of the synthesis route

In this work the use of Horizontal Low Gradient Magnetic Field (HLGMF) (<100T/m) for filtration, control and separation of synthesized magnetic nanoparticles (NPs) is investigated. The characteristics of the suspension, size and type of the NPs are considered and discussed. For these purposes, Fe2O3 silica coated nanoclusters of about 150 nm are synthesized by co-precipitation, monodispersion and silica coating. SQUID, TEM, XRD, and z potential techniques were used to characterize the synthesized nanoclusters. An extensive magnetophoresis study was performed at different magnetophoretical conditions. Different reversible aggregation times were observed at different HLGMF, at each step of the synthesis route. In particular, differences of several orders of magnitude were observed when comparing citric acid modified NPs with silica coated nanoclusters . Reversible aggregation times are correlated to the properties of the NPs at different steps of synthesis route.Fundação para a Ciência e a Tecnologia (FCT) - Bolsa NANO/NMed-SD/0156/2007, PTCD/CTM/69316/2006

Unified mathematical Model of the Kinetics of Nanoparticle Phase Condensation in Magnetic Fields

In this paper, we aim to present a unified mathematical modeling and description of the kinetics of magnetic nanoparticles phase condensation (conducting to the appearance of bulk elongated aggregates) under homogeneous permanent or alternating magnetic field. For such case, the aggregate growth rate usually takes the form dV/dt = G(V)∆(t), with V and t being the aggregate's volume and time, respectively, ∆(t)—the supersaturation of the nanoparticle suspension, and with the function G(V) depending on the precise configuration of the applied field. The Liouville equation for the aggregate size distribution function is solved by the method of characteristics. The solution is obtained in parametric form for an arbitrary function G(V), providing a general framework for any type of the applied magnetic field. In the particular case of low-frequency rotating magnetic field (G(V)~V2/3), an explicit expression of the distribution function is obtained, while the dimensionless average aggregate volume 〈V〉 is found by the method of moments allowing a complete decoupling of the system of equations for the statistical moments 〈Vn〉 of the distribution function. Numerical examples are provided for the cases of permanent and low- or medium-frequency rotating fields. It is shown that in all cases, the average volume 〈V〉 only slightly depends on the relative width of the initial size distribution. Nevertheless, at any times, t &gt; 0, the size distribution shows a significant spreading around the average value 〈V〉, which increases progressively with time and achieves a final plateau at long times. This model can be helpful for several biomedical or environmental applications of magnetic nanoparticles in which the nanoparticle suspension undergoes a field-induced phase condensation. © 2020 John Wiley & Sons, Ltd.PK acknowledges the French “Agence Nationale de la Recherche,” Project Future Investments UCA JEDI, No. ANR‐15‐IDEX‐01 (projects ImmunoMag and MagFilter) and the private company Axlepios Biomedicals for financial support. JQC acknowledges the financial support of UCA JEDI and Axlepios Biomedicals through the PhD fellowship. AZ thanks the Russian Science Foundation, project 20‐12‐00031, for the financial support

Prolate spheroidal hematite particles equatorially belt with drug-carrying layered double hydroxide disks: Ring Nebula-like nanocomposites

A new nanocomposite architecture is reported which combines prolate spheroidal hematite nanoparticles with drug-carrying layered double hydroxide [LDH] disks in a single structure. Spindle-shaped hematite nanoparticles with average length of 225 nm and width of 75 nm were obtained by thermal decomposition of hydrothermally synthesized hematite. The particles were first coated with Mg-Al-NO3-LDH shell and then subjected to anion exchange with salicylate ions. The resulting bio-nanohybrid displayed a close structural resemblance to that of the Ring Nebula. Scanning electron microscope and transmission electron microscopy images showed that the LDH disks are stacked around the equatorial part of the ellipsoid extending along the main axis. This geometry possesses great structural tunability as the composition of the LDH and the nature of the interlayer region can be tailored and lead to novel applications in areas ranging from functional materials to medicine by encapsulating various guest molecules

Synthesis of Bio-Compatible SPION–based Aqueous Ferrofluids and Evaluation of RadioFrequency Power Loss for Magnetic Hyperthermia

Bio-compatible magnetic fluids having high saturation magnetization find immense applications in various biomedical fields. Aqueous ferrofluids of superparamagnetic iron oxide nanoparticles with narrow size distribution, high shelf life and good stability is realized by controlled chemical co-precipitation process. The crystal structure is verified by X-ray diffraction technique. Particle sizes are evaluated by employing Transmission electron microscopy. Room temperature and low-temperature magnetic measurements were carried out with Superconducting Quantum Interference Device. The fluid exhibits good magnetic response even at very high dilution (6.28 mg/cc). This is an advantage for biomedical applications, since only a small amount of iron is to be metabolised by body organs. Magnetic field induced transmission measurements carried out at photon energy of diode laser (670 nm) exhibited excellent linear dichroism. Based on the structural and magnetic measurements, the power loss for the magnetic nanoparticles under study is evaluated over a range of radiofrequencies