Thermal Properties of the LHCb VELO Silicon Sensors

This note reports on the thermal measurements performed on the first VELO production modules and on a test module with TPG inserts for improvement of the thermal coupling. The thermal behaviour of the modules and their cooling performance was tested in both dry air and under vacuum operation. The measurements showed that the CO_2 cooling system is able to provide the required operating conditions of the module (< 0 degrees Celsius). Thermal images of the VELO silicon showed a direct relation between the silicon temperature and the temperature sensors on the hybrid. A slight thermal improvement (1.6 degrees Celsius) was found when comparing vacuum operation of the test module with and without inserts

Protein identification by nanopore peptide profiling

Nanopores are single-molecule sensors used in nucleic acid analysis, whereas their applicability towards full protein identification has yet to be demonstrated. Here, we show that an engineered Fragaceatoxin C nanopore is capable of identifying individual proteins by measuring peptide spectra that are produced from hydrolyzed proteins. Using model proteins, we show that the spectra resulting from nanopore experiments and mass spectrometry share similar profiles, hence allowing protein fingerprinting. The intensity of individual peaks provides information on the concentration of individual peptides, indicating that this approach is quantitative. Our work shows the potential of a low-cost, portable nanopore-based analyzer for protein identification.</p

Protein identification by nanopore peptide profiling

Nanopores are single-molecule sensors used in nucleic acid analysis, whereas their applicability towards full protein identification has yet to be demonstrated. Here, we show that an engineered Fragaceatoxin C nanopore is capable of identifying individual proteins by measuring peptide spectra that are produced from hydrolyzed proteins. Using model proteins, we show that the spectra resulting from nanopore experiments and mass spectrometry share similar profiles, hence allowing protein fingerprinting. The intensity of individual peaks provides information on the concentration of individual peptides, indicating that this approach is quantitative. Our work shows the potential of a low-cost, portable nanopore-based analyzer for protein identification

Optimum single-gap solar cells for missions to Mercury

The power supply for space probes is usually based on photovoltaic (PV) systems. The first solar cells used in these systems were single-gap solar cells fabricated with Si and GaAs. Later on, multijunction solar cells (MJSC) based on III–V semiconductors were developed because of their higher efficiency and tolerance to a radiation environment [1]. All these solar cells have been based on semiconductors that fulfill the needs of most near-Earth missions. However, those same semiconductors fail to meet the needs of some other missions involving harsh environments such as high-intensity high-temperature (HIHT) environments [2]. In this work, we investigate which semiconductor material is optimum to implement single-gap solar cells for missions to Mercury, where HIHT conditions are expected. Because solar cell efficiency decreases as temperature increases [3], achieving high-efficiency photovoltaic conversion at HIHT conditions is a big challenge. Previous works have pointed out the need of using wide-bandgap semiconductors to reach this goal [4,5]. In this context, we will study the potential of solar cells based on AlxGa1−xAs, a well-known semiconductor whose physical properties have been extensively investigated. The limiting efficiency of these solar cells performing in near-Mercury missions will be calculated to determine the optimum composition for AlxGa1−xAs

Performance of the LHCb Vertex Detector Alignment Algorithm determined with Beam Test Data

LHCb is the dedicated heavy flavour experiment at the Large Hadron Collider at CERN. The partially assembled silicon vertex locator (VELO) of the LHCb experiment has been tested in a beam test. The data from this beam test have been used to determine the performance of the VELO alignment algorithm. The relative alignment of the two silicon sensors in a module and the relative alignment of the modules has been extracted. This alignment is shown to be accurate at a level of approximately 2 micron and 0.1 mrad for translations and rotations, respectively in the plane of the sensors. A single hit precision at normal track incidence of about 10 micron is obtained for the sensors. The alignment of the system is shown to be stable at better than the 10 micron level under air to vacuum pressure changes and mechanical movements of the assembled system.Comment: accepted for publication in NIM

Minority and mode conversion heating in (3He)-H JET plasma

Radio frequency (RF) heating experiments have recently been conducted in JET (He-3)-H plasmas. This type of plasmas will be used in ITER's non-activated operation phase. Whereas a companion paper in this same PPCF issue will discuss the RF heating scenario's at half the nominal magnetic field, this paper documents the heating performance in (He-3)-H plasmas at full field, with fundamental cyclotron heating of He-3 as the only possible ion heating scheme in view of the foreseen ITER antenna frequency bandwidth. Dominant electron heating with global heating efficiencies between 30% and 70% depending on the He-3 concentration were observed and mode conversion (MC) heating proved to be as efficient as He-3 minority heating. The unwanted presence of both He-4 and D in the discharges gave rise to 2 MC layers rather than a single one. This together with the fact that the location of the high-field side fast wave (FW) cutoff is a sensitive function of the parallel wave number and that one of the locations of the wave confluences critically depends on the He-3 concentration made the interpretation of the results, although more complex, very interesting: three regimes could be distinguished as a function of X[He-3]: (i) a regime at low concentration (X[He-3] < 1.8%) at which ion cyclotron resonance frequency (ICRF) heating is efficient, (ii) a regime at intermediate concentrations (1.8 < X[He-3] < 5%) in which the RF performance is degrading and ultimately becoming very poor, and finally (iii) a good heating regime at He-3 concentrations beyond 6%. In this latter regime, the heating efficiency did not critically depend on the actual concentration while at lower concentrations (X[He-3] < 4%) a bigger excursion in heating efficiency is observed and the estimates differ somewhat from shot to shot, also depending on whether local or global signals are chosen for the analysis. The different dynamics at the various concentrations can be traced back to the presence of 2 MC layers and their associated FW cutoffs residing inside the plasma at low He-3 concentration. One of these layers is approaching and crossing the low-field side plasma edge when 1.8 < X[He-3] < 5%. Adopting a minimization procedure to correlate the MC positions with the plasma composition reveals that the different behaviors observed are due to contamination of the plasma. Wave modeling not only supports this interpretation but also shows that moderate concentrations of D-like species significantly alter the overall wave behavior in He-3-H plasmas. Whereas numerical modeling yields quantitative information on the heating efficiency, analytical work gives a good description of the dominant underlying wave interaction physics

Quantification of Protein Glycosylation Using Nanopores

Although nanopores can be used for singlemolecule sequencing of nucleic acids using low-cost portable devices, the characterization of proteins and their modifications has yet to be established. Here, we show that hydrophilic or glycosylated peptides translocate too quickly across FraC nanopores to be recognized. However, high ionic strengths (i.e., 3 M LiCl) and low pH (i.e., pH 3) together with using a nanopore with a phenylalanine at its constriction allows the recognition of hydrophilic peptides, and to distinguish between mono- and diglycosylated peptides. Using these conditions, we devise a nanopore method to detect, characterize, and quantify posttranslational modifications in generic proteins, which is one of the pressing challenges in proteomic analysis

Light-trapping in photon enhanced thermionic emitters

A series of photonic crystal structures are optimized for a photon enhanced thermionic emitter. With realistic parameter values to describe a p-type GaAs device we find an efficiency above 10%. The light-trapping structures increases the performance by 2% over an optimal bilayer anti-reflective coating. We find a device efficiency very close to the case of a Lambertian absorber, but below its maximum performance. To prevent an efficiency below 10% the vacuum gap must be dimensioned according to the concentration factor of the solar irradiance