The Anatomy of a Buried Submarine Hydrothermal System, Clark Volcano, Kermadec Arc, New Zealand

Clark volcano of the Kermadec arc, northeast of New Zealand, is a large stratovolcano comprised of two coalescing volcanic cones; an apparently younger, more coherent, twin-peaked edifice to the northwest and a relatively older, more degraded and tectonized cone to the southeast. High-resolution water column surveys show an active hydrothermal system at the summit of the NW cone largely along a ridge spur connecting the two peaks, with activity also noted at the head of scarps related to sector collapse. Clark is the only known cone volcano along the Kermadec arc to host sulfide mineralization. Volcano-scale gravity and magnetic surveys over Clark show that it is highly magnetized, and that a strong gravity gradient exists between the two edifices. Modeling suggests that a crustal-scale fault lies between these two edifices, with thinner crust beneath the NW cone. Locations of regional earthquake epicenters show a southwest-northeast trend bisecting the two Clark cones, striking northeastward into Tangaroa volcano. Detailed mapping of magnetics above the NW cone summit shows a highly magnetized “ring structure” ~350 m below the summit that is not apparent in the bathymetry; we believe this structure represents the top of a caldera. Oblate zones of low (weak) magnetization caused by hydrothermal fluid upflow, here termed “burn holes,” form a pattern in the regional magnetization resembling Swiss cheese. Presumably older burn holes occupy the inner margin of the ring structure and show no signs of hydrothermal activity, while younger burn holes are coincident with active venting on the summit. A combination of mineralogy, geochemistry, and seafloor mapping of the NW cone shows that hydrothermal activity today is largely manifest by widespread diffuse venting, with temperatures ranging between 56° and 106°C. Numerous, small (≤30 cm high) chimneys populate the summit area, with one site host to the ~7-m-tall “Twin Towers” chimneys with maximum vent fluid temperatures of 221°C (pH 4.9), consistent with δ³⁴S[subscript anhydrite-pyrite] values indicating formation temperatures of ~228° to 249°C. Mineralization is dominated by pyrite-marcasite-barite-anhydrite. Radiometric dating using the ²²⁸Ra/²²⁶Ra and ²²⁶Ra/Ba methods shows active chimneys to be <20 with most <2 years old. However, the chimneys at Clark show evidence for mixing with, and remobilizing of, barite as old as 19,000 years. This is consistent with Nd and Sr isotope compositions of Clark chimney and sulfate crust samples that indicate mixing of ~40% seawater with a vent fluid derived from low K lavas. Similarly, REE data show the hydrothermal fluids have interacted with a plagioclase-rich source rock. A holistic approach to the study of the Clark hydrothermal system has revealed a two-stage process whereby a caldera-forming volcanic event preceded a later cone-building event. This ensured a protracted (at least 20 ka yrs) history of hydrothermal activity and associated mineral deposition. If we assume at least 200-m-high walls for the postulated (buried) caldera, then hydrothermal fluids would have exited the seafloor 20 ka years ago at least 550 m deeper than they do today, with fluid discharge temperatures potentially much hotter (~350°C). Subsequent to caldera infilling, relatively porous volcaniclastic and other units making up the cone acted as large-scale filters, enabling ascending hydrothermal fluids to boil and mix with seawater subseafloor, effectively removing the metals (including remobilized Cu) in solution before they reached the seafloor. This has implications for estimates for the metal inventory of seafloor hydrothermal systems pertaining to arc hydrothermal systems.This is the publisher’s final pdf. The published article is copyrighted by the Society of Economic Geologists and can be found at: http://economicgeology.org

Cylindrical fibre orientation analysis by light scattering. Part 2: Experimental aspects

cited By 28International audienceno abstrac

Cylindrical fibre orientation analysis by light scattering. Part 1: Numerical aspects

cited By 31International audienceno abstrac

The Anatomy of a Buried Submarine Hydrothermal System, Clark Volcano, Kermadec Arc, New Zealand

Clark volcano of the Kermadec arc, northeast of New Zealand, is a large stratovolcano comprised of two coalescing volcanic cones; an apparently younger, more coherent, twin-peaked edifice to the northwest and a relatively older, more degraded and tectonized cone to the southeast. High-resolution water column surveys show an active hydrothermal system at the summit of the NW cone largely along a ridge spur connecting the two peaks, with activity also noted at the head of scarps related to sector collapse. Clark is the only known cone volcano along the Kermadec arc to host sulfide mineralization. Volcano-scale gravity and magnetic surveys over Clark show that it is highly magnetized, and that a strong gravity gradient exists between the two edifices. Modeling suggests that a crustal-scale fault lies between these two edifices, with thinner crust beneath the NW cone. Locations of regional earthquake epicenters show a southwest-northeast trend bisecting the two Clark cones, striking northeastward into Tangaroa volcano. Detailed mapping of magnetics above the NW cone summit shows a highly magnetized “ring structure” ~350 m below the summit that is not apparent in the bathymetry; we believe this structure represents the top of a caldera. Oblate zones of low (weak) magnetization caused by hydrothermal fluid upflow, here termed “burn holes,” form a pattern in the regional magnetization resembling Swiss cheese. Presumably older burn holes occupy the inner margin of the ring structure and show no signs of hydrothermal activity, while younger burn holes are coincident with active venting on the summit. A combination of mineralogy, geochemistry, and seafloor mapping of the NW cone shows that hydrothermal activity today is largely manifest by widespread diffuse venting, with temperatures ranging between 56° and 106°C. Numerous, small (≤30 cm high) chimneys populate the summit area, with one site host to the ~7-m-tall “Twin Towers” chimneys with maximum vent fluid temperatures of 221°C (pH 4.9), consistent with δ34Sanhydrite-pyrite values indicating formation temperatures of ~228° to 249°C. Mineralization is dominated by pyrite-marcasite-barite-anhydrite. Radiometric dating using the 228Ra/226Ra and 226Ra/Ba methods shows active chimneys to be <20 with most <2 years old. However, the chimneys at Clark show evidence for mixing with, and remobilizing of, barite as old as 19,000 years. This is consistent with Nd and Sr isotope compositions of Clark chimney and sulfate crust samples that indicate mixing of ~40% seawater with a vent fluid derived from low K lavas. Similarly, REE data show the hydrothermal fluids have interacted with a plagioclase-rich source rock. A holistic approach to the study of the Clark hydrothermal system has revealed a two-stage process whereby a caldera-forming volcanic event preceded a later cone-building event. This ensured a protracted (at least 20 ka yrs) history of hydrothermal activity and associated mineral deposition. If we assume at least 200-m-high walls for the postulated (buried) caldera, then hydrothermal fluids would have exited the seafloor 20 ka years ago at least 550 m deeper than they do today, with fluid discharge temperatures potentially much hotter (~350°C). Subsequent to caldera infilling, relatively porous volcaniclastic and other units making up the cone acted as large-scale filters, enabling ascending hydrothermal fluids to boil and mix with seawater subseafloor, effectively removing the metals (including remobilized Cu) in solution before they reached the seafloor. This has implications for estimates for the metal inventory of seafloor hydrothermal systems pertaining to arc hydrothermal systems

Geology, hydrothermal activity, and sea-floor massive sulfide mineralization at the rumble II west mafic caldera

Sea-floor imagery, volcanic rock, massive sulfide, and hydrothermal plume samples (\u3b43He, pH, dissolved Fe and Mn, and particulate chemistry) have been collected from the Rumble II West volcano, southern Kermadec arc, New Zealand. Rumble II West is a caldera volcano with an 3c3-km-diameter summit depression bounded by ring faults with a resurgent central cone. Rocks recovered to date are predominantly mafic in composition (i.e., basalt to basaltic andesite) with volumetrically lesser intermediate rocks (i.e., andesite). On the basis of its size, geometry, volcanic products, and composition, Rumble II West can be classified as a mafic caldera volcano. Rumble II West has a weak hydrothermal plume signature characterized by a small but detectable \u3b43He anomaly (25%). Time-series light scattering data though, obtained from vertical casts and tow-yos, do show that hydrothermal activity has increased in intensity between 1999 and 2011. Massive sulfides recovered from the eastern caldera wall and eastern flank of the central cone are primarily comprised of barite and chalcopyrite, with lesser sphalerite, pyrite, and traces of galena. The weak hydrothermal plume signal indicates that the volcano is in a volcanic-hydrothermal quiescent stage compared to other volcanoes along the southern Kermadec arc, although the preponderance of barite with massive sulfide mineralization indicates higher temperature venting in the past. Of the volcanoes along the Kermadec-Tonga arc known to host massive sulfides (i.e., Clark, Rumble II West, Brothers, Monowai, Volcano 19, and Volcano 1), the majority (five out of six) are dominantly mafic in composition and all but one of these mafic volcanoes form moderate-size to large calderas. To date, mafic calderas have been largely ignored as hosts to sea-floor massive sulfide deposits. That 75% of the presently known massive sulfide-bearing calderas along the arc are mafic in composition (the dacitic Brothers volcano is the exception) has important implications for sea-floor massive sulfide mineral exploration in the modern oceans and ancient rock record on land. \ua92012 Society of Economic Geologists, Inc

BH3 helix-derived biophotonic nanoswitches regulate cytochrome c release in permeabilised cells

Dynamic physical interactions between proteins underpin all key cellular processes and are a highly attractive area for the development of research tools and medicines. Protein–protein interactions frequently involve α-helical structures, but peptides matching the sequences of these structures usually do not fold correctly in isolation. Therefore, much research has focused on the creation of small peptides that adopt stable α-helical structures even in the absence of their intended protein targets. We show that short peptides alkylated with azobenzene crosslinkers can be used to photo-stimulate mitochondrial membrane depolarization and cytochrome c release in permeabilised cells, the initial events of the intrinsic apoptosis pathway