An investigation into the unusual linkage isomerization and nitrite reduction activity of a novel tris(2-pyridyl) copper complex

The copper-containing nitrite reductases (CuNIRs) are a class of enzymes that mediate the reduction of nitrite to nitric oxide in biological systems. Metal–ligand complexes that reproduce the salient features of the active site of CuNIRs are therefore of fundamental interest, both for elucidating the possible mode of action of the enzymes and for developing biomimetic catalysts for nitrite reduction. Herein, we describe the synthesis and characterization of a new tris(2-pyridyl) copper complex ([Cu1(NO2)2]) that binds two molecules of nitrite, and displays all three of the common binding modes for NO2−, with one nitrite bound in an asymmetric quasi-bidentate κ2-ONO manner and the other bound in a monodentate fashion with a linkage isomerism between the κ1-ONO and κ1-NO2 binding modes. We use density functional theory to help rationalize the presence of all three of these linkage isomers in one compound, before assessing the redox activity of [Cu1(NO2)2]. These latter studies show that the complex is not a competent nitrite reduction electrocatalyst in non-aqueous solvent, even in the presence of additional proton donors, a finding which may have implications for the design of biomimetic catalysts for nitrite reduction

Towards a Better Understanding of the Electrochemical Synthesis of 2,5-dicarboxy-2,5-dihydrofurans: Structure, Mechanism and Influence over Stereochemistry

2,5-Dicarboxy-2,5-dihydrofurans are key constituents of a number of natural products and have roles as intermediates in the formation of other such compounds of interest. Typically, these species are synthesised using Pb(IV) salts. Electrochemical syntheses of 2,5-diacetoxy-2,5-dihydrofuran that do not require the use of lead have been reported, but hitherto most of these studies have lacked sufficient experimental detail for this procedure to be more widely adopted. Moreover, no electrochemical study has yet reported the ratio of cis and trans isomers produced. Herein, we compare the chemical, lead-based route to 2,5-diacetoxy-2,5-dihydrofuran with a fully-described electrochemical synthesis method. In doing so, we have discovered that the cis and trans isomers of this compound were previously incorrectly assigned in the literature, an error that we correct by obtaining the crystal structure of cis-2,5-diacetoxy-2,5-dihydrofuran. This allows the ratios of the isomers as prepared by the chemical (2:1 cis:trans) and electrochemical (7:5 cis:trans) methods to be obtained. Through experimental and computational insights, we propose a mechanism for the electrochemical synthesis of 2,5-dicarboxy-2,5-dihydrofurans and go some way towards validating this mechanism by synthesising 2,5-dibutoxy-2,5-dihydrofuran electrochemically for the first time. We hope that these findings will provide some greater clarity to the literature surrounding the electrosynthesis and potential applications of 2,5-dicarboxy-2,5-dihydrofurans

Towards a better understanding of the electrosynthesis of 2,5-dicarboxy-2,5-dihydrofurans: structure, mechanism and influence over stereochemistry

2,5-Dicarboxy-2,5-dihydrofurans are key constituents of a number of natural products and have roles as intermediates in the formation of other such compounds of interest. Typically, these species are synthesized using toxic Pb(IV) salts. Electrochemical syntheses of 2,5-diacetoxy-2,5-dihydrofuran that do not require the use of lead have been reported, but a general lack of experimental detail has prevented these procedures from being more widely adopted. Moreover, no electrochemical study has yet reported the ratio of cis and trans isomers produced. Herein, we compare the chemical, lead-based route to 2,5-diacetoxy-2,5-dihydrofuran with a fully described electrosynthesis method. In doing so, we have discovered that the cis and trans isomers of this compound were previously incorrectly assigned in the literature, an error that we correct by obtaining the crystal structure of cis-2,5-diacetoxy-2,5-dihydrofuran. This allows the ratios of the isomers as prepared by the chemical (2 : 1 cis : trans) and electrochemical (7 : 5 cis : trans) methods to be obtained. Through experimental and computational insights, we propose a mechanism for the electrochemical synthesis of 2,5-dicarboxy-2,5-dihydrofurans and go some way towards validating this mechanism by synthesizing 2,5-dibutoxy-2,5-dihydrofuran electrochemically for the first time. We hope that these findings will provide some greater clarity to the literature surrounding the electrosynthesis and potential applications of 2,5-dicarboxy-2,5-dihydrofurans

Anion‐π catalysis enabled by the mechanical bond

We report a series of rotaxane-based anion–π catalysts in which the mechanical bond between a bipyridine macrocycle and an axle containing an NDI unit is intrinsic to the activity observed, including a [3]rotaxane that catalyses an otherwise disfavoured Michael addition in >60 fold selectivity over a competing decarboxylation pathway that dominates under Brønsted base conditions. The results are rationalized by detailed experimental investigations, electrochemical and computational analysis

How can we optimise inhaled beta2 agonist dose as ‘reliever’ medicine for wheezy pre-school children? Study protocol for a randomised controlled trial

Background: Asthma is a common problem in children and, if inadequately controlled, may seriously diminish their quality of life. Inhaled short-acting beta2 agonists such as salbutamol are usually prescribed as ‘reliever’ medication to help control day-to-day symptoms such as wheeze. As with many medications currently prescribed for younger children (defined as those aged 2 years 6 months to 6 years 11 months), there has been no pre-licensing age-specific pharmacological testing; consequently, the doses currently prescribed (200–1000 μg) may be ineffective or likely to induce unnecessary side effects. We plan to use the interrupter technique to measure airway resistance in this age group, allowing us for the first time to correlate inhaled salbutamol dose with changes in clinical response. We will measure urinary salbutamol levels 30 min after dosing as an estimate of salbutamol doses in the lungs, and also look for genetic polymorphisms linked to poor responses to inhaled salbutamol. Methods: This is a phase IV, randomised, controlled, observer-blinded, single-centre trial with four parallel groups (based on a sparse sampling approach) and a primary endpoint of the immediate bronchodilator response to salbutamol so that we can determine the most appropriate dose for an individual younger child. Simple randomisation will be used with a 1:1:1:1 allocation. Discussion: The proposed research will exploit simple, non-invasive and inexpensive tests that can mostly be performed in an outpatient setting in order to help develop the evidence for the correct dose of salbutamol in younger children with recurrent wheeze who have been prescribed salbutamol by their doctor. Trial registration: EudraCT2014-001978-33, ISRCTN15513131. Registered on 8 April 2015

Proton-coupled electron transfer enhances the electrocatalytic reduction of nitrite to NO in a bioinspired copper complex

This work was supported by the EPSRC (Grant No. EP/ K031732/1) and the Royal Society (University Research Fellowship UF150104 to M.D.S.). The data which underpin this work are available at http://dx.doi.org/10.5525/gla. researchdata.590 and are available under a CC-BY licence.The selective and efficient electrocatalytic reduction of nitrite to nitric oxide (NO) is of tremendous importance, both for the development of NO-release systems for biomedical applications and for the removal of nitrogen oxide pollutants from the environment. In nature, this transformation is mediated by (among others) enzymes known as the copper-containing nitrite reductases. The development of synthetic copper complexes that can reduce nitrite to NO has therefore attracted considerable interest. However, there are no studies describing the crucial role of proton-coupled electron transfer during nitrite reduction when such synthetic complexes are used. Herein, we describe the synthesis and characterization of two previously unreported Cu complexes ( 3 and 4 ) for the electrocatalytic reduction of nitrite to NO, in which the role of proton-relaying units in the secondary coordination sphere of the metal can be probed. Complex 4 bears a pendant carboxylate group in close proximity to the copper center, while complex 3 lacks such functionality. Our results suggest that complex 4 is twice as effective an electrocatalyst for nitrite reduction than is complex 3 and that complex 4 is the best copper-based molecular electrocatalyst for this reaction yet discovered. The differences in reactivity between 3 and 4 are probed using a range of electrochemical, spectroscopic, and computational methods, which shed light on the possible catalytic mechanism of 4 and implicate the proton-relaying ability of its pendant carboxylate group in the enhanced reactivity that this complex displays. These results highlight the critical role of proton-coupled electron transfer in the reduction of nitrite to NO and have important implications for the design of biomimetic catalysts for the selective interconversions of the nitrogen oxides.Publisher PDFPeer reviewe

Assessing the cost of global biodiversity and conservation knowledge

Knowledge products comprise assessments of authoritative information supported by stan-dards, governance, quality control, data, tools, and capacity building mechanisms. Considerable resources are dedicated to developing and maintaining knowledge productsfor biodiversity conservation, and they are widely used to inform policy and advise decisionmakers and practitioners. However, the financial cost of delivering this information is largelyundocumented. We evaluated the costs and funding sources for developing and maintain-ing four global biodiversity and conservation knowledge products: The IUCN Red List ofThreatened Species, the IUCN Red List of Ecosystems, Protected Planet, and the WorldDatabase of Key Biodiversity Areas. These are secondary data sets, built on primary datacollected by extensive networks of expert contributors worldwide. We estimate that US$160million (range: US$116–204 million), plus 293 person-years of volunteer time (range: 278–308 person-years) valued at US$14 million (range US$12–16 million), were invested inthese four knowledge products between 1979 and 2013. More than half of this financingwas provided through philanthropy, and nearly three-quarters was spent on personnelcosts. The estimated annual cost of maintaining data and platforms for three of these knowl-edge products (excluding the IUCN Red List of Ecosystems for which annual costs were notpossible to estimate for 2013) is US$6.5 million in total (range: US$6.2–6.7 million). We esti-mated that an additional US$114 million will be needed to reach pre-defined baselines ofdata coverage for all the four knowledge products, and that once achieved, annual mainte-nance costs will be approximately US$12 million. These costs are much lower than those tomaintain many other, similarly important, global knowledge products. Ensuring that biodi-versity and conservation knowledge products are sufficiently up to date, comprehensiveand accurate is fundamental to inform decision-making for biodiversity conservation andsustainable development. Thus, the development and implementation of plans for sustain-able long-term financing for them is critical

Generation lengths of the world's birds and their implications for extinction risk

Birds have been comprehensively assessed on the International Union for Conservation of Nature (IUCN) Red List more times than any other taxonomic group. However, to date, generation lengths have not been systematically estimated to scale population trends when undertaking assessments, as required by the criteria of the IUCN Red List. We compiled information from major databases of published life-history and trait data for all birds and imputed missing life-history data as a function of species traits with generalized linear mixed models. Generation lengths were derived for all species, based on our modeled values of age at first breeding, maximum longevity, and annual adult survival. The resulting generation lengths varied from 1.42 to 27.87 years (median 2.99). Most species (61%) had generation lengths <3.33 years, meaning that the period of 3 generations—over which population declines are assessed under criterion A—was <10 years, which is the value used for IUCN Red List assessments of species with short generation times. For these species, our trait-informed estimates of generation length suggested that 10 years is a robust precautionary value for threat assessment. In other cases, however, for whole families, genera, or individual species, generation length had a substantial impact on their estimated extinction risk, resulting in higher extinction risk in long-lived species than in short-lived species. Although our approach effectively addressed data gaps, generation lengths for some species may have been underestimated due to a paucity of life-history data. Overall, our results will strengthen future extinction-risk assessments and augment key databases of avian life-history and trait data

Scaphoid Waist Internal Fixation for Fractures Trial (SWIFFT) protocol : a pragmatic multi-centre randomised controlled trial of cast treatment versus surgical fixation for the treatment of bi-cortical, minimally displaced fractures of the scaphoid waist in adults

BACKGROUND: A scaphoid fracture is the most common type of carpal fracture affecting young active people. The optimal management of this fracture is uncertain. When treated with a cast, 88 to 90 % of these fractures unite; however, for the remaining 10-12 % the non-union almost invariably leads to arthritis. The alternative is surgery to fix the scaphoid with a screw at the outset. METHODS/DESIGN: We will conduct a randomised controlled trial (RCT) of 438 adult patients with a "clear" and "bicortical" scaphoid waist fracture on plain radiographs to evaluate the clinical effectiveness and cost-effectiveness of plaster cast treatment (with fixation of those that fail to unite) versus early surgical fixation. The plaster cast treatment will be immobilisation in a below elbow cast for 6 to 10 weeks followed by mobilisation. If non-union is confirmed on plain radiographs and/or Computerised Tomogram at 6 to 12 weeks, then urgent surgical fixation will be performed. This is being compared with immediate surgical fixation with surgeons using their preferred technique and implant. These treatments will be undertaken in trauma units across the United Kingdom. The primary outcome and end-point will be the Patient Rated Wrist Evaluation (a patient self-reported assessment of wrist pain and function) at 52 weeks and also measured at 6, 12, 26 weeks and 5 years. Secondary outcomes include an assessment of radiological union of the fracture; quality of life; recovery of wrist range and strength; and complications. We will also qualitatively investigate patient experiences of their treatment. DISCUSSION: Scaphoid fractures are an important public health problem as they predominantly affect young active individuals in the more productive working years of their lives. Non-union, if untreated, can lead to arthritis which can disable patients at a very young age. There is a rapidly increasing trend for immediate surgical fixation of these fractures but there is insufficient evidence from existing RCTs to support this. The SWIFFT Trial is a rigorously designed and adequately powered study which aims to contribute to the evidence-base to inform clinical decisions for the treatment of this common fracture in adults. TRIAL REGISTRATION: The trial is registered with the International Standard Randomised Controlled Trial Register ( ISRCTN67901257 ). Date registration assigned was 13/02/2013