ESCRT-III mediated cell division in Sulfolobus acidocaldarius - a reconstitution perspective

In the framework of synthetic biology, it has become an intriguing question what would be the minimal representation of cell division machinery. Thus, it seems appropriate to compare how cell division is realized in different microorganisms. Inparticular, the cell division system of Crenarchaeota lacks certain proteins found in most bacteria and Euryarchaeota, such as FtsZ, MreB or the Min system. The Sulfolobaceae family encodes functional homologs of the eukaryotic proteins vacuolar protein sorting 4(Vps4) and endosomal sorting complex required for transport-III (ESCRT-III). ESCRT-III is essential for several eukaryotic pathways, e.g., budding of intraluminal vesicles, or cytokinesis, whereas Vps4 dissociates the ESCRT-III complex from the membrane. Cell Division A(CdvA) is required for the recruitment of crenarchaeal ESCRT-III proteins to the membrane at mid-cell. The proteins polymerize and form a smaller structure during constriction. Thus, ESCRT-III mediated cell division in Sulfolobus acidocaldarius shows functional analogies to the Z ring observed in prokaryotes like Escherichia coli, which has recently begun to be reconstituted in vitro. In this short perspective, we discuss the possibility of building such an in vitro cell division system on basis of archaeal ESCRT-III

Free energies, vacancy concentrations and density distribution anisotropies in hard--sphere crystals: A combined density functional and simulation study

We perform a comparative study of the free energies and the density distributions in hard sphere crystals using Monte Carlo simulations and density functional theory (employing Fundamental Measure functionals). Using a recently introduced technique (Schilling and Schmid, J. Chem. Phys 131, 231102 (2009)) we obtain crystal free energies to a high precision. The free energies from Fundamental Measure theory are in good agreement with the simulation results and demonstrate the applicability of these functionals to the treatment of other problems involving crystallization. The agreement between FMT and simulations on the level of the free energies is also reflected in the density distributions around single lattice sites. Overall, the peak widths and anisotropy signs for different lattice directions agree, however, it is found that Fundamental Measure theory gives slightly narrower peaks with more anisotropy than seen in the simulations. Among the three types of Fundamental Measure functionals studied, only the White Bear II functional (Hansen-Goos and Roth, J. Phys.: Condens. Matter 18, 8413 (2006)) exhibits sensible results for the equilibrium vacancy concentration and a physical behavior of the chemical potential in crystals constrained by a fixed vacancy concentration.Comment: 17 pages, submitted to Phys. Rev.

Modellierung und Simulation einer elastischen Weltraumstruktur

  &nbsp

Comparison of Finnish meat inspection records and average daily gain for cattle herds differing in Mycoplasma bovis test-status

Detecting Mycoplasma bovis on cattle farms represents a challenge in the absence of an outbreak or cases of M. bovis mastitis, yet identification of an infection is essential to control the spread of the disease successfully. The objectives of this study were: (1) to determine whether meat inspection records can aid identification of cattle farms supporting M. bovis infection, and (2) to compare the average daily weight gain estimated from carcass weight for cattle originating from farms differing in M. bovis test-status. Meat inspection records were collected from two abattoirs in 2015; 80 677 animals in total. All the dairy and mixed breed cows and bulls used for meat production were categorized according to known M. bovis infection status of the farms from which the cattle were derived; positive, contact or control farms. The associations between animals from different M. bovis categories and lung lesions of bulls and cows (pneumonia and pleuritis), identified during meat inspection, and estimated average daily gain (ADG) of bulls, were investigated. The odds ratios for lung lesions, especially pleuritis, were higher in M. bovis test-positive or contact farms compared with control farms. Additionally, odds ratios for pleuritis were higher among animals from M. bovis test-positive farms and animals from contact slaughtering farms originating from M. bovis-free rearing farms. Bulls originating from M. bovis test-positive farms had higher estimated average daily gain than cattle from control farms. Meat inspection records can be used alongside other methods to detect M. bovis-positive farms where M. bovis causes lung lesions. (C) 2019 The Authors. Published by Elsevier Ltd.Peer reviewe

Viral and Bacterial Pathogens in Bovine Respiratory Disease in Finland

Pathogens causing bovine respiratory tract disease in Finland were investigated. Eighteen cattle herds with bovine respiratory disease were included. Five diseased calves from each farm were chosen for closer examination and tracheobronchial lavage. Blood samples were taken from the calves at the time of the investigation and from 86 calves 3–4 weeks later. In addition, 6–10 blood samples from animals of different ages were collected from each herd, resulting in 169 samples. Serum samples were tested for antibodies to bovine parainfluenza virus-3 (PIV-3), bovine respiratory syncytial virus (BRSV), bovine coronavirus (BCV), bovine adenovirus-3 (BAV-3) and bovine adenovirus-7 (BAV-7). About one third of the samples were also tested for antibodies to bovine virus diarrhoea virus (BVDV) with negative results. Bacteria were cultured from lavage fluid and in vitro susceptibility to selected antimicrobials was tested. According to serological findings, PIV-3, BAV-7, BAV-3, BCV and BRSV are common pathogens in Finnish cattle with respiratory problems. A titre rise especially for BAV-7 and BAV-3, the dual growth of Mycoplasma dispar and Pasteurella multocida, were typical findings in diseased calves. Pasteurella sp. strains showed no resistance to tested antimicrobials. Mycoplasma bovis and Mannheimia haemolytica were not found

Маркетинговая деятельность предприятия малого и среднего бизнеса в Китае – условие выхода на новые сегменты рынка

Объектом исследования является компания Хин Шинг. Предмет исследования – формирование маркетинговой стратегии деятельности компании Хин Шинг. Целью работы является построение стратегии маркетингового развития деятельности предприятия на примере компании Хин Шинг, Китай. В результате исследования были выявлены ключевые направления маркетинговой деятельности предприятия, проанализирована внутренняя среда компании и разработаны дополнительные маркетинговые инструменты, направленные на продвижение продукции.The object of research is the company Hing Shing. Subject of research - the formation of a marketing strategy Hing Shing company. The aim is to build a marketing strategy of development of the enterprise on an example of the company Hing Shing, China. The study identified the key areas of marketing activity of the enterprise, analyze the internal environment of the company and to develop additional marketing tools aimed at the promotion

A tri-dimensional approach for auditing brand loyalty

Over the past twenty years brand loyalty has been an important topic for both marketing practitioners and academics. While practitioners have produced proprietary brand loyalty audit models, there has been little academic research to make transparent the methodology that underpins these audits and to enable practitioners to understand, develop and conduct their own audits. In this paper, we propose a framework for a brand loyalty audit that uses a tri-dimensional approach to brand loyalty, which includes behavioural loyalty and the two components of attitudinal loyalty: emotional and cognitive loyalty. In allowing for different levels and intensity of brand loyalty, this tri-dimensional approach is important from a managerial perspective. It means that loyalty strategies that arise from a brand audit can be made more effective by targeting the market segments that demonstrate the most appropriate combination of brand loyalty components. We propose a matrix with three dimensions (emotional, cognitive and behavioural loyalty) and two levels (high and low loyalty) to facilitate a brand loyalty audit. To demonstrate this matrix, we use the example of financial services, in particular a rewards-based credit card

Longitudinal flow evolution and turbulence structure of dynamically similar, sustained, saline density and turbidity currents

Experimental results are presented concerning flow evolution and turbulence structure of sustained saline and turbidity flows generated on 0°, 3°, 6°, and 9° sloping ramps that terminate abruptly onto a horizontal floor. Two-component velocity and current density were measured with an ultrasonic Doppler velocity profiler and siphon sampler on the slope, just beyond the slope break and downstream on the horizontal floor. Three main factors influence longitudinal flow evolution and turbulence structure: sediment transport and sedimentation, slope angle, and the presence of a slope break. These controls interact differently depending on flow type. Sediment transport is accompanied by an inertial fluid reaction that enhances Reynolds stresses in turbidity flows. Thus turbidity flows mix more vigorously than equivalent saline density flows. For saline flows, turbulent kinetic energy is dependent on slope, and rapid deceleration occurs on the horizontal floor. For turbidity flows, normalized turbulent kinetic energy increases downstream, and mean streamwise deceleration is reduced compared with saline flows. The slope break causes mean bed-normal velocity of turbidity flows to become negative and have a gentler gradient compared with other locations. A reduction of peak Reynolds normal stress in the bed-normal direction is accompanied by an increase in turbulent accelerations across the rest of the flow thickness. Thus the presence of particles acts to increase Reynolds normal stresses independently of gradients of mean velocity, and sediment transport increases across the break in slope. The experiments illustrate that saline density currents may not be good dynamic analogues for natural turbidity currents

The Sunrise Mission

The first science flight of the balloon-borne \Sunrise telescope took place in June 2009 from ESRANGE (near Kiruna/Sweden) to Somerset Island in northern Canada. We describe the scientific aims and mission concept of the project and give an overview and a description of the various hardware components: the 1-m main telescope with its postfocus science instruments (the UV filter imager SuFI and the imaging vector magnetograph IMaX) and support instruments (image stabilizing and light distribution system ISLiD and correlating wavefront sensor CWS), the optomechanical support structure and the instrument mounting concept, the gondola structure and the power, pointing, and telemetry systems, and the general electronics architecture. We also explain the optimization of the structural and thermal design of the complete payload. The preparations for the science flight are described, including AIV and ground calibration of the instruments. The course of events during the science flight is outlined, up to the recovery activities. Finally, the in-flight performance of the instrumentation is briefly summarized.Comment: 35 pages, 17 figure