A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking

Characterisation of particle flow using Positron Emission Particle Tracking (PEPT) is based on tracking the position of a single particle in a dynamic system. Recent developments in PEPT have facilitated tracking multiple particles aiming at improvements in data representation. Nevertheless for systems with a wide residence time distribution and/or dead zone, the conditions for getting representative data which could reflect the bulk behaviour of the powders need to be analysed and specified. In the present work, an attempt is made to simulate PEPT experiments for a paddle mixer using Discrete Element Method (DEM), with a view to investigate the effect of increasing the number of tracers on their time-averaged velocity distribution and whether it can represent the data on whole population of particles. The time averaged velocity distribution of the individual tracer particles (resembling simulated PEPT) is obtained and compared with the time averaged data on entire particle population. The DEM results indicate that for the investigated paddle mixer, it takes 251. s for one tracer to travel adequately in all the active space of the system. The instantaneous tracer velocity fluctuates around the average value obtained for all the particles, suggesting that the average tracer velocity is adequately representative of the average particle velocity in the system. The data of the PEPT experiment with one tracer with those of DEM with one tracer are in good agreement; however, DEM simulation suggests that increasing the number of tracers in the paddle mixer system does not influence the average velocity distribution. Furthermore, the velocity for all particles in the DEM shows a smooth distribution with a peak frequency of the velocity distribution that is lower than PEPT and DEM tracer. When tracking a single tracer in DEM or PEPT, it may not be detected to have zero velocity at any instant of time, whilst the data for all particles show that about 0.3% of particles are stagnant

Quantification of Visual Fixation in Multiple Sclerosis

Purpose: Eye movement abnormalities are common in multiple sclerosis (MS), and infrared oculography is a noninvasive method for quantification. This study aims to describe and classify abnormalities of visual fixation and their clinical relevance in MS. Methods: A validated standardized infrared oculography protocol, Demonstrate Eye Movement Networks with Saccades, was used for quantifying gaze stability during a fixation task in MS patients and healthy controls. Saccadic intrusions, gaze drift, and stability of fixation around the drift line were used to subclassify MS patients by performing receiver operating characteristic analyses of different parameters. The relationship between the presence of abnormalities of fixation and visual functioning was analyzed using logistic regression models, which was adjusted for possible confounders. Results: This cross-sectional study included 213 subjects with MS and 57 healthy controls. Square wave jerk abnormalities were present in 24% of MS patients. The prevalence was higher in more disabled subjects. The presence of larger square wave jerks (with a higher amplitude) in the MS patients was related to complaints of focusing on stationary objects (odds ratio, 2.2; P = 0.035) and a lower vision-related quality of life (odds ratio, 2.56; P = 0.012). Conclusions: This study provided a comprehensive overview of the characteristics of problems with visual fixation in subjects with MS. The most important and most common finding was the presence of larger square wave jerks during fixation, which was related to visual functioning in daily life

Saccadic fatigability in the oculomotor system

BACKGROUND: Fatigue is one of the most common and disabling symptoms in multiple sclerosis (MS), but challenging to quantify. This prospective study investigated if repeated saccadic eye movements enable measurement of oculomotor fatigability and can reflect on perceived fatigue in MS. METHODS: A standardized infrared oculography protocol (DEMoNS) was used for quantifying saccades in MS patients and healthy controls which included a first and a repeated pro-saccadic task (FPT and RPT). Saccadic peak velocity, latency, gain, area under the curve (AUC) and peak velocity divided by amplitude (Pv/Am) were calculated in both tasks. Perception based fatigue was assessed using the Checklist Individual Strength and the Neurological Fatigue Index (NFI). Linear regression models were used for assessing the relation between saccadic parameters and perceived fatigue. RESULTS: This study included 181 MS patients and 58 healthy controls subjects. From FPT to RPT, there were significant changes in saccadic parameters. Latency of both tasks was significantly related to NFI summary score (FPT: β = 0.022, p = .049, RPT: β 0.023, p = .021). These relationships were weakened after adjustment for Expanded Disability Status score (p > .05). There was however no significant group difference in changes in saccadic parameters. CONCLUSIONS: This study presents an objective and reproducible method for measuring saccadic fatigability. Saccadic fatigability was found to be of limited use in MS, and should be tested in conditions affecting ocular muscles or the neuromuscular junction

Revealing Nanoscale Solid-Solid Interfacial Phenomena for Long-Life and High-Energy All-Solid-State Batteries.

Enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against sulfide solid electrolytes. While protective oxide coating layers such as LiNbO3 (LNO) have been proposed, its precise working mechanisms are still not fully understood. Existing literature attributes reductions in interfacial impedance growth to the coating's ability to prevent interfacial reactions. However, its true nature is more complex, with cathode interfacial reactions and electrolyte electrochemical decomposition occurring simultaneously, making it difficult to decouple each effect. Herein, we utilized various advanced characterization tools and first-principles calculations to probe the interfacial phenomenon between solid electrolyte Li6PS5Cl (LPSCl) and high-voltage cathode LiNi0.85Co0.1Al0.05O2 (NCA). We segregated the effects of spontaneous reaction between LPSCl and NCA at the interface and quantified the intrinsic electrochemical decomposition of LPSCl during cell cycling. Both experimental and computational results demonstrated improved thermodynamic stability between NCA and LPSCl after incorporation of the LNO coating. Additionally, we revealed the in situ passivation effect of LPSCl electrochemical decomposition. When combined, both these phenomena occurring at the first charge cycle result in a stabilized interface, enabling long cyclability of all-solid-state batteries

Effects of Ambient Particulate Matter (PM2.5) Exposure on Calorie Intake and Appetite of Outdoor Workers

Malaysia has been experiencing smoke-haze episodes almost annually for the past few decades. PM2.5 is the main component in haze and causes harmful impacts on health due to its small aerodynamic size. This study aimed to explore the implications of PM2.5 exposure on the dietary intake of working individuals. Two phased 13-weeks follow-up study was conducted involving 440 participants, consisting of two cohorts of outdoor and indoor workers. Ambient PM2.5 concentrations were monitored using DustTrakTM DRX Aerosol Monitor. Data on Simplified Nutritional Appetite Questionnaire (SNAQ) and 24 h diet recall were collected weekly. The highest PM2.5 concentration of 122.90 ± 2.07 µg/m3 was recorded in August, and it vastly exceeded the standard value stipulated by US EPA and WHO. SNAQ scores and calorie intake were found to be significantly (p < 0.05) associated with changes in PM2.5 exposure of outdoor workers. Several moderate and positive correlations (R-value ranged from 0.4 to 0.6) were established between SNAQ scores, calorie intake and PM2.5 exposure. Overall findings suggested that long hours of PM2.5 exposure affect personal dietary intake, potentially increasing the risk of metabolic syndromes and other undesired health conditions. The current policy should be strengthened to safeguard the well-being of outdoor workers

Regulation of the fibrosis and angiogenesis promoter SPARC/osteonectin in human adipose tissue by weight change, leptin, insulin, and glucose

This is the final version of the article. Available from the publisher via the DOI in this record.OBJECTIVE: Matricellular Secreted Protein, Acidic and Rich in Cysteine (SPARC), originally discovered in bone as osteonectin, is a mediator of collagen deposition and promotes fibrosis. Adipose tissue collagen has recently been found to be linked with metabolic dysregulation. Therefore, we tested the hypothesis that SPARC in human adipose tissue is influenced by glucose metabolism and adipokines. RESEARCH DESIGN AND METHODS: Serum and adipose tissue biopsies were obtained from morbidly obese nondiabetic subjects undergoing bariatric surgery and lean control subjects for analysis of metabolic markers, SPARC, and various cytokines (RT-PCR). Additionally, 24 obese subjects underwent a very-low-calorie diet of 1,883 kJ (450 kcal)/day for 16 weeks and serial subcutaneous-abdominal-adipose tissue (SCAT) biopsies (weight loss: 28 +/- 3.7 kg). Another six lean subjects underwent fast-food-based hyperalimentation for 4 weeks (weight gain: 7.2 +/- 1.6 kg). Finally, visceral adipose tissue explants were cultured with recombinant leptin, insulin, and glucose, and SPARC mRNA and protein expression determined by Western blot analyses. RESULTS: SPARC expression in human adipose tissue correlated with fat mass and was higher in SCAT. Weight loss induced by very-low-calorie diet lowered SPARC expression by 33% and increased by 30% in adipose tissue of subjects gaining weight after a fast-food diet. SPARC expression was correlated with leptin independent of fat mass and correlated with homeostasis model assessment-insulin resistance. In vitro experiments showed that leptin and insulin potently increased SPARC production dose dependently in visceral adipose tissue explants, while glucose decreased SPARC protein. CONCLUSIONS: Our data suggest that SPARC expression is predominant in subcutaneous fat and its expression and secretion in adipose tissue are influenced by fat mass, leptin, insulin, and glucose. The profibrotic effects of SPARC may contribute to metabolic dysregulation in obesity.This work was supported by Diabetes UK, Swedish Research Council (11285), University Hospital of Linkoping Research Funds; Diabetes Research Centre of Linkoping University; and the Gamla Tjaenarinnor Foundation. No potential conflicts of interest relevant to this article were reported. Parts of this study were presented in abstract form at the 69th Scientific Sessions of the American Diabetes Association, New Orleans, Louisiana, 5–9 June 2009