76 research outputs found

    Ambient fabrication of organic-inorganic hybrid Perovskite solar cells

    Get PDF
    Organic–inorganic hybrid perovskite solar cells (PSCs) have attracted significant attention in recent years due to their high‐power conversion efficiency, simple fabrication, and low material cost. However, due to their high sensitivity to moisture and oxygen, high efficiency PSCs are mainly constructed in an inert environment. This has led to significant concerns associated with the long‐term stability and manufacturing costs, which are some of the major limitations for the commercialization of this cutting‐edge technology. Over the past few years, excellent progress in fabricating PSCs in ambient conditions has been made. These advancements have drawn considerable research interest in the photovoltaic community and shown great promise for the successful commercialization of efficient and stable PSCs. In this review, after providing an overview to the influence of an ambient fabrication environment on perovskite films, recent advances in fabricating efficient and stable PSCs in ambient conditions are discussed. Along with discussing the underlying challenges and limitations, the most appropriate strategies to fabricate efficient PSCs under ambient conditions are summarized along with multiple roadmaps to assist in the future development of this technology

    Carbon nanotubes in TiO2 nanofiber photoelectrodes for high-performance perovskite solar cells

    Get PDF
    1D semiconducting oxides are unique structures that have been widely used for photovoltaic (PV) devices due to their capability to provide a direct pathway for charge transport. In addition, carbon nanotubes (CNTs) have played multifunctional roles in a range of PV cells because of their fascinating properties. Herein, the influence of CNTs on the PV performance of 1D titanium dioxide nanofiber (TiO2 NF) photoelectrode perovskite solar cells (PSCs) is systematically explored. Among the different types of CNTs, single‐walled CNTs (SWCNTs) incorporated in the TiO2 NF photoelectrode PSCs show a significant enhancement (≈40%) in the power conversion efficiency (PCE) as compared to control cells. SWCNTs incorporated in TiO2 NFs provide a fast electron transfer within the photoelectrode, resulting in an increase in the short‐circuit current (J sc) value. On the basis of our theoretical calculations, the improved open‐circuit voltage (V oc) of the cells can be attributed to a shift in energy level of the photoelectrodes after the introduction of SWCNTs. Furthermore, it is found that the incorporation of SWCNTs into TiO2 NFs reduces the hysteresis effect and improves the stability of the PSC devices. In this study, the best performing PSC device constructed with SWCNT structures achieves a PCE of 14.03%

    Carbon nanotubes in TiO<sub>2</sub> nanofiber photoelectrodes for high-performance perovskite solar cells

    Get PDF
    1D semiconducting oxides are unique structures that have been widely used for photovoltaic (PV) devices due to their capability to provide a direct pathway for charge transport. In addition, carbon nanotubes (CNTs) have played multifunctional roles in a range of PV cells because of their fascinating properties. Herein, the influence of CNTs on the PV performance of 1D titanium dioxide nanofiber (TiO2 NF) photoelectrode perovskite solar cells (PSCs) is systematically explored. Among the different types of CNTs, single-walled CNTs (SWCNTs) incorporated in the TiO2 NF photoelectrode PSCs show a significant enhancement (≈40%) in the power conversion efficiency (PCE) as compared to control cells. SWCNTs incorporated in TiO2 NFs provide a fast electron transfer within the photoelectrode, resulting in an increase in the short-circuit current (J sc) value. On the basis of our theoretical calculations, the improved open-circuit voltage (V oc) of the cells can be attributed to a shift in energy level of the photoelectrodes after the introduction of SWCNTs. Furthermore, it is found that the incorporation of SWCNTs into TiO2 NFs reduces the hysteresis effect and improves the stability of the PSC devices. In this study, the best performing PSC device constructed with SWCNT structures achieves a PCE of 14.03%

    Impact of 13-Valent Pneumococcal Conjugate Vaccine on Colonization and Invasive Disease in Cambodian Children

    Get PDF
    Background Cambodia introduced the 13-valent pneumococcal conjugate vaccine (PCV13) in January 2015 using a 3 + 0 dosing schedule and no catch-up campaign. We investigated the effects of this introduction on pneumococcal colonization and invasive disease in children aged <5 years. Methods There were 6 colonization surveys done between January 2014 and January 2018 in children attending the outpatient department of a nongovernmental pediatric hospital in Siem Reap. Nasopharyngeal swabs were analyzed by phenotypic and genotypic methods to detect pneumococcal serotypes and antimicrobial resistance. Invasive pneumococcal disease (IPD) data for January 2012–December 2018 were retrieved from hospital databases. Pre-PCV IPD data and pre-/post-PCV colonization data were modelled to estimate vaccine effectiveness (VE). Results Comparing 2014 with 2016–2018, and using adjusted prevalence ratios, VE estimates for colonization were 16.6% (95% confidence interval [CI] 10.6–21.8) for all pneumococci and 39.2% (95% CI 26.7–46.1) for vaccine serotype (VT) pneumococci. There was a 26.0% (95% CI 17.7–33.0) decrease in multidrug-resistant pneumococcal colonization. The IPD incidence was estimated to have declined by 26.4% (95% CI 14.4–35.8) by 2018, with a decrease of 36.3% (95% CI 23.8–46.9) for VT IPD and an increase of 101.4% (95% CI 62.0–145.4) for non-VT IPD. Conclusions Following PCV13 introduction into the Cambodian immunization schedule, there have been declines in VT pneumococcal colonization and disease in children aged <5 years. Modelling of dominant serotype colonization data produced plausible VE estimates

    Origin of performance enhancement in TiO2-carbon nanotube composite perovskite solar cells

    Get PDF
    Carbon nanotubes are shown to be beneficial additives to perovskite solar cells, and the inclusion of such nanomaterials will continue to play a crucial role in the push toward developing efficient and stable device architectures. Herein, titanium dioxide/carbon nanotube composite perovskite solar cells are fabricated, and device performance parameters are correlated with spectroscopic signatures of the materials to understand the origin of performance enhancement. By probing the charge carrier dynamics with photoluminescence and femtosecond transient absorption spectroscopy, the results indicate that charge transfer is not improved by the presence of the carbon nanotubes. Instead, carbon nanotubes are shown to passivate the electronic defect states within the titanium dioxide, which can lead to stronger radiative recombination in the titanium dioxide/carbon nanotube films. The defect passivation allows the perovskite solar cells made using an optimized titanium dioxide/carbon nanotube composite to achieve a peak power conversion efficiency of 20.4% (19% stabilized), which is one of the highest values reported for perovskite solar cells not incorporating a mixed cation light absorbing layer. The results discuss new fundamental understandings for the role of carbon nanomaterials in perovskite solar cells and present a significant step forward in advancing the field of high‐performance photovoltaics

    Genome-wide association analysis with selective genotyping identifies candidate loci for adult height at 8q21.13 and 15q22.33-q23 in Mongolians

    Get PDF
    We performed a genome-wide association study with 23,465 microsatellite markers to identify genes related to adult height. Selective genotyping was applied to extremely tall and extremely short individuals from the Khalkh-Mongolian population. Two loci, 8q21.13 and 15q22.33, which showed the strongest association with microsatellites were subjected to further analyses of SNPs in 782 tall and 773 short individuals. The most significant association was observed with SNP rs2220456 at 8q21.13 (P = 0.000016). In the LD block at 15q22.32, SNP rs8038652 located in intron 1 of IQCH was strongly associated (P = 0.0003), especially the AA genotype of the SNP under a recessive model was strongly associated with adult height (P = 0.000046)

    Rapid assessment of Hib disease burden in Vietnam

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Several countries have applied the <it>Haemophilus influenzae </it>type b (Hib) rapid assessment tool (RAT) to estimate the burden of Hib disease where resources for hospital- or population-based surveillance are limited. In Vietnam, we used the Hib RAT to estimate the burden of Hib pneumonia and meningitis prior to Hib vaccine introduction.</p> <p>Methods</p> <p>Laboratory, hospitalization and mortality data were collected for the period January 2004 through December 2005 from five representative hospitals. Based on the WHO Hib RAT protocol, standardized MS Excel spreadsheets were completed to generate meningitis and pneumonia case and death figures.</p> <p>Results</p> <p>We found 35 to 77 Hib meningitis deaths and 441 to 957 Hib pneumonia deaths among children < 5 years of age annually in Vietnam. Overall, the incidence of Hib meningitis was estimated at 18/100,000 (95% confidence interval, CI, 15.1-21.6). The estimated Hib meningitis incidence in children < 5 years age was higher in Ho Chi Minh City (22.5/100,000 [95% CI, 18.4-27.5]) compared to Hanoi (9.8/100,000 [95% CI, 6.5-14.8]). The Hib RAT suggests that there are a total of 883 to 1,915 cases of Hib meningitis and 4,414 to 9,574 cases of Hib pneumonia per year in Vietnam.</p> <p>Conclusions</p> <p>In Hanoi, the estimated incidence of Hib meningitis for children < 5 years of age was similar to that described in previous population-based studies of Hib meningitis conducted from 1999 through 2002. Results from the Hib RAT suggest that there is a substantial, yet unmeasured, disease burden associated with Hib pneumonia in Vietnamese children.</p

    Survey of childhood empyema in Asia: Implications for detecting the unmeasured burden of culture-negative bacterial disease

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Parapneumonic empyema continues to be a disease of significant morbidity and mortality among children despite recent advances in medical management. To date, only a limited number of studies have assessed the burden of empyema in Asia.</p> <p>Methods</p> <p>We surveyed medical records of four representative large pediatric hospitals in China, Korea, Taiwan and Vietnam using <it>ICD</it>-10 diagnostic codes to identify children <16 years of age hospitalized with empyema or pleural effusion from 1995 to 2005. We also accessed microbiology records of cultured empyema and pleural effusion specimens to describe the trends in the epidemiology and microbiology of empyema.</p> <p>Results</p> <p>During the study period, we identified 1,379 children diagnosed with empyema or pleural effusion (China, n = 461; Korea, n = 134; Taiwan, n = 119; Vietnam, n = 665). Diagnoses of pleural effusion (n = 1,074) were 3.5 times more common than of empyema (n = 305), although the relative proportions of empyema and pleural effusion noted in hospital records varied widely between the four sites, most likely because of marked differences in coding practices. Although pleural effusions were reported more often than empyema, children with empyema were more likely to have a cultured pathogen. In addition, we found that median age and gender distribution of children with these conditions were similar across the four countries. Among 1,379 empyema and pleural effusion specimens, 401 (29%) were culture positive. <it>Staphylococcus aureus </it>(n = 126) was the most common organism isolated, followed by <it>Streptococcus pneumoniae </it>(n = 83), <it>Pseudomonas aeruginosa </it>(n = 37) and <it>Klebsiella </it>(n = 35) and <it>Acinetobacter </it>species (n = 34).</p> <p>Conclusion</p> <p>The age and gender distribution of empyema and pleural effusion in children in these countries are similar to the US and Western Europe. <it>S. pneumoniae </it>was the second leading bacterial cause of empyema and pleural effusion among Asian children. The high proportion of culture-negative specimens among patients with pleural effusion or empyema suggests that culture may not be a sufficiently sensitive diagnostic method to determine etiology in the majority of cases. Future prospective studies in different countries would benefit from standardized case definitions and coding practices for empyema. In addition, more sensitive diagnostic methods would improve detection of pathogens and could result in better prevention, treatment and outcomes of this severe disease.</p

    Aetiology and incidence of diarrhoea requiring hospitalisation in children under 5 years of age in 28 low-income and middle-income countries: findings from the Global Pediatric Diarrhea Surveillance network.

    Get PDF
    Introduction: Diarrhoea remains a leading cause of child morbidity and mortality. Systematically collected and analysed data on the aetiology of hospitalised diarrhoea in low-income and middle-income countries are needed to prioritise interventions. Methods: We established the Global Pediatric Diarrhea Surveillance network, in which children under 5 years hospitalised with diarrhoea were enrolled at 33 sentinel surveillance hospitals in 28 low-income and middle-income countries. Randomly selected stool specimens were tested by quantitative PCR for 16 causes of diarrhoea. We estimated pathogen-specific attributable burdens of diarrhoeal hospitalisations and deaths. We incorporated country-level incidence to estimate the number of pathogen-specific deaths on a global scale. Results: During 2017–2018, 29 502 diarrhoea hospitalisations were enrolled, of which 5465 were randomly selected and tested. Rotavirus was the leading cause of diarrhoea requiring hospitalisation (attributable fraction (AF) 33.3%; 95% CI 27.7 to 40.3), followed by Shigella (9.7%; 95% CI 7.7 to 11.6), norovirus (6.5%; 95% CI 5.4 to 7.6) and adenovirus 40/41 (5.5%; 95% CI 4.4 to 6.7). Rotavirus was the leading cause of hospitalised diarrhoea in all regions except the Americas, where the leading aetiologies were Shigella (19.2%; 95% CI 11.4 to 28.1) and norovirus (22.2%; 95% CI 17.5 to 27.9) in Central and South America, respectively. The proportion of hospitalisations attributable to rotavirus was approximately 50% lower in sites that had introduced rotavirus vaccine (AF 20.8%; 95% CI 18.0 to 24.1) compared with sites that had not (42.1%; 95% CI 33.2 to 53.4). Globally, we estimated 208 009 annual rotavirus-attributable deaths (95% CI 169 561 to 259 216), 62 853 Shigella-attributable deaths (95% CI 48 656 to 78 805), 36 922 adenovirus 40/41-attributable deaths (95% CI 28 469 to 46 672) and 35 914 norovirus-attributable deaths (95% CI 27 258 to 46 516). Conclusions: Despite the substantial impact of rotavirus vaccine introduction, rotavirus remained the leading cause of paediatric diarrhoea hospitalisations. Improving the efficacy and coverage of rotavirus vaccination and prioritising interventions against Shigella, norovirus and adenovirus could further reduce diarrhoea morbidity and mortality
    corecore