Quantitative TEM imaging of the magnetostructural and phase transitions in FeRh thin film systems

Equi-atomic FeRh is a very interesting material as it undergoes a magnetostructural transition from an antiferromagnetic (AF) to a ferromagnetic (FM) phase between 75-105 °C. Its ability to present phase co-existence separated by domain walls (DWs) above room temperature provides immense potential for exploitation of their DW motion in spintronic devices. To be able to effectively control the DWs associated with AF/FM coexistence in FeRh thin films we must fully understand the magnetostructural transition and thermomagnetic behaviour of DWs at a localised scale. Here we present a transmission electron microscopy investigation of the transition in planar FeRh thin-film samples by combining differential phase contrast (DPC) magnetic imaging with in situ heating. We perform quantitative measurements from individual DWs as a function of temperature, showing that FeRh on NiAl exhibits thermomagnetic behaviour consistent with the transition from AF to FM. DPC imaging of an FeRh sample with HF-etched substrate reveals a state of AF/FM co-existence and shows the transition from AF to FM regions proceeds via nucleation of small vortex structures, which then grow by combining with newly nucleated vortex states into larger complex magnetic domains, until it is in a fully-FM state

Observation of thermally-induced magnetic relaxation in a magnetite grain using off-axis electron holography

A synthetic basalt comprising magnetic Fe3O4 grains (~ 50 nm to ~ 500 nm in diameter) is investigated using a range of complementary nano-characterisation techniques. Off-axis electron holography combined with in situ heating allowed for the visualisation of the thermally-induced magnetic relaxation of an Fe3O4 grain (~ 300 nm) from an irregular domain state into a vortex state at 550˚C, just below its Curie temperature, with the magnetic intensity of the vortex increasing on cooling

Sputter-engineering a first-order magnetic phase transition in sub-15-nm-thick single-crystal FeRh films

Equiatomic FeRh alloys undergo a fascinating first-order metamagnetic phase transition (FOMPT) just above room temperature, which has attracted reinvigorated interest for applications in spintronics. Until now, all attempts to grow nanothin FeRh alloy films have consistently shown that FeRh layers tend to grow in the Volmer-Weber growth mode. Here we show that sputter-grown sub-15-nm-thick FeRh alloy films deposited at low sputter-gas pressure, typically ∼0.1 Pa, onto (001)-oriented MgO substrates, grow in a peening-induced Frank-van der Merwe growth mode for FeRh film thicknesses above 5 nm, circumventing this major drawback. The bombardment of high-energy sputtered atoms, the atom-peening effect, induces a rebalancing between adsorbate-surface and adsorbate-adsorbate interactions, leading to the formation of a smooth continuous nanothin FeRh film. Chemical order in the films increases with the FeRh thickness, tFeRh, and varies monotonically from 0.75 up to 0.9. Specular x-ray diffraction scans around Bragg peaks show Pendellösung fringes for films with tFeRh≥5.2 nm, which reflects in smooth well-ordered densified single-crystal FeRh layers. The nanothin film's roughness varies from 0.6 down to about 0.1 nm as tFeRh increases, and scales linearly with the integral breadth of the rocking curve, proving its microstructured origin. Magnetometry shows that the FOMPT in the nanothin films is qualitatively similar to that of the bulk alloy, except for the thinnest film of 3.7 nm

Direct visualization of the magnetostructural phase transition in nanoscale FeRh thin films using differential phase contrast imaging

To advance the use of thermally activated magnetic materials in device applications it is necessary to examine their behavior on the localized scale operando conditions. Equiatomic FeRh undergoes a magnetostructural transition from an antiferromagnetic (AF) to a ferromagnetic (FM) phase above room temperature (∼350–380 K), and hence is considered a very desirable material for the next generation of nanomagnetic or spintronic devices. For this to be realized, we must fully understand the intricate details of the AF to FM transition and associated FM domain growth on the scale of their operation. Here we combine in situ heating with a comprehensive suite of advanced transmission electron microscopy techniques to investigate directly the magnetostructural transition in nanoscale FeRh thin films. Differential phase contrast imaging visualizes the stages of FM domain growth in both cross-sectional and planar FeRh thin films as a function of temperature. Small surface FM signals are also detected due to interfacial strain with the MgO substrate and Fe deficiency after HF etching of the substrate, providing a directional bias for FM domain growth. Our work provides high resolution imaging and quantitative measurements throughout the transition, which were previously inaccessible, and offers fundamental insight into their potential use in magnetic devices

Visualized effect of oxidation on magnetic recording fidelity in pseudo-single-domain magnetite particles

Magnetite (​Fe3O4) is an important magnetic mineral to Earth scientists, as it carries the dominant magnetic signature in rocks, and the understanding of its magnetic recording fidelity provides a critical tool in the field of palaeomagnetism. However, reliable interpretation of the recording fidelity of ​Fe3O4 particles is greatly diminished over time by progressive oxidation to less magnetic iron oxides, such as maghemite (γ-Fe2O3), with consequent alteration of remanent magnetization potentially having important geological significance. Here we use the complementary techniques of environmental transmission electron microscopy and off-axis electron holography to induce and visualize the effects of oxidation on the magnetization of individual nanoscale ​Fe3O4 particles as they transform towards γ-Fe2O3. Magnetic induction maps demonstrate a change in both strength and direction of remanent magnetization within ​Fe3O4 particles in the size range dominant in rocks, confirming that oxidation can modify the original stored magnetic information

Analysis of spatial variability for the development of reduced lead body surface maps

The spatial frequency of measurement points from standard ECG systems lacks accuracy to diagnose local variability in cardiac activity on the torso. Body Surface Mapping (BSM) improves this accuracy, but lacks the simplicity to be implemented in clinic on a regular basis. Reduced-lead BSM system improves applicability, but currently no standardization of lead reduction has been agreed upon. This research investigates the reduction of BSMs based on Lomb-Scargle Spectral Analysis to determine an appropriate electrode positioning through spatial frequency assessment. Based on the measurement of 13 healthy volunteers, a 128 electrode system could be reduced to a 36 electrode system and an 84 electrode system for ventricular and atrial activity measurements, respectively, with up to 10% loss of the full information provided by the original body surface potential map. Further research will investigate the appropriate positions of these electrodes and the effect of lead reduction for various cardiac abnormalities

A platform to guide catheter ablation of persistent atrial fibrillation using dominant frequency mapping

Dominant frequency (DF) mapping has been widely used to study the pathophysiology of atrial fibrillation (AF). In this study, a DF mapping system was developed to guide catheter ablation on electro-physiology (EP) procedures of persistent AF patients. The proposed platform has an automated graphical user interface (GUI) that processes non-contact unipolar electrograms (EGMs) recorded simultaneously by St. Jude Ensite Velocity System and provides 3D representation of the left atrium with DF behaviours and phase analysis

Propagation of meandering rotors surrounded by areas of high dominant frequency in persistent atrial fibrillation

Background: Identification of arrhythmogenic regions remains a challenge in persistent atrial fibrillation (persAF). Frequency and phase analysis allows identification of potential ablation targets. Objective: This study aimed to investigate the spatiotemporal association between dominant frequency (DF) and reentrant phase activation areas. Methods: A total of 8 persAF patients undergoing first-time catheter ablation procedure were enrolled. A noncontact array catheter was deployed into the left atrium (LA) and 2048 atrial fibrillation electrograms (AEGs) were acquired for 15 seconds following ventricular far-field cancellation. DF and phase singularity (PS) points were identified from the AEGs and tracked over consecutive frames. The spatiotemporal correlation of high DF areas and PS points was investigated, and the organization index at the core of high-DF areas was compared with that of their periphery. Results: The phase maps presented multiple simultaneous PS points that drift over the LA, with preferential locations. Regions displaying higher PS concentration showed a degree of colocalization with DF sites, with PS and DF regions being neighbors in 61.8% and with PS and DF regions overlapping in 36.8% of the time windows. Sites with highest DF showed a greater degree of organization at their core compared with their periphery. After ablation, the PS incidence reduced over the entire LA (36.2% ± 23.2%, P < .05), but especially at the pulmonary veins (78.6% ± 22.2%, P < .05). Conclusion: Multiple PS points drifting over the LA were identified with their clusters correlating spatially with the DF regions. After pulmonary vein isolation, the PS’s complexity was reduced, which supports the notion that PS sites represent areas of relevance to the atrial substrate

Spatiotemporal behaviour of high dominant frequency during persistent atrial fibrillation

Atrial electrograms (EGMs) with high dominant frequency (DF) are believed to represent atrial substrates with periodic activation responsible for the maintenance of persistent atrial fibrillation (persAF). This study aimed to assess the DF spatiotemporal behavior using high density noncontact mapping in persAF. For 8 patients undergoing left atrial (LA) persAF ablation, 2048 noncontact virtual unipolar EGMs were simultaneously collected and after the removal of ventricular far-field activity, Fourier based spectral analysis was used to identify DF on each EGM. Atrial areas with the highest DF (HDF, DF ± 0.25 Hz) were delimited in each frame for all EGMs, creating HDF `clouds'. Cumulative HDF clouds found at each frame were counted in the 3-D LA representation. To further assess the temporal stability of the cloud, the number of EGMs not hosting any HDF was determined for each window over time. The results show the number of occurrences of HDF clouds in the LA. The temporal behavior was analyzed by counting the number of positions on the 3-D representation of the LA not visited by HDF along time. Our results show HDF in persAF is not temporally stable and spatial distribution throughout the atria suggests the existence of driver regions with very rapid and regular activity maintaining AF. Therefore mapping the cumulative HDF might be an interesting strategy for ablation

Dynamic behavior of rotors during human persistent atrial fibrillation as observed using non-contact mapping

Rotors have been related to atrial fibrillation (AF) maintenance. We analyzed the behavior of rotors in persistent AF (persAF) utilizing a novel non-contact methodology and compared this to real time dominant frequency (DF) analysis. 2048 noncontact virtual unipolar atrial electrograms (VEGMs) were collected simultaneously (EnSite Array, St. Jude Medical) from 10 persAF patients (duration: 34 ± 25 months) undergoing left atrial (LA) ablation. After QRST-removal, FFT was used to identify the global DF of the LA (range 4-10 Hz; 1 s time-window; 50 % overlap; highest DF (HDF) (DF -0.25 Hz); up to 20 s/patient). The organization index (OI) was measured and phase was found via Hilbert-transform. Phase singularities (PSs) were tracked and were categorized according to their lifespan into short (lifespan 100 ms). A total of 4578 PSs were tracked. 5.05 % (IQR: 2.75 ~ 30.25 %) of the tracked PSs were long-lived and were observed in 11 % (IQR: 2.75 ~ 17.5 %) of the windows. The windows with rotors showed significantly higher HDF (mean ± SD, 8.0 ± 0.43 Hz vs 7.71 ± 0.50 Hz, p<; 0.0001) and lower OI (0.76 ± 0.04 vs 0.79 ± 0.03, p<; 0.0001) when compared with the short-lived PSs windows. During persAF, the LA showed distinct behaviors as characterized by rotors. Often, no rotors were observed during sustained AF and, when present, the rotors continually switched between organized and disorganized behaviors. Long-lived rotors correlated with higher atrial rates. Our results suggest that rotors are not the sole perpetuating mechanism in persAF