211 research outputs found
Practical considerations of the use of cross-weld and compact tension specimens creep data
This article gives an overview of the use of cross-weld and compact tension specimen modelling and analyses data to characterise creep behaviour of the high-temperature components. Cross-weld and compact tension specimens are used to describe creep crack growth in heterogeneous material structures, such as welds, and a number of factors that affect the creep behaviour of the structure, associated with this heterogeneity, have been identified. Creep data obtained from cross-weld specimen modelling are substantially affected by the material model used (e.g. Norton power law, Liu-Murakami), stress singularities that arise at the material interfaces and in between the columnar and equiaxed zones of the weld material, residual stresses which arise through the thickness of a multi-pass weld and the extraction orientation of the specimen relative to the welding direction. Creep crack growth data obtained from compact tension specimen testing and analyses are strongly dependent on the material models used (isotropic hardening models, Norton creep law, Liu/Murakami model, etc.), the path dependence of the C*-contour integral fracture parameter for certain heterogeneous material configurations and the accurate computation of material constants for damage mechanics models and the agreement between loading state to the actual stress state of the component to which the compact tension specimen creep data are applied to. This study examines typical results and observations from cross-weld specimen and compact tension specimen creep analyses, identifying the advantages, disadvantages and limitations of each specimen procedure
Theoretical basis and practical aspects of small specimen creep testing
Interest in and the application of small specimen creep test techniques are increasing. This is because it is only possible to obtain small samples of material in some situations, for example, the scoop samples that are removed from in-service components, the heat-affected zones that are created when welds are used to join components and the desire to produce only small amounts of material in alloy development programmes. It is therefore important to review and compare the theoretical basis and practical aspects of each of the small specimen creep testing methods, in order to clearly understand which of the methods is the best for any specific application. This article provides the theoretical basis for each commonly used test method
Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples
To date, the complex behaviour of small punch creep test (SPCT) specimens has not been completely understood, making the test hard to numerically model and the data difficult to interpret. This paper presents a novel numerical model able to generate results that match the experimental findings. For the first time, pre-strained uniaxial creep test data of a P91 steel at 600 °C have been implemented in a conveniently modified Liu and Murakami creep damage model in order to simulate the effects of the initial localised plasticity on the subsequent creep response of a small punch creep test specimen. Finite element (FE) results, in terms of creep displacement rate and time to failure, obtained by the modified Liu and Murakami model are in good agreement with experimental small punch creep test data. The rupture times obtained by the FE calculations which make use of the non-modified creep damage model are one order of magnitude shorter than those obtained by using the modified constitutive model. Although further investigation is needed, this novel approach has confirmed that the effects of initial localised plasticity, taking place in the early stages of small punch creep test, cannot be neglected. The new results, obtained by using the modified constitutive model, show a significant improvement with respect to those obtained by a state of the art creep damage constitutive model (the Liu and Murakami constitutive model) both in terms of minimum load-line displacement rate and time to rupture. The new modelling method will potentially lead to improved capability for SPCT data interpretatio
A study of high-energy proton induced damage in Cerium Fluoride in comparison with measurements in Lead Tungstate calorimeter crystals
A Cerium Fluoride crystal produced during early R&D studies for calorimetry
at the CERN Large Hadron Collider was exposed to a 24 GeV/c proton fluence
Phi_p=(2.78 +- 0.20) x 10EE13 cm-2 and, after one year of measurements tracking
its recovery, to a fluence Phi_p=(2.12 +- 0.15) x 10EE14 cm-2. Results on
proton-induced damage to the crystal and its spontaneous recovery after both
irradiations are presented here, along with some new, complementary data on
proton-damage in Lead Tungstate. A comparison with FLUKA Monte Carlo simulation
results is performed and a qualitative understanding of high-energy damage
mechanism is attempted.Comment: Submitted to Elsevier Science on May 6th, 2010; 11 pages, 8 figure
Monte Carlo simulation of virtual Compton scattering below pion threshold
This paper describes the Monte Carlo simulation developed specifically for
the VCS experiments below pion threshold that have been performed at MAMI and
JLab. This simulation generates events according to the (Bethe-Heitler + Born)
cross section behaviour and takes into account all relevant
resolution-deteriorating effects. It determines the `effective' solid angle for
the various experimental settings which are used for the precise determination
of photon electroproduction absolute cross section.Comment: 24 pages, 6 figures, to be published in Nuclear Instruments and
Methods in Physics Research, A One author adde
A new measurement of the structure functions and in virtual Compton scattering at 0.33 (GeV/c)
The cross section of the reaction has been measured at
(GeV/c). The experiment was performed using the electron beam
of the MAMI accelerator and the standard detector setup of the A1
Collaboration. The cross section is analyzed using the low-energy theorem for
virtual Compton scattering, yielding a new determination of the two structure
functions P_LL}-P_{TT}/epsilon and which are linear combinations of
the generalized polarizabilities of the proton. We find somewhat larger values
than in the previous investigation at the same . This difference, however,
is purely due to our more refined analysis of the data. The results tend to
confirm the non-trivial -evolution of the generalized polarizabilities and
call for more measurements in the low- region ( 1 (GeV/c)).Comment: 9 pages, 10 figures. EPJA version. slight revisions in the text and
figure
An overview of using small punch testing for mechanical characterization of MCrAlY bond coats
Considerable work has been carried out on overlay bond coats in the past several decades because of its excellent oxidation resistance and good adhesion between the top coat and superalloy substrate in the thermal barrier coating systems. Previous studies mainly focus on oxidation and diffusion behavior of these coatings. However, the mechanical behavior and the dominant fracture and deformation mechanisms of the overlay bond coats at different temperatures are still under investigation. Direct comparison between individual studies has not yet been achieved due to the fragmentary data on deposition processes, microstructure and, more apparently, the difficulty in accurately measuring the mechanical properties of thin coatings. One of the miniaturized specimen testing methods, small punch testing, appears to have the potential to provide such mechanical property measurements for thin coatings. The purpose of this paper is to give an overview of using small punch testing to evaluate material properties and to summarize the available mechanical properties that include the ductile-to-brittle transition and creep of MCrAlY bond coat alloys, in an attempt to understand the mechanical behavior of MCrAlY coatings over a broad temperature range
Genome-wide association study of depression phenotypes in UK Biobank identifies variants in excitatory synaptic pathways
Depression is a polygenic trait that causes extensive periods of disability. Previous genetic studies have identified common risk variants which have progressively increased in number with increasing sample sizes of the respective studies. Here, we conduct a genome-wide association study in 322,580 UK Biobank participants for three depression-related phenotypes: broad depression, probable major depressive disorder (MDD), and International Classification of Diseases (ICD, version 9 or 10)-coded MDD. We identify 17 independent loci that are significantly associated (P < 5 × 10−8) across the three phenotypes. The direction of effect of these loci is consistently replicated in an independent sample, with 14 loci likely representing novel findings. Gene sets are enriched in excitatory neurotransmission, mechanosensory behaviour, post synapse, neuron spine and dendrite functions. Our findings suggest that broad depression is the most tractable UK Biobank phenotype for discovering genes and gene sets that further our understanding of the biological pathways underlying depression
Transcriptomic analysis of human norovirus NS1-2 protein highlights a multifunctional role in murine monocytes
Genome-wide meta-analyses of stratified depression in Generation Scotland and UK Biobank
Abstract Few replicable genetic associations for Major Depressive Disorder (MDD) have been identified. Recent studies of MDD have identified common risk variants by using a broader phenotype definition in very large samples, or by reducing phenotypic and ancestral heterogeneity. We sought to ascertain whether it is more informative to maximize the sample size using data from all available cases and controls, or to use a sex or recurrent stratified subset of affected individuals. To test this, we compared heritability estimates, genetic correlation with other traits, variance explained by MDD polygenic score, and variants identified by genome-wide meta-analysis for broad and narrow MDD classifications in two large British cohorts - Generation Scotland and UK Biobank. Genome-wide meta-analysis of MDD in males yielded one genome-wide significant locus on 3p22.3, with three genes in this region (CRTAP, GLB1, and TMPPE) demonstrating a significant association in gene-based tests. Meta-analyzed MDD, recurrent MDD and female MDD yielded equivalent heritability estimates, showed no detectable difference in association with polygenic scores, and were each genetically correlated with six health-correlated traits (neuroticism, depressive symptoms, subjective well-being, MDD, a cross-disorder phenotype and Bipolar Disorder). Whilst stratified GWAS analysis revealed a genome-wide significant locus for male MDD, the lack of independent replication, and the consistent pattern of results in other MDD classifications suggests that phenotypic stratification using recurrence or sex in currently available sample sizes is currently weakly justified. Based upon existing studies and our findings, the strategy of maximizing sample sizes is likely to provide the greater gain
- …