Comparison of Electropolishing of Aluminum in a Deep Eutectic Medium and Acidic Electrolyte

Research advances in electropolishing, with respect to the field of metalworking, have afforded significant improvements in the surface roughness and conductivity properties of aluminum polished surfaces in ways that machine polishing and simple chemical polishing cannot. The effects of a deep eutectic medium as an acid-free electrolyte were tested to determine the potential energy thresholds during electropolishing treatments based upon temperature, experiment duration, current, and voltage. Using voltammetry and chronoamperometry tests during electropolishing to supplement representative recordings via atomic force microscopy (AFM), surface morphology comparisons were performed regarding the electropolishing efficiency of phosphoric acid and acid-free ionic liquid treatments for aluminum. This eco-friendly solution produced polished surfaces superior to those surfaces treated with industry standard acid electrochemistry treatments of 1 M phosphoric acid. The roughness average of the as-received sample became 6.11 times smoother, improving from 159 nm to 26 nm when electropolished with the deep eutectic solvent. This result was accompanied by a mass loss of 0.039 g and a 7.2 µm change in step height along the edge of the electropolishing interface, whereas the acid treatment resulted in a slight improvement in surface roughness, becoming 1.63 times smoother with an average post-electropolishing roughness of 97.7 nm, yielding a mass loss of 0.0458 g and a step height of 8.1 µm

Comparison of Electrochemical Polishing Treatments between Phosphoric Acid and a Deep Eutectic Solvent for High-Purity Copper

This study investigated and compared the acid-free electropolishing of copper with the state-of-the-art acidic electropolishing process. The acid-free medium used in this study is based on a deep eutectic solvent comprised of 2:1 ethylene glycol and choline chloride. The electrochemical study included voltammetry and chronoamperometry tests during the electropolishing process. The characterization techniques used were atomic force microscopy (AFM) and digital microscopy, and surface morphology comparisons summarized the electropolishing efficiency of phosphoric acid and acid-free deep eutectic solvent treatments for high-purity copper. Electropolishing copper with a deep eutectic solvent resulted in a mirror finish and a post-treatment surface that was 8× smoother than the original metal surface prior to electropolishing treatments with a smoothing efficiency of 91.1 ± 1.5%. This eco-friendly solution produced polished surfaces superior to those surfaces treated with industry standard acid electrochemistry treatments of 1 M H3PO4

Efficient Removal of Lead Ions from Aqueous Media Using Sustainable Sources on Marine Algae

The goal of this project is to explore a new method to efficiently remove Pb(II) ions from water by processing Undaria pinnatifida into immobilized beads using sodium alginate and calcium chloride. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Using immobilized U. pinnatifida, we investigated the effect of various factors on Pb(II) ion removal efficiency such as temperature, pH, ionic strength, time, and underlying biosorption mechanisms. For Pb(II) ion biosorption studies, Pb(II) ion biosorption data were obtained and analyzed using Langmuir and Freundlich adsorption models. It is found that the maximum Pb(II) ion adsorption capacity (Xm) of U. pinnatifida was estimated to be ∼5 times greater than that of activated carbon, indicating the superior Pb(II) ion removal capability of U. pinnatifida compared to activated carbon. In addition, a thermodynamic study indicates that biosorption processes are found to be endothermic and an increase in the Pb(II) ion solution temperature provides a more preferential reaction toward Pb(II) ion biosorption

Quantitative Analysis of X-ray Fluorescence Absorption and Emission for Thickness Determination of ALD-Grown Metal and Oxide Nanoscaled Films

This study describes the use of X-ray fluorescence spectroscopy (XRF) to determine the thickness of nanoscaled thin films of insulating oxides such as Al2O3, HfO2, and ZrO2, semiconducting oxides such as TiO2, ZnO, and metals like Pt, on silicon substrates synthesized by atomic layer deposition (ALD) technology. XRF thickness measurements were compared with the predicted layer thickness based on calculations from known ALD growth rates for each metal or metal oxide films. The ALD growth rates have been calibrated with TEM cross-sectional measurements of the resulting film thickness. The results showed good agreement between the two methods, indicating the XRF technique was successful. Quantitative XRF spectroscopy employing XRF absorption and emission line analysis has been demonstrated to be a powerful non-destructive tool for thickness determination of deposited high-k transition metal oxides and other technologically important nano-scaled thin films like Pt and other metal contacts and reveals new untapped application potential for XRF

Enhanced Removal of Lead by Chemically and Biologically Treated Carbonaceous Materials

Hybrid sorbents and biosorbents were synthesized via chemical and biological treatment of active carbon by simple and direct redox reaction followed by surface loading of baker's yeast. Surface functionality and morphology of chemically and biologically modified sorbents and biosorbents were studied by Fourier Transform Infrared analysis and scanning electron microscope imaging. Hybrid carbonaceous sorbents and biosorbents were characterized by excellent efficiency and superiority toward lead(II) sorption compared to blank active carbon providing a maximum sorption capacity of lead(II) ion as 500 μmol g−1. Sorption processes of lead(II) by these hybrid materials were investigated under the influence of several controlling parameters such as pH, contact time, mass of sorbent and biosorbent, lead(II) concentration, and foreign ions. Lead(II) sorption mechanisms were found to obey the Langmuir and BET isotherm models. The potential applications of chemically and biologically modified-active carbonaceous materials for removal and extraction of lead from real water matrices were also studied via a double-stage microcolumn technique. The results of this study were found to denote to superior recovery values of lead (95.0–99.0 ± 3.0–5.0%) by various carbonaceous-modified-bakers yeast biosorbents

Stability of High Band Gap P3HT: PCBM Organic Solar Cells Using TiOx Interfacial Layer

We fabricated a poly [3-hexylthiophene] (P3HT) and [6,6] -phenyl-C61-butyric acid methyl ester (PC61BM with the TiOx layer. We found that a solution based TiOx coated at a spin speed of 3000 rpm improved the photon absorption of the active layer. An optimized TiOx layer was also used as the interfacial layer to investigate the stability of P3HT: PC61BM OPC. After 70 days of storage, we observed that the short-circuit current density (JSC) dropped by 16.2%, fill factor (FF) dropped by 10.6%, and power conversion efficiency (PCE) dropped approximately by 25%, while the open-circuit voltage (VOC) remained relatively stable. We found that a solution based TiOx layer synthesized using a sol-gel chemistry method was very effective in protecting the active layer from degradation

Probing Nanoparticle Interactions in Cell Culture Media

Nanoparticle research is often performed in vitro with little emphasis on the potential role of cell culture medium. In this study, gold nanoparticle interactions with cell culture medium and two cancer cell lines (human T-cell leukemia Jurkat and human pancreatic carcinoma PANC1) were investigated. Gold nanoparticles of 10, 25, 50, and 100 nm in diameter at fixed mass concentration were tested. Size distributions and zeta potentials of gold nanoparticles suspended in deionized (DI) water and Dulbecco\u27s Modified Eagle\u27s Media (DMEM) supplemented with fetal calf serum (FCS) were measured using dynamic light scattering (DLS) technique. In DI water, particle size distributions exhibited peaks around their nominal diameters. However, the gold nanoparticles suspended in DMEM supplemented with FCS formed complexes around 100 nm, regardless of their nominal sizes. The DLS and UV-vis spectroscopy results indicate gold nanoparticle agglomeration in DMEM that is not supplemented by FCS. The zeta potential results indicate that protein rich FCS increases the dispersion quality of gold nanoparticle suspensions through steric effects. Cellular uptake of 25 and 50 nm gold nanoparticles by Jurkat and PANC1 cell lines were investigated using inductively coupled plasma-mass spectroscopy. The intracellular gold level of PANC1 cells was higher than that of Jurkat cells, where 50 nm particles enter cells at faster rates than the 25 nm particles

The Palestinian Terrestrial Vertebrate Fauna Preserved at the Biology Exhibitions of the Universities of the Gaza Strip

The Gaza Strip (365 km2 ) of Palestine (27,000 km2 ) is home to a wealth of terrestrial vertebrate fauna. Some of these faunistic species find their ways to preservation at the local universities. Hence, the current study comes to document the Palestinian terrestrial vertebrate fauna acquired by the biology exhibitions (BEs) of Al-Azhar University, Islamic University of Gaza and Al-Aqsa University that are located at the Gaza City of the Gaza Strip. The amphibians, reptiles, birds and mammals preserved at BEs of the universities in question were surveyed and scientifically classified during a three-month period extending from January to March, 2012. The study showed that all BEs of local universities are underdeveloped, lacking attention and suffer from specimen scarcity and good preservation. The BE at Al-Azhar University is the best in the arrangement and preservation of bird specimens. A total number of 200 specimens belonging to 54 terrestrial vertebrate fauna species, 39 families and 17 orders was recorded at BEs. Reptiles constituted 40.7% of the total species recorded, followed by birds (38.9%), mammals (14.8%) and amphibians (5.6%). The Islamic University of Gaza was considered the best in terms of the number of preserved species (39.8%), followed by Al-Azhar University (36.3%) and Al-Aqsa University (23.9%). The Common Toad (Bufo viridis) was the most preserved among the amphibian species recorded. Squamata was the biggest reptilian order, comprising 20 species (8 lizards and 12 snakes), with the Syrian Black Snake (Coluber jugularis asianus) was the commonest. The Palestine Viper (Vipera palaestinae) is endemic to Palestine and most venomous and dangerous to human health. The Great White Pelican (Pelecanus onocrotalus) was the largest Palestinian bird preserved at BE of Al-Azhar University. The Egyptian Mongoose (Herpestes ichneumon) and the Common Badger (Meles meles) were the biggest mammalian specimens preserved, while the Palestine Mole-rat (Spalax leucodon ehrenbergi) was the only Palestine endemic species encountered among the preserved mammals. Finally, the improvement of BEs of local universities and the construction of a Central Museum of Natural History is highly recommended in order to change the Palestinians’ attitudes toward a sustainable ecological conservation in the Gaza Strip

Global economic burden of unmet surgical need for appendicitis

Background: There is a substantial gap in provision of adequate surgical care in many low-and middle-income countries. This study aimed to identify the economic burden of unmet surgical need for the common condition of appendicitis. Methods: Data on the incidence of appendicitis from 170 countries and two different approaches were used to estimate numbers of patients who do not receive surgery: as a fixed proportion of the total unmet surgical need per country (approach 1); and based on country income status (approach 2). Indirect costs with current levels of access and local quality, and those if quality were at the standards of high-income countries, were estimated. A human capital approach was applied, focusing on the economic burden resulting from premature death and absenteeism. Results: Excess mortality was 4185 per 100 000 cases of appendicitis using approach 1 and 3448 per 100 000 using approach 2. The economic burden of continuing current levels of access and local quality was US $92 492 million using approach 1 and$73 141 million using approach 2. The economic burden of not providing surgical care to the standards of high-income countries was $95 004 million using approach 1 and$75 666 million using approach 2. The largest share of these costs resulted from premature death (97.7 per cent) and lack of access (97.0 per cent) in contrast to lack of quality. Conclusion: For a comparatively non-complex emergency condition such as appendicitis, increasing access to care should be prioritized. Although improving quality of care should not be neglected, increasing provision of care at current standards could reduce societal costs substantially

Laparoscopy in management of appendicitis in high-, middle-, and low-income countries: a multicenter, prospective, cohort study.

BACKGROUND: Appendicitis is the most common abdominal surgical emergency worldwide. Differences between high- and low-income settings in the availability of laparoscopic appendectomy, alternative management choices, and outcomes are poorly described. The aim was to identify variation in surgical management and outcomes of appendicitis within low-, middle-, and high-Human Development Index (HDI) countries worldwide. METHODS: This is a multicenter, international prospective cohort study. Consecutive sampling of patients undergoing emergency appendectomy over 6 months was conducted. Follow-up lasted 30 days. RESULTS: 4546 patients from 52 countries underwent appendectomy (2499 high-, 1540 middle-, and 507 low-HDI groups). Surgical site infection (SSI) rates were higher in low-HDI (OR 2.57, 95% CI 1.33-4.99, p = 0.005) but not middle-HDI countries (OR 1.38, 95% CI 0.76-2.52, p = 0.291), compared with high-HDI countries after adjustment. A laparoscopic approach was common in high-HDI countries (1693/2499, 67.7%), but infrequent in low-HDI (41/507, 8.1%) and middle-HDI (132/1540, 8.6%) groups. After accounting for case-mix, laparoscopy was still associated with fewer overall complications (OR 0.55, 95% CI 0.42-0.71, p < 0.001) and SSIs (OR 0.22, 95% CI 0.14-0.33, p < 0.001). In propensity-score matched groups within low-/middle-HDI countries, laparoscopy was still associated with fewer overall complications (OR 0.23 95% CI 0.11-0.44) and SSI (OR 0.21 95% CI 0.09-0.45). CONCLUSION: A laparoscopic approach is associated with better outcomes and availability appears to differ by country HDI. Despite the profound clinical, operational, and financial barriers to its widespread introduction, laparoscopy could significantly improve outcomes for patients in low-resource environments. TRIAL REGISTRATION: NCT02179112